81201/E8 AUGMENTATION OF PERIMETER AND WATER FRONT SECURITY SURVEILLANCE SYSTEM AT NSRY (PBR) UNDER GE (P) NORTH, SRI VIJAYA PURAM.

Amount

SCH 'A' PART-I (BUILDING/ STRUCTURE WORK):- Lumpsum price worked out by the contractor for "BUILDING/ STRUCTURE WORK" as in Sch 'A' Part I representing above/ below the lump sum price of Rs 50,01,800.00 as inserted by MES for Sch 'A' Part I on Sl Page No. 18.

SCH 'A' PART-II (EXCAVATION, EARTHWORK & SITE CLEARANCE) :- Lumpsum price worked out by the contractor for "EXCAVATION. EARTHWORK & SITE CLEARANCE" as listed in Sch 'A' Part II representing above/ below the lump sum price of Rs 1,42,042.14 as inserted by MES for Sch 'A' Part II on Sl page No. 19

SCH 'A' PART-III A (INTERNAL ELECTRIFICATION) :- Lumpsum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Sch 'A' Part-IIIA representing above/ below the lump sum price of Rs 2,22,468.28 as inserted by MES for Sch 'A' Part-IIIA on Sl Page No. 23

SCH 'A' PART-IV A (INTERNAL WATER SUPLLY) :- Lumpsum price worked out by the contractor for "INTERNAL WATER SUPPLY" as listed in Sch 'A' Part IVA representing above/ below the lump sum price of Rs 10,220.78 as inserted by MES for Sch 'A' Part IVA on Sl Page No. 25

SCH 'A' PART-VA (EXTERNAL WATER SUPPLY) :- Lumpsum price worked out by contractor for "EXTERNAL WATER SUPPLY" as listed in Sch 'A' Part-VA representing above/ below the lump sum price of Rs 27,241.32 as inserted by MES for Sch 'A' Part-VA on Sl Page No. 26

SCH 'A' PART-VIA (EXTERNAL ELECTRIC SUPPLY) :- Lumpsum price worked out by contractor for "EXTERNAL ELECTRIC SUPPLY" as listed in Sch 'A' Part-VIA representing above/ below the lump sum price of Rs 2,76,692.80 as inserted by MES for Sch 'A' Part-VIA on Sl Page No. 27

SCH 'A' PART-VII (SEWAGE DISPOSAL) :- Lumpsum price worked out by contractor for "SEWAGE DISPOSAL" as listed in Sch 'A' Part-VII representing above/ below the lump sum price of Rs 1,10,359.49 as inserted by MES for Sch 'A' Part-VII on Sl Page No. 29

SCH 'A' PART-VIII (AREA DRAINAGE) :- Lumpsum price worked out by contractor for "AREA DRAINAGE" as listed in Sch 'A' Part-VIII representing above/ below the lump sum price of Rs 1,30,787.60 as inserted by MES for Sch 'A' Part-VIII on Sl Page No. 30

SCH 'A' PART-XA (FIRE ALARM SYSTEM) :- Lumpsum price worked out by contractor for "FIRE ALARM SYSTEM" as listed in Sch 'A' Part-XA representing above/ below the lump sum price of Rs 1,39,611.00 as inserted by MES for Sch 'A' Part-XA on Sl Page No. 31

SCH 'A' PART-XIA (COOLING APPLIANCE) :- Lumpsum price worked out by contractor for "COOLING APPLIANCE" as listed in Sch 'A' Part-XIA representing above/ below the lump sum price of Rs 43,410.39 as inserted by MES for Sch 'A' Part-XIA on Sl Page No. 32

SCH 'A' PART-XIIA (LIGHTENING PROTECTION) :- Lumpsum price worked out by contractor for "LIGHTENING PROTECTION" as listed in Sch 'A' Part-XIIA representing above/ below the lump sum price of Rs 20,441.54 as inserted by MES for Sch 'A' Part-XIIA on Sl Page No. 33

SCH 'A' PART-XIIIA (SHIFTING OF PIPE LINE) :- Lumpsum price worked out by contractor for "SHIFTING OF PIPE LINE" as listed in Sch 'A' Part-XIIIA representing above/ below the lump sum price of Rs 5,071.22 as inserted by MES for Sch 'A' Part-XIIIA on Sl Page No. 34

SCH 'A' PART-XIVA (PILE FOUNDATION) :- Lumpsum price worked out by contractor for "PILE FOUNDATION" as listed in Sch 'A' Part-XIVA representing above/ below the lump sum price of Rs 2,13,066.20 as inserted by MES for Sch 'A' Part-XIVA on Sl Page No. 35

