Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.9 CrAdmitted-Finance | ₹4.9 Cr | L1 | Admitted-Finance |
| 2 | L2₹5.5 Cr+₹64.6 L (13.2%)Admitted-Finance BHARSALA PARA NABAPALLY P O P S RAMPURHAT DIST BIRBHUM WB PIN 731224 | RAMPURHAT | BIRBHUM | WEST BENGAL | 731224 | ₹5.5 Cr+₹64.6 L (13.2%) | L2 | Admitted-Finance |
| 3 | L3₹5.9 Cr+₹1.0 Cr (20.7%)Admitted-Finance | ₹5.9 Cr+₹1.0 Cr (20.7%) | L3 | Admitted-Finance |
| 4 | L4₹6.2 Cr+₹1.3 Cr (26.1%)Admitted-Finance | ₹6.2 Cr+₹1.3 Cr (26.1%) | L4 | Admitted-Finance |
| 5 | L5₹6.2 Cr+₹1.3 Cr (27.4%)Admitted-Finance 233 PLATINUM PLAZA OPP IOCL PUMP NR JUDGES BUNGLOW CROSS ROAD BODAKDEV AHMEDABAD GUJARAT 380054 | AHMADABAD | GUJARAT | 380054 | ₹6.2 Cr+₹1.3 Cr (27.4%) | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | EVERCREST PROJECTS PVT LTD. L5 | National Construction L2 | aselectric corporation L3 | Yogiraj Powertech Pvt Ltd. L7 | SARASWAT ENGINEERING SERVICES L6 | Moon Light L1 | Kalpataru L4 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00Supply, Installation, Testing and Commissioning of following configuration 415V, 3-phase, 4 wire, Pre-wired with HFFR copper wires, IP-54, MCB Distribution Board fabricated out of 2mm thick Pre Galvanised GI sheet steel, powder coated with RAL7035 shade, suitable for surface mounting complete with fork/comb type tinned Copper busbar, earth bar, din bar for MCB mounting, 2 mm thick removable gland plate on both top and bottom side with required number of knock out holes, neoprene gasket, check-nuts etc. as required as per SLD and technical specifications | ||||||||||
| 1.10TPN MCB DB with Incomer of 16A, Isc=10kA, Type C, (100mA) 16A DP RCBO for each phase and 24 Nos of 6A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification | ||||||||||
| 1.11 | Supply | 6 | Nos | 37,191 ₹2,23,146 | 45,000 ₹2,70,000 | 47,563 ₹2,85,378 | 36,323 ₹2,17,938 | 31,534 ₹1,89,204 | 71,390 ₹4,28,340 | 17,552 ₹1,05,312 Lowest |
| 1.12 | Installation | 6 | Nos | 1,416 ₹8,496 | 1,250 ₹7,500 | 2,292 ₹13,752 | 1,086 ₹6,516 Lowest | 2,405 ₹14,430 | 2,124 ₹12,744 | 2,632.8 ₹15,796.8 |
| 1.20TPN MCB DB with Incomer of 40A, Isc=10kA, Type C, (100mA) 40A DP RCBO for each phase and 24 Nos of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification | ||||||||||
| 1.21 | Supply | 2 | Nos | 36,249 ₹72,498 | 50,000 ₹1,00,000 | 49,893 ₹99,786 | 37,065 ₹74,130 | 35,188 ₹70,376 | 73,160 ₹1,46,320 | 19,307.2 ₹38,614.4 Lowest |
| 1.22 | Installation | 2 | Nos | 1,534 ₹3,068 | 1,250 ₹2,500 | 1,965 ₹3,930 | 1,086 ₹2,172 Lowest | 2,405 ₹4,810 | 2,124 ₹4,248 | 2,632.8 ₹5,265.6 |
| 1.30TPN MCB DB with Incomer of 40A, Isc=10kA, Type C, (100mA) 40A DP RCBO for each phase and 18 Nos of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification | ||||||||||
| 1.31 | Supply | 1 | Nos | 33,742 ₹33,742 | 45,000 ₹45,000 | 43,962 ₹43,962 | 34,390 ₹34,390 | 34,227 ₹34,227 | 68,440 ₹68,440 | 17,113.2 ₹17,113.2 Lowest |
| 1.32 | Installation | 1 | Nos | 1,534 ₹1,534 | 1,250 ₹1,250 | 1,965 ₹1,965 | 1,086 ₹1,086 Lowest | 2,405 ₹2,405 | 2,124 ₹2,124 | 2,632.8 ₹2,632.8 |
Tender Value
₹5.8 Cr
EMD Value
₹11.7 L
Closing Date
29 Jul 2024, 4:00 pmClosed
Project Director INRPC
Project Director INRPC BARC Tarapur
Building Electrification works of Block 105 at INRP Site Tarapur
2024_NRB_814615_1
BARC(T)/NRB/INRPC/ELE-60/2024
Open Tender
Electrical Works
Item Rate
335 days
BARC Tarapur
As per tender document
3 documents required · 3 mandatory
₹0
₹11.7 L
PD Office Conference Room
22 Apr 2025
3 Jul 2024
31 Jul 2024
3 Jul 2024
29 Jul 2024
3 Jul 2024
3 Jul 2024 - 8 Jul 2024
9 Jul 2024
Amount
