REPAIR, MAINT AND OVERHAULING OF SOLAR WATER HEATER, GEYSERS,CEILING FAN AND FITTING AND FIXTURE DURING WINTER SEASON AT KAMPTEE AND NAGPUR AREA UNDER GE KAMPTEE.

Amount

Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/colour washing/ distemper to match with existing wall/floor/ceiling finishes complete all as specifed and directed.

Taking down sheet metal enclosure DB, MCB, main switch etc and making good disturbed surfaces to match with existing surfaces complete all as specifed and directed.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces complete all as specifed and directed.

M&L point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch.(Cable Make : Finolex, L&T, Legrand, Havells, Polycab) (PVC Conduit Make : Polycab, Anchor, Finolex) Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

As per item No 4 above but One ceiling /exhaust fan point controlled by one switch and regulator complete all as specifed and directed.

As per item No 4 above but One 3 pin 5 amp socket out point on the same board with other switches complete all as specifed and directed.

As per item No 4 above but One 3 pin 5 amps socket out let point on independent board complete all as specifed and directed.

As per item No 4 above but One bell/buzzer point controlled by one bell push complete all as specifed and directed.

All as per item Sl No 4 here in before but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specifed and directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of the following sizes :- 2x2.5 Sqmm with earth wire of 1x2.5 Sqmm. (Cable Make : Finolex, L&T, Legrand, Havells, Polycab) (PVC Conduit Make : Polycab, Anchor, Finolex) Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make.

As per item No 10 above but 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm complete all as specifed and directed.

As per item No 10 above but 2x 6.0 Sqmm with earth wire of 1x6.0 Sqmm complete all as specifed and directed.

As per item No 10 above but 4x 6.0 Sqmm with earth wire of 2x6.0 Sqmm complete all as specifed and directed.

As per item No 10 above but 4x 10.0 Sqmm with earth wire of 2x10.0 Sqmm complete all as specifed and directed.

Supply and fix ceiling rose surface type 2/3 terminal 5 amps Make : Anchor Roma, Legrand, Crabtree complete all as specifed and directed.

S&F Bell ding dong, AC 230 volts, single phase complete all as specifed and directed.

Supply and fix lamp holder insulated body with back plate for angle/ batten fitting complete all as specifed and directed.

Supply and fix Modular switch one way 6A, 1 module complete all as specifed and directed. Make : Anchor Roma, Legrand, Crabtree

Supply and fix Modular switch one way 16A, 1 module complete all as specifed and directed. Make : Anchor Roma, Legrand, Crabtree

Supply and fix Modular bell push 6A, 1 module complete all as specifed and directed. Make :Anchor Roma, Legrand, Crabtree

Supply and fix Modular Socket 6A 2/3 pin combined 2 module complete all as specifed and directed. Make : Anchor Roma, Legrand, Crabtree

Supply & Fix Modular Socket 6A/ 16A 2/3 pin combined 2 module complete all as specifed and directed. Make : Anchor Roma, Legrand, Crabtree

Supply and fix Modular Fan step regulator,120 watt 2 module complete all as specifed and directed. Make : Anchor Roma, Legrand, Crabtree

Supply & Fix modular motor starter 20A , 2 module for AC complete all as specified and directed.

Supply and Fix Highly durable surface mounted 18/20 watts LED batten/surface constructed of fire retardant engineering grade extruded aluminium body 100 lumen per watt, min 2000 lumen and decorative end cap complete with driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories all as specified and directed Make :- Bajaj/ Syska/ Wipro/ Jaquar.

Supply & fix light fitting 9W bulk head luminaries with lamp holders etc complete with all accessories and including connecting up with twin core twisted flexible cable suitable size of 230V, 50HZ ccomplete all as specifed and directed. Make: Bajaj/ Syska/ Wipro/ Jaquar.

Supply & fix fittings with surface mount LED down lighters 12 W including driver with rated voltage 240 V , 50 Hz, complete all as specifed and directed. Make: Bajaj/ Syska/ Wipro/ Jaquar.

Supply and fix Energy efficient surface mounted 2'X2' grid Ceiling LED fitting 36/40 W rated voltage 240 V, 50Hz combination with profiled and flat diffuse complete all as specifed and directed. Make : Bajaj/ Syska/ Wipro/ Jaquar.

Supply and fix LED baton fitting 2' length including drivers having energy consumption, 10/11W ,230 V ,50Hz, 6500K, not less than 800 lumen prewired, complete all as specifed and directed. Make : Bajaj/ Syska/ Wipro/ Jaquar.

