SPECIAL REPAIR TO 31 SUB AREA SINGLE OFFICER S ACCOMMODATION BUILDING NO P 526 AT HQ 31 SUB AREA AT BB CANTT, SRINAGAR

Taking down chowkats or frames n exc 1.5 Sqm each ( without taking off shutters from the frames), complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm but n. exc 4.00 Sqm each( without taking off shutters from the frames), complete all as specified and directed.

Taking down shutters of any description n exc 1sqm but n exc 2 sqm each, complete all as specified and directed.

S&F anodised aluminium powder coated (minimum 50 micron thickness) door shutter with frame, glazed with 5.5mm thick tinted glass including rubber bead, joining cleat for fixing, aluminium door handle 150mm size and tower bolt 200mm size,where required double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing brass pivot, mortice lock vertical type of mild steel 4 levers of size 100mm etc as mentioned here in below complete all as specified and directed.

S & F Aluminium powder coated (powder coated of required colour) three track sliding windows frame top & sides of size 92 x 31.75 x 1.50mm (section No 20831), bottom of size 92 x 31.75 x 1.50mm (section No 20832) and shutter top & bottom of size 40 x 18 x 1.55mm (section No 20736) and side (handle) of size 40 x 18 x 1.55mm (section No 20738) and lock side shutter frame of size 40 x 18 x 1.45mm (sectio No 20737) and for wire guage shutter of size 18 x 43.50 x 1.35mm (Section No.20791) with locking arrangement including stainless steel wire mesh 0.36 mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and providing 5.5mm thick tinted glass with necessary rubber beading gasket and aluminium (anodised) grill, square, ractangular or similar section, fixed with channel of size 38 x 12 x 13mm etc including making good to the disturbed surfaces, complete all as specified and directed.

S & F aluminium (powder coated with approved colour) ventilator, partialy glazed and partialy louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.70 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portaion louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aparture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position and aluminium (anodised) grill, square, ractangular or similar section, fixed with channel of size 38 x 12 x 13mm etc, complete all as specified and directed.

S&F Powder coated Anodised aluminium frame for partations of single groove section size 63.40 x 38.10 x x1.50 mm thick and double groove section size 63.50 x 38.10 x x1.53mm thick including fixing of 5.5 mm thick tinted glass or Aluminium panel sheet with rubber packing complete with one or more rebates including joining cleat, including taking down old partition with glass, complete all as specified and directed.

S & F 2nd class hard wood 35mm thick plain framed panlled shutters (any numbers of panels) of 2nd class hard wood with panels of timber framing is moulded on solid (for each side) or of veenerred particles boards medium density, wood particle board with commercial face veereers, complete all as specified and directed.

S&F solid PVC door frames of size 50mm X 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube, complete all as specified and directed.