Supply, Installation, Testing and Commissioning of following configuration 415V, 3-phase, 4 wire, Pre-wired with HFFR copper wires, IP-54, MCB Distribution Board fabricated out of 2mm thick Pre Galvanised GI sheet steel, powder coated with RAL7035 shade, suitable for surface mounting complete with fork/comb type tinned Copper busbar, earth bar, din bar for MCB mounting, 2 mm thick removable gland plate on both top and bottom side with required number of knock out holes, neoprene gasket, check-nuts etc. as required as per SLD and technical specifications
TPN MCB DB with Incomer of 16A, Isc=10kA, Type C, (100mA) 16A DP RCBO for each phase and 24 Nos of 6A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification
Supply
Installation
TPN MCB DB with Incomer of 40A, Isc=10kA, Type C, (100mA) 40A DP RCBO for each phase and 24 Nos of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification
Supply
Installation
TPN MCB DB with Incomer of 40A, Isc=10kA, Type C, (100mA) 40A DP RCBO for each phase and 18 Nos of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification
Supply
Installation
TPN MCB DB with Incomer of 25A, Isc=10kA, Type C, (100mA) 25A DP RCBO for each phase and 18 Nos of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification
Supply
Installation
TPN MCB DB with Incomer of 16A, Isc=10kA, Type C, (100mA) 16A DP RCBO for each phase and 18 Nos of 6A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification
Supply
Installation
TPN MCB DB with Incomer of 25A, Isc=10kA, Type C, (100mA) 25A DP RCBO for each phase and 12 Nos of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification
Supply
Installation
TPN MCB DB with Incomer of 16A, Isc=10kA, Type C, (100mA) 16A DP RCBO for each phase and 12 Nos of 6A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification
Supply
Installation
Supply, Installation, Testing and Commissioning of following configuration 240V, 1-phase, 2 wire, Pre-wired with HFFR copper wires, IP-54, MCB Distribution Board fabricated out of 2mm thick Pre Galvanised GI sheet steel, powder coated with RAL7035 shade, suitable for surface mounting complete with fork/comb type tinned Copper busbar, earth bar, din bar for MCB mounting, 2 mm thick removable gland plate on both top and bottom side with required number of knock out holes, neoprene gasket, check-nuts etc. as required as per SLD and technical specifications
DP MCB DB with Incomer of 40A, Isc=10kA, Type C and 12 Nos of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification
Supply
Installation
DP MCB DB with Incomer of 25A, Isc=10kA, Type C and 8 Nos of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification
Supply
Installation
DP MCB DB with Incomer of 25A, Isc=10kA, Type C and 6 Nos of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification
Supply
Installation
DP MCB DB with Incomer of 16A, Isc=10kA, Type C and 12 Nos of 6A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification
Supply
Installation
DP MCB DB with Incomer of 16A, Isc=10kA, Type C and 8 Nos of 6A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification
Supply
Installation
DP MCB DB with Incomer of 16A, Isc=10kA, Type C and 6 Nos of 6A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification
Supply
Installation
Supply, Installation, Testing and Commissioning of LED light fittings complete with light fitting accessories, including supply of fixing accessories, twin twisted tinned 1.5 sq. mm copper flexible cords for terminal connections, 16 SWG copper wire for earthing , flexible GI metallic conduit sleeves, PVC conduit bushes, cable lugs and testing and commissioning as per technical specification
4ft Batten with 2x18 Watt LED Tube and suitable connector with a nominal system lumen output of 4200 lumens and a minimum system efficacy not less than 115 lm/W. The luminaire should have CCT 6500K and CRI > 80. The luminaire shall meet IP20 rating with THD < 20% and PF > 0.9. The batten luminaire housing should made of white powder coated CRCA sheet steel