LED mirror Light, aesthetically designed with gold body colour high efficieny LED, opaque diffuser, inbuilt driver, suitable for highlighting wall hangings complete all as specified and directed. Shakti cat part No SZWPFPX015or equivalent in philips/wipro/

S&F LED strip 5m long 25W 240V 50Hz with drivers and fixing arrangement complete all as specified and directed. Make: Bajaj/ Syska/ Wipro/ Jaquar.

Supply and fix building security light LED 25 W with Lumen O/P 1800 with driver with rated voltage 240 V, 50Hz,including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc complete all as specifed and directed. Make : Bajaj/ Syska/ Wipro/ Jaquar.

M&L for cutting & taking out the existing surface / sunken box / switch plate with switches / sockets and replacing with Modular metal flush box with modular cover plate with frame 3 module. The following items complete all as specified and directed for: Note:- The disturbed surfaces of wall for concealing box wiring shall be made good by applying cement plaster, putty and colour wash etc matching with the existing surfaces. The rate shall be deemed to include the cost of making good. Switches, sockets, regulators etc to be measured and paid separately.

All as per item no 32 but Modular metal flush box with modular cover plate with frame 4 module complete all as specifed and directed.

All as per item no 32 but Modular metal flush box with modular cover plate with frame 6 module complete all as specifed and directed.

All as per item no 32 but Modular metal flush box with modular cover plate with frame 8 module complete all as specifed and directed.

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 4/6 way with 200 Amp rated bus bar flush /surface mounting double door, complete all as specifed and directed. Make-Legrand/ L&T/ Havells.

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door. complete all as specifed and directed. MakeLegrand/ L&T/ Havells.

Supply and fix sheet metal enclosure triple pole & neutral for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specifed and directed. Make-Legrand/ L&T/ Havells.

Supply and fix sheet metal enclosure vertical triple pole & neutral(VTPN) with MCCB 63 amps for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specifed and directed. Make-Legrand/ L&T/ Havells.

Supply and fix MCB single pole 240 volt 6 to 40 amps 10 KA breaking capacity, 'C' series complete all as specifed and directed. Make-Legrand/ L&T/ Havells.

Supply and fix MCB single pole and neutral 240 volt 6 to40 amps 10 KA breaking capacity, 'C' series, complete all as specifed and directed.MakeLegrand/ L&T/ Havells.

Supply and fix MCB triple pole and neutral 415 volt 40 to 60 amps 10 KA complete all as specifed and directed. MakeLegrand/ L&T/ Havells.

Earthing complete with galvanized street earth plate electrode 600x600x6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for :-(a) Excavation and earth work or drilling hole for electrode in any type of soil (b) PCC pit in cement concrete 1:2:4 TYPE B-1 (.c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified.(e) 15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead.(f) Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion.

Disconnect and insulate electric supply wire and taking down carefully ceiling/exhaust/cabin/ wall fans of any make and sweep dismantling blades, check for repairs required Note : Repairs/ Replacement of spares shall be carried out under appropriate items complete all as specifed and directed.

Hanging only ceiling fans of any make and sweep connecting the complete with & including provision of copper conductor cord 3 core PVC insulated and sheathed from ceiling rose to fan connector and testing Making of MES No as directed and specified Note : The fan shall be fitted with new set of clamps rubber shackle split pins and top and bottom nut bolts etc.

Hanging only exhaust/cabin/wall fans of make and sweep connecting lug complete with and including provision of copper conductor cord three core PVC insulated and sheathed from ceiling rose to fan connector & testing. Making of MES No as directed and specified. Note : The fan shall be fitted with new set of washers nuts rubber packing etc.

Opening up of fan motor of ceiling/Exhaust/ wall/cabin fans cleaning starter rotor, cleaning of all parts greasing oiling of bush and bearing reassembling and testing for smooth functioning complete all as specifed and directed.

M&L for taken down burnt/damaged winding, cleaning stator and rotor including slots etc, rewinding with suitable gauge of super enameled copper insulated wire for ceiling fan 1200 mm sweep all as specified and as directed

All as per item No 49 above but ceiling fan 1400 mm sweep complete all as specifed and directed.

All as per item No 49 above but exhaust fan 300 mm sweep complete all as specifed and directed.

All as per item No 49 above but exhaust fan 450 mm sweep complete all as specifed and directed.

All as per item No 49 above but wall fan / cabin fan 400 mm sweep complete all as specifed and directed.

Supply and Fix bearing of replacement for Ceiling fan 1200mm sweep complete all as specifed and directed.

All as per item No 54 above but Ceiling fan 1400mm sweep. complete all as specifed and directed.

All as per item No 54 but 300mm sweep complete all as specifed and directed.

All as per item No 54 but 450mm sweep complete all as specifed and directed.

S & F gun metal bush for ceiling fan 1200mm sweep complete all as specifed and directed.

