Providing and laying of Renewal Coat and Maintenance on road from Drawey to Chrech Block Larnoo Package No JK01246, Length 5.58 Kms PMGSY Division Anantnag.

Amount

Drawey to Chrech Block Larnoo Package No: JK01-246, Length:5.58 Kms

WBM -3: Providing, laying, spreading and compacting graded stone aggregates to water bound macadam specification including spreading in uniform thickness, handpacking, rolling with three wheel roller 80-100 KN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill up the interstices of coarse aggregate, watering and compacting required density , grading 3 as per T.S.C 405 by manual means including loading, unloading, haulage, octeri and royality etc (Finished work to be measured)

Prime Coat: Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502. (Low Porosity)

25mm thick Semidense: Providing and laying of 25 mm thick (Compacted) semidense bituminous concrete surface using crushed stone aggregates of specified grading as per specification and bitumin of grade VG 10 @ 5% by weight of total mix including hot mixing of the stone aggregrate and bitumin in hot mix plant, transporting the mixed material from plant site by mechanical transport upto the site of work, laying the mixed material with payer finisher to required level and grade and rolling with road roller as per MORTH Specification to acheive the desired compaction/density including cost loading/unloading,haulage, and octri etc of all materials complete job involved(Finished work to be measured )

Tack Coat: Providing and applying tack coat with bitumin emulsion RS 1 using emulsion distributor @ 0.25-0.30 Kg per SQM on the prepared dry and hungry bituminous surface cleaned with hydraulic broom as per Technical Specification Clause 503 (By Mechanical Means) including loading, unloading, haulage, octeri and royality etc (Finished work to be measured)

Seal Coat: Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510.Bitumen (S-90) (By Mechanical Means) including loading, unloading, haulage, octeri and royality etc (Finished work to be measured)

Part B: Crate Wall

Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 305 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material, and disposal upto all leads, dressing of side and bottom and back filling in trenches with excavated suitable material. Finished work to be measured.

Providing and Laying of Boulder Apron laid in wire crates with 4 mm dia black anealed wire comforming to IS :280 and IS:4826 in 100 mm X100MM mesh (Woven diagonally) including 10% extra for lapses and joints laid with stone boulders weighing not less than 25 Kg each as per drawing and technical specification clause 1301 including all carriages, leads, lifts and form work costs complete.(Finished work to be measured, complete.)

Back filling behind retaining /breast wall complete as per drawing and technical specification clause 1204.3.8 (granular material available at site) including all carriages, leads, lifts and form work costs complete.(Finished work to be measured, complete.)

Maintenance

AMC for 1st Year

AMC for 2nd Year

AMC for 3rd Year

AMC for 4th Year

AMC for 5th Year

The Contractor has to quote the rates for Construction part without GST and GST @12% shall be added at the time of Allotment.

sicons kashmir