Supply
Installation
4ft Slim LED Batten with a nominal system lumen output of 2100 lumens and a minimum system efficacy of 115 lm/W provided with suitable connector. The luminaire should have CCT 6500K and CRI > 80. The luminaire shall meet IP20 protection rating with THD < 20% and PF > 0.9. The luminaire housing should made of Extruded Aluminium with extruded PC diffuser & should have anodised finish. The total power consumption should not exceed 19W (including driver)
Supply
Installation
6.5 Watt LED Bulkhead fitting with nominal system lumen output of 700 lumens and a minimum system efficacy of 105 lm/W. The luminaire should have CCT 6500K and CRI > 80. The luminaire shall meet IP65 rating and IK 08 rating PF > 0.9. The luminaire housing should made of High pressure die cast Aluminium with high quality PMMA diffuser
Supply
Installation
15 Watt LED Mirror optic fitting with a nominal system output 1600 lumens and a minimum system efficacy of not less than 115 lm/W. The luminaire should have CCT 6500K and CRI > 80. The luminaire shall meet IP20 rating with THD < 15% and PF >0.9. The luminaire housing should be made of polycarbonate with high efficiency diffuser
Supply
Installation
32 Watt Recessed 2ft x 2ft LED luminaire with nominal system output 4000 lumens and having system efficacy > 125 lm/W, THD < 10%, Power Factor > 0.95, CRI >80, CCT 6500K, SCDM <= 4, CRCA housing, high efficiency opal diffuser and IP20 protection
Supply
Installation
80 Watt LED Highbaybay light of wide angle not less than 90 degree with a nominal system lumen output of min 10300 lumens and a minimum system efficacy of 125 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have a color temperature of 6500K and CRI > 80 and SDCM < 5. The luminaire shall meet IP65 and IK 08 rating with THD < 10% and PF > 0.95 and in-built surge protection of 4kV. The luminaire should be tested from NABL accredated LAB and should have proper IES file. The luminaire housing should be made of High Pressure die cast Aluminium having gasket of heat proof silicone rubber ring
Supply
Installation
36 Watt LED integral driver Flood light for Outdoor Lighting having housing of high pressure Die cast Aluminium, Lumen ≥ 3500, Efficacy > 110 lm/W, CRI ≥ 70, CCT - 5700 K, PF ≥ 0.95, THD < 10%, IP65 protection and Surge protection upto minimum 4 KV
Supply
Installation
132 Watt LED Highbaybay light of wide angle not less than 90 degree with a nominal system lumen output of min 16500 lumens and a minimum system efficacy of 125 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have a color temperature of 6500K and CRI > 80 and SDCM < 5. The luminaire shall meet IP65 and IK 08 rating with THD < 10% and PF > 0.95 and in-built surge protection of 4kV. The luminaire should be tested from NABL accredated LAB and should have proper IES file. The luminaire housing should be made of High Pressure die cast Aluminium having gasket of heat proof silicone rubber ring
Supply
Installation
157 Watt LED Highbaybay light of wide angle not less than 90 degree with a nominal system lumen output of min 19500 lumens and a minimum system efficacy of 125 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have a color temperature of 6500K and CRI > 80 and SDCM < 5. The luminaire shall meet IP65 and IK 08 rating with THD < 10% and PF > 0.95 and in-built surge protection of 4kV. The luminaire should be tested from NABL accredated LAB and should have proper IES file. The luminaire housing should be made of High Pressure die cast Aluminium having gasket of heat proof silicone rubber ring
Supply
Installation