S & F gun metal bush for ceiling fan 1400mm sweep complete all as specifed and directed.

S & F for replacement of condenser AC 230 Volt 2.5 MFD complete all as specifed and directed.

S&F ceiling fan blades 1200mm sweep complete with nuts and bolts as per sample complete all as specifed and directed.

M&L for shaft work of ceiling fan of any make and sweep complete including filling metal and lathe machining complete all as specified and directed.

M & L Making of suitable size of hole for 225 to 400 mm sweep exhaust fan and including grouting bolts, cutting chasing and plastering, whitewashing etc and match with existing surface, all as specified and as directed

M&L for down rod for ceiling fan of any make land sweep made out of medium grade GI tubing 15mm dia duly painted with two coat of enamel paint and provision of holes for electric wire at top and bottom also arrangement for fitment of ceiling fans complete all as specifed and directed.

M&L MS work such as fan hook angle / FI clamp, MS pipe nuts, bolts, washers welding, bending cold or hot drilling holes for bolts in any shape and size etc including two coats of synthetic enamel paint cover a coat of red oxide primer complete all as specifed and directed.

Taking down carefully geyser/water heater of any Make type & size including disconnecting water connection plug water flow, for repairs and refixing the same to original position after repairs including decaling the inner tank and tubing and marking of MES No with synthetic enamel paint, black colour complete all as specified and as directed. Note:- (i) Spares required for replacement shall be measured and paid separately as Supply and Fix under respective items of this schedule. (ii) Quoted rates shall be deemed to be included for any GI Fitting, screwing, required during connecting/ disconnecting water supply.

Supply and Fix thermostat any type, suitable for geyser, ISI mark complete all as specified and as directed.

Supply and Fix PVC threaded tough rubber flexible pipe/ tubing of standard length 450 mm for geysers inlet/outlet connections complete all as specified and as directed.

Supply and Fix three pin plug top 15 amps complete all as specified and as directed. Make : Anchor /Standard/ Havells

Supply and Fix PVC insulated copper conductor PVC sheathed three core 2.50 sq mm flexible cable complete all as specified and as directed. Make : Polycab/ Finolex/ anchor

M&L for brazing the inner tank of geyser of any size and type after thorough check of leak complete all as specified and as directed.

Supply and Fix water heater element any type ( Cup/ Triangular /square) of capacity 1/1.5 KW complete all as specified and as directed.

Supply and Fix water heater element any type ( Cup/ Triangular /square) of capacity 2.0 KW complete all as specified and as directed. (MAP Accn Type)

Supply and Fix non-return valve made of brass 15mm dia ISI marked complete all as specified and as directed.

Supply and fix stop valve cast copper alloy, fancy type chrome plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15 mm dia pipe complete all as specified and as directed.

M&L for dusting / cleaning removing burrs on outer surface of geyser of any type complete for painting and spray painting with two coats of synthetic enamel paint of approved colour, for 50 ltrs capacity complete all as specified and as directed.

M&L for dusting / cleaning removing burrs on outer surface of geyser of any type complete for painting and spray painting with two coats of synthetic enamel paint of approved colour, for 25 ltrs capacity complete all as specified and as directed.

Taking down carefully Solar heater water tank of any Make, type & size , disconnecting water connection inlet and out let of tank and plug water flow, for repairs,descaling inner tank , replacement of heating elements thermostat, anti anode, refilling of distilled water as required including painting of water tank and refixing the same to original position after repairs. Marking of MES No all as specified and as directed.(Note:- Cost of heating element with thermostat, inlet outlet adaptor, air release valve, toughened glass will be paid in relevant items)

Taking down carefully Solar collector plate before T/D disconnecting water connection inlet and out let of collector plate plug water flow, descaling,with dilute acid , including replacement of unserviceable collector inlet and outlet flange with rubber gasket, refilling of distilled water as required and refixing the same to original position after repairs. all as specified and as directed

Supply and Fix Electric heater, Elements any type any size with thermostat 2 KW as per sample, all as specified and as directed

Supply and Fix Inlet adaptor complete all as specifed and directed.

Supply and Fix outlet adaptor complete all as specifed and directed.

Supply and Fix AIR release Valve complete all as specifed and directed.

Supply and Fix Toughened glass complete all as specifed and directed.

Supply and fix Delite hard water collector panel, suitable for 100 LPD complete all as specified and as directed Make:- sudarshan Saur,Kotak, Tata BP

Supply and fix Delite hard water tank, including heating element suitable for 100 LPD complete all as specified and as directed Make:- sudarshan Saur,Kotak, Tata BP

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.87,767.00]

VIJ ASSOCIATES

Vaidehi E Link

Bidder Name

Chinmaya Enteprises

Vaidehi E Link

VIJ ASSOCIATES