SCH 'A' PART-IIIB (INTERNAL ELECTRIFICATION) (To be quoted by contractor)

S&F sheet metal (steel) encloser for distribution board (DB), 4 way, VTPN, vertical type, double door, IP-43, 415 Volts with 200 Amps rated bus bar of suitable size, common neutral link, factory fabricated suitable for MCCB as incomer complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick, buried less than 1.5 m below normal ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5 m below normal gound level, including provision of GI earth lead wire 4mm dia as earthing leads connected by means of bolts, nuts, check nuts and washers of galvaized iron or steel, with provision of 15mm bore GI pipe light grade for GI earth lead proctection, connected from plate electrode to main switch board and 20mm bore GI pipe medium grade for watering arrangement, MS Funnel, wire gauge and PCC (1:3:6) type C2 chamber, 50mm thich RCC (1:2:4) type B1, for earth pit cover with 6 Nos x 8mm dia high stregth deformed steel TMT bars on both ways, including necesary excavation in type of soil, returning, filling in, removal of surplus soil to a distance n'exc 50mm, provsion of charcoal and salt as shown in electrical plate No. 3 of shcedule Part-I 2009 including testing on completion of earthing complete all as specified and directed. Note: Cost of GI earth lead wire and GI protection pipe upto 7.5 m length shall be deemed to be included in the rate quoted for this item.

SCH 'A' PART-IVB (INTERNAL WATER SUPPLY) (To be quoted by contractor)

S&F 15mm bore CP brass angular stop cock with flange plate screwed for iron pipe of ferrule and fixed complete all as specifeid and directed.

S&F two way bib tap, cast copper alloy, chromium plated with capstan head, fancy type, screwed down, screwed for iron pipe fittings or for brass ferrule and fixed suitable for PP-R pipe of 20mm outer dia including necessary reducer joint complete all as specified and directed.

S&F PVC flexible waste pipe of size 32mm dia and 750mm long for WHB/ Urinal complete all as specified and directed.

SCH 'A' PART-VB (EXTERNAL WATER SUPPLY) (To be Quoted by contractor)

M&L for making conection of distribution branch by cutting of the existing GI pipe of 50 mm bore and fixing GI TEE 50x50x50 mm with and including cutting and making joint, necessary earth work and other connected work complete all as specified and directed.

M&L for masonry valve chamber of internal size 300mm x 300mm x 300mm for 40mm dia gate valve including excavation and earth work in any type of soil and 100 mm thick PCC (1:4:8) type D2 in foundation, brick work in CM (1:6), plastering internal surface 15mm thick in CM (1:4), PCC (1:3:6) type C1 as in coping, 30x30x6mm angel iron with 6 mm thick MS plate cover complete with locking arrangement painting steel and iron surface with two coat of synthetic enamal paint over a coat of red oxide primer complete all as specified and directed.

SCH 'A' PART-VIB (EXTERNAL ELECTRIC SUPPLY) (To be quoted by contractor)

S&F DWC (Double Wall Corrugated) HDPE pipe polyethlene confirming to IS 16205 Part -24 including coupler with smooth internal and profiled external surface, laid in tranches/ ducts for cable protection complete all as specified and directed for following size :-

77mm (outer dia) & 63mm (inner dia).

50mm (outer dia) & 38mm (inner dia).

S&F feeder pillar box, cubical type, dust and vermin proof made out of 3.15 mm thick CRCA metal sheet having 01 No MCCB 4 pole, 415V, 125 Amps breaking capacity 25 KA inluding fixing/ grouting with angle iron 50x50x5 mm, panel should be painted with two coat of synthetic enamel paint and one coat of red oxide primer with and including necessary earth work & PCC (1:2:4) type B1 for grouting work complete all as specified and directed.

Supply, installation, testing and commissioning outdoor LT Distribution Panel suitable for 3 phase, 4 wire, 415 volts 50 Hz supply system with suitable size and powder coating provided with suitable to make it dust/vermin proof. The panel should be CPRI approved shall be made with 3.15mm thick CRCA sheet for outer shell and inner shell made out of 2mm thick CRCA sheet, double door with front and back openable with locking arrangement, provision of threaded earthing stud at bottom, inner shell completely vermin proof and to accommodate incoming / outgoing MCCB, MCBs and TPN aluminium bus bar and extension links of rating not less than 1.5 times the rated capacity of the respective incomer MCCBs. The TPN busbar and extensions link shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on epoxy regin insulator. All control wires shall be with 1.5 sqmm multistandad copper conductor wire and shall be properly bunched, tied ferruled for proper identification and crimped with adequate size of lugs. The panel shall be mounted on 50x50x5mm angle iron stand of height 45cm above ground level and 45cm embedded in ground, computer cut self adhesive vinyl danger notice plate having conventional symbol of bone and skull be provided. The panel shall be consist of the following accessories:-