35 Watt LED Recessed 1ft x 4ft Troffer Luminaire with a nomial system lumen output of 3200 lumens and a minimum system efficacy of 90 lm/W. The luminaire should have a color temperature of 6500K and CRI > 80. The luminaire shall meet IP20 rating with THD < 15% and PF > 0.9. The luminaire housing should made of powder coated metallic CRCA with high efficiency opal diffuser
Supply
Installation
Linear 4ft, 40 Watt LED Tube with corrossion proof fitting having nominal system lumen output of 4000 lumens and a minimum system efficacy not less than 110 lm/W. The luminaire should have a color temperature of 6500K and CRI > 80. The luminaire shall meet IP 65 rating with THD < 15% and PF > 0.95. The luminaire housing should be made of Polycarbonate and mounting accessories shall be of stainless steel
Supply
Installation
2x36 Watt, LED flame proof industrial luminaire suitable for wall mounting complete with heat resistant and toughened clear flat glass cover, SS frame on front side, die cast aluminium alloy constructed, IP 65 protection, PESO (CCOE) certified and conforming to IS / IEC 60079-1:2007, and as per technical specification
Supply
Installation
140 Watt LED integral driver Flood light for Outdoor Lighting having housing of high pressure Die cast Aluminium, Lumen ≥ 15000, Efficacy > 105 lm/W, CRI ≥ 70, CCT - 5700 K, PF ≥ 0.95, THD < 10%, IP65 protection and Surge protection upto minimum 4 KV. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should be tested from NABL accredated LAB and should have proper IES file
Supply
Installation
150W, 240V, 50Hz, Metal halide lamp with non integral type control gear box with complete accessories for cell lighting, CCT - 4500K. The luminaire must be designed to contain hot lamp parts if lamp ruptures and cap-base E40, life to 50% failure - 20000 Hrs nominal complied to IEC61167, IEC62035, IEC60598
Supply
Installation
Supply and Installation of the following Industrial switches / MCB with face plate 1.6 mm thick (in the existing recess mounted GI Box) and Decorative switches with polycarbonate Box and face plate as per technical specification
1 Nos of 6A, Single Pole, Isc=10kA, Type C-Curve, Industrial Switch/ MCB along with pre- Galvanised powder coated GI sheet steel Face Plate and suitable DIN rail and mounting arrangements as per technical specification
Supply
Installation
1 Nos of 6A, Single Pole, Modular type Decorative Switch with Polycarbonate box, heavy duty polycarbonate face plate and suitable mounting arrangements as per technical specification
Supply
Installation
2 Nos of 6A, Single Pole, Isc=10kA, Type C-Curve, Industrial Switch/ MCB along with pre- Galvanised powder coated GI sheet steel Face Plate and suitable DIN rail and mounting arrangements as per technical specification
Supply
Installation
3 Nos of 6A, Single Pole, Modular type Decorative Switch with Polycarbonate box, heavy duty polycarbonate face plate and suitable mounting arrangements as per technical specification
Supply
Installation
Supply and Installation of the following MCB / Industrial switches and plug sockets with suitable plug tops (3-pin) in the exisitng recess mounted GI Box and 3 pin domestic plug sockets with suitable polycarbonate box, face plate 1.6 mm thick, switch and plug tops as per technical specification
1 Nos of 10A and 1 Nos of 20A, Single phase Industrial Socket with Isc=10kA, Type C-Curve, Industrial type MCB for each Socket along with pre- Galvanised powder coated GI sheet steel Face Plate, Industrial Plug Tops and suitable DIN rail and mounting arrangementsas per technical specification
Supply
Installation
1 no of 10A and 1 no of 20A, Single phase Modular Decorative Type Socket with Polycarbonate box, Switch for each Socket and heavy duty polycarbonate Face Plate, plug tops and suitable mounting arrangements as per technical specification.
Supply
Installation
Supply and surface conduiting of 14 SWG heavy duty rigid GI conduit pipe of 25mm sizes along with all accessories such as inspection bends, junction box, socket, check nut, GI spacer saddle etc. including making threads, removing burrs, connection of accessories, drawing of fish wire . as required under the instruction of Engineer-In-Charge
Supply
Installation
Supply and laying of 14 SWG tinned solid copper conductor throughout along the conduit including fixing with ties, brazing etc as required
Supply
Installation
Supply and laying of 95 sqmm Class-2 stranded tinned ETP grade copper conductor in RCC trench/ underground upto depth of 1 meter, connection with earth pit at one end and conductor tail at other end, including clamping, brazing, connection etc as per instructions by Engineer-In-Charge
Supply
Installation
Supply and laying of 10 sqmm Copper PVC insulated earthing conductor in 40 mm HDPE pipe (HDPE supply excluded) on surface / existing concealed including clamping / cleating on wall, making chase, repairing same etc as per directions of Engineer-In-Charge
Supply
Installation
Supply and surface / concealed laying of tinned copper conductor of various sizes, connection with earth pad at one end and DB / motor / cable tray at other end and clamping, brazing etc as per directions of Engineer-In-Charge
150 sqmm stranded bare tinned copper conductor
Supply
Installation
95 sqmm stranded bare tinned copper conductor
Supply
Installation
70 sqmm stranded bare tinned copper conductor
Supply
Installation
16 sqmm stranded bare tinned copper conductor
Supply
Installation
10 sqmm stranded bare tinned copper conductor
Supply
Installation
6 sqmm stranded bare tinned copper conductor
Supply
Installation
4 sqmm stranded bare tinned copper conductor
Supply
Installation
2.5 sqmm stranded bare tinned copper conductor
Supply
Installation
Supply and fixing of 25 mm x 3 mm thick tinned copper strip including connection / terminating with nut, bolt, spring, washer etc as per technical specification
Supply
Installation
Supply and fixing of 25 mm x 6 mm GI strip along tray using suitable size GI saddle / clamp including interconnection with nut, bolt, spring, washer etc as per technical specification
Supply
Installation
Supply of tinned Cu Lugs as per technical specification
150 sqmm stranded bare tinned copper conductor
95 sqmm stranded bare tinned copper conductor
70 sqmm stranded bare tinned copper conductor
16 sqmm stranded bare tinned copper conductor
10 sqmm stranded bare tinned copper conductor
6 sqmm stranded bare tinned copper conductor
4 sqmm stranded bare tinned copper conductor
2.5 sqmm stranded bare tinned copper conductor
14 SWG solid bare tinned copper conductor
Supply and drawing of 1Pair X 1.5 sqmm twisted pair PVC insulated, FRLS PVC outer sheath, stranded copper conductor, flexible cable in existing laid concealed / surface conduit as per technical specification
Supply
Installation
Supply of Single Core HFFR PVC insulated wires (Copper) of size mentioned below in voltage grade 1100 V as per the IS: 3961 (part V) - 1968. As per conductor class 2 of IS: 8130 / 1984 as per technical specification
Installation/drawing through concealed/ surface conduit and wiring and termination at both ends of Single Core HFFR/ FRLS PVC wires (Copper) of size mentioned below in voltage grade 1100 V as per the IS: 3961 (part V ) - 1968. As per conductor class 2 of IS: 8130 / 1984 as per technical specification