(a) On load change over switch 4 Pole, 125 Amp, 50 Hz, 415 V - 01 No. (Incoming) (b) MCCB 4 Pole, 125 Amp, 50 Hz 415 V with rupturing capacity 25 KA, Ics=100% Icu and adjustable thermal setting and fixed magnetic setting - 01 No (Incoming) (c) MCCB 4 Pole, 100 Amp, 50 Hz 415 V with rupturing capacity 16 KA, Ics=100% Icu and adjustable thermal setting and fixed magnetic setting - 01 Nos (d) MCCB 4 Pole 63 Amp 50 Hz 415 V with rupturing capacity 16 KA, Ics=100% Icu and adjustable thermal setting and fixed magnetic setting - 02 Nos (outgoing) (e) MCB 4 Pole, 32 Amps, 50 Hz 415 V with rupturing capacity 10 KA, 'C' curve - 01 Nos (outgoing) (f) Digital Multifunction meter - 01 No (g) Indicating lamps R,Y,B - 01 set

M&L for Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level, with and including GI earth strip 32x6 mm as earthing lead connected by means of bolts, nuts, check nuts and washers of galvanized iron or steel, 40 mm bore GI pipe light grade for GI strip protection connected from earth plate electrode to main switch board, provision of 20mm bore GI pipe medium grade for watering arrangement, MS funnel, wire gauge and PCC (1:3:6) type C2 chamber, 50mm thick RCC (1:2:4) type B1 for earth pit cover with 6 Nos x 8mm dia high strength deformed steel TMT bars on both ways, including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to a distance n'exc 50m, provision of charcoal and salt as shown in electrical plate No.3 of Schedule Part-I 2009 including testing on completion eathing complete all as specified and directed Note: Cost of GI earth strip and GI protection pipe upto 7.5 m length shall be deemed to be included in the rate quoted for this item.

M&L for cable route indicator consisting of cast iron round shape 12mm thick inscription casting as LT cable 1100 Volts grade and fixed with hot dipped GI angle iron of size 40 x40 x6 mm thick 0.8 mtr long with GI nut bolts, embedded in route of cable with PCC (1:3:6) type C2 complete all as specified and directed.

SCH 'A' PART-IX (AIR CONDITIONING) (To be quoted by contractor)

S&F including installation, testing and commissioning of hi wall split AC units, inverter type, indoor/outdoor unit with copper condenser coil and all accessories ie copper tubing, insulation, drain pipe etc complete with cordless remote unit and inbuilt air ioniser and plasma filter for better filter for air quality with 5 star rating and EER 3.2 with and including mounting bracket for outdoor unit, heavy duty factory made with anchor fastener, nuts, bolts for fixing on wall as the specified location (suitable height for maintenance) and connecting the indoor-outdoor unit by means of copper tubing including flaring, bending, brazing work as site and testing complete with satisfactory cooling results complete all as specified and directed for following capacity :- Note : The costof copper tubing as required for suction and discharge with insulation and clading, flexible drain pipe as required deemed included in quoted rate.

S&F voltage stabilizer for automatic operation, single phase, naturally air cooled, indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% complete all as specified and directed of following capacity :-

SCH 'A' PART-XB (FIRE ALARM SYSTEM) (To be quoted by contractor)

S&F including laying and testing of fire alarm cable (red colour) of size 1.5 Sqmm, 2 core confirming to BS 7629-1 BS EN 50200 consisting of plain annealed copper conductor to BS EN 60228 class 2 with primary and secondary insulation laid in PVC conduit of size not less than 20mm dia complete all as specified and directed.

SCH 'A' PART-XIB (COOLING APPLIANCE) (To be quoted by contractor)

S&F voltage stabilizer of 1 KVA for automatic operation, single phase, naturally air cooled, indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% complete all as specified and directed.

SCH 'A' PART-XIIB (LIGHTENING PROTECTION) (To be quoted by contractor)

M&L for Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level, with and including GI earth strip 32x6 mm as earthing lead connected by means of bolts, nuts, check nuts and washers of galvanized iron or steel, 40 mm bore GI pipe light grade for GI strip protection connected from earth plate electrode to main switch board, provision of 