Supply, Fabrication and Installation of Standard steel sections as per IS 2062 Grade B0 for cable tray supports including supply of GI rod along with accessories, fittings, nut - bolts etc for cable tray support, chequered plates for trench covers, base frames for panels, anchor fasters, wall frames and brackets for supporting equipment. Fabrication shall include drilling, entiling, welding wire brush cleaning, testing DPT etc ,supply of all consumables like gas, approved make welding rods as per tender tech spec. After fabrication two coats of epoxy based primer and two coats of finish paints shall be applied and as per technical specification
Supply
Installation
Vertical air termination made up of 20mm dia, 1 mtr long copper rod attached to 50mm dia. Copper sphere having drilled and tapped holes for fixing 5 Nos of 150mm long spikes
Supply
Installation
Supply and laying of 100 Pair X 0.5 mm dia, annealed high conductivity electrolytic copper, polythene insulated, color coded, twisted into pairs, FRLS PVC outer sheath, high conductivity annealed solid copper conductor, armoured telephone cable on cable tray in trench or overhead or cleating on wall/ceiling,including tying, clamping, puting cable tag, marking, glands, termination and other accessories, etc as per technical specification
Supply
Installation
Supply and surface mounting of indoor type double enclosure Junction Box fabricated with 2mm thick GI sheet steel with 200 + 200 indoor type TTB KRONE block suitable for connection of 0.9 mm dia wire with insertion tool mounted in suitable size enclosure
Supply
Installation
Supply and surface mounting of indoor type double enclosure Junction Box fabricated with 2mm thick GI sheet steel with 100 + 100 indoor type TTB KRONE block suitable for connection of 0.9 mm dia wire with insertion tool mounted in suitable size enclosure
Supply
Installation
Prefabricted powder coated GI box to accommodate 2 Nos modular type RJ11 socket unit suitable for concealing or surface mounting
Supply
Installation
Front plate with 2 Nos of modular type RJ11 socket unit
Supply
Installation
Junction box / Cable pull box fabricated out of 2 mm thick GI sheet steel, punched hole for conduit entry on all sides, 4 nos of terminals of 4 sqmm etc as per technical specification
Supply
Installation
Junction box / Cable pull box fabricated out of 2 mm thick GI sheet steel, punched hole for conduit entry on all sides and cable of size 20 pair x 1.5 sqmm with 50 Nos of terminals of 4 sqmm, mounting arrangement etc as per technical specification
Supply
Installation
Junction box / Cable pull box shall be weather proof type (IP66), fabricated out of 2 mm thick GI sheet steel, cable gland plate at the bottom, suitable to terminate 2 Nos of 3 Core x 2.5 sqmm cable and with 8 Nos of terminals, etc as per technical specification
Supply
Installation
Hot dip galvanised ladder type cable tray fabricated out of 2.5mm thick sheet steel having various width (W) and side channel (SH), rungs spaced at 250mm, single length not less than 2.5mtr with two coupling/joint plates per tray length having one long groove for adjustment with all suitable accessories ( couplers / tees / bends / cross member / connectors, nuts and bolts ) as per attached technical specification
750 mm (W) 100 mm (SH)
Supply
Installation
450 mm (W) 100 mm (SH)
Supply
Installation
300 mm (W) 100 mm (SH)
Supply
Installation
150 mm (W) 50 mm (SH)
Supply
Installation
Hot dip galvanised perforated type cable tray fabricated out of 2.5mm thick sheet steel having various width (W) and side channel (SH), cross perforation not more than 17.5%, single length not less than 2.5mtr with two coupling/joint plates per tray length having one long groove for adjustment with all suitable accessories ( couplers / tees / bends / cross member / connectors, nuts and bolts ) as per attached technical specification
450 mm (W) 100 mm (SH)
Supply
Installation
300 mm (W) 100 mm (SH)
Supply
Installation
150 mm (W) 50 mm (SH)
Supply
Installation
FRP ladder type 5mm thick cable tray having various width (W) and side channel (SH), rungs spaced at 250mm, single length not less than 2.5mtr with two coupling/joint plates per tray length having one long groove for adjustment with all suitable accessories ( couplers / tees / bends / cross member / connectors, nuts and bolts ) as per attached technical specification
450 mm (W) 100 mm (SH)
Supply
Installation
300 mm (W) 100 mm (SH)
Supply
Installation
150 mm (W) 50 mm (SH)
Supply
Installation
FRP perforated type 5mm thick cable tray having various width (W) and side channel (SH), rungs spaced at 250mm, single length not less than 2.5mtr with two coupling/joint plates per tray length having one long groove for adjustment with all suitable accessories ( couplers / tees / bends / cross member / connectors, nuts and bolts ) as per attached technical specification
450 mm (W) 100 mm (SH)
Supply
Installation
300 mm (W) 100 mm (SH)
Supply
Installation
150 mm (W) 50 mm (SH)
Supply
Installation
Supply of Hot dip galvanised cable tray cover of following width fabricated out of 2.5mm thick sheet steel, single length not less than 2.5mtr with required arrangement for clamping with cable tray
Supply of 40 mm, 6 kg/m² HDPE pipe and as per technical specification
Supply and installation of GI anchor fastener of size M12x150 mm by drilling through concrete block as per site requirement for fixing plate EP's or other structure as per technical specification
Supply
Installation
Supply and installation of GI anchor fastener of size M16x150 mm by drilling through concrete block as per site requirement for fixing plate EP's or other structure as per technical specification
Supply
Installation
Water based fire stop / fire barrier with min 3 Hr fire rating for cable opening and suitable for retrofitting along with fire sealant, making frames, finishing etc required as per technical specification
Supply
Installation
Fire retardent cable coating paint with min 30 min fire rating for horizontal and vertical cable runs as per technical specification
Supply
Installation
Installation of Power Cables (A2XWY ( P ) / 2XWY (P) as mentioned below), Multistranded, round wire Armoured, XLPE insulated, cores laid up with inner sheath and outer sheath FRLS PVC (ST-2 type), of 1.1 kV grade as per IS 7098 ( part - 1 ) 1988
4C x 16 sqmm Cu
4C x 10 sqmm Cu
4C x 6 sqmm Cu
4C x 4 sqmm Cu
4C x 2.5 sqmm Cu
2C x 25 sqmm Cu
2C x 16 sqmm Cu
2C x 4 sqmm Cu
2C x 2.5 sqmm Cu
Supply of copper lug suitable for cable of following size multistranded, round wire Armoured, XLPE insulated power cables as mentioned below. Set means 4 Nos of lug at one end of cable
4C x 16 sqmm Cu
4C x 10 sqmm Cu
4C x 6 sqmm Cu
4C x 4 sqmm Cu
4C x 2.5 sqmm Cu
2C x 25 sqmm Cu
2C x 16 sqmm Cu
2C x 4 sqmm Cu
2C x 2.5 sqmm Cu
Supply of Brass Double Compression type cable gland, suitable for multistranded, round wire Armoured, XLPE insulated power cables of sizes mentioned below
4C x 16 sqmm Cu
4C x 10 sqmm Cu
4C x 6 sqmm Cu
4C x 4 sqmm Cu
4C x 2.5 sqmm Cu
2C x 25 sqmm Cu
2C x 16 sqmm Cu
2C x 4 sqmm Cu
2C x 2.5 sqmm Cu
Glanding and end termination of following size power cables
4C x 16 sqmm Cu
4C x 10 sqmm Cu
4C x 6 sqmm Cu
4C x 4 sqmm Cu
4C x 2.5 sqmm Cu
2C x 25 sqmm Cu
2C x 16 sqmm Cu
2C x 4 sqmm Cu
2C x 2.5 sqmm Cu
National Construction (BID ID -3052333)
Kalpataru (BID ID -3047476)
EVERCREST PROJECTS PVT LTD. (BID ID -3050692)
SARASWAT ENGINEERING SERVICES (BID ID -3060366)
Yogiraj Powertech Pvt Ltd. (BID ID -3052581)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.49 MB
Tenderdoc60.pdf
Tender Documents • 16.04 MB
TechnicalBid60CPPP.xls
Tender Documents • 0.17 MB
BOQ_856092.xls
BOQ • 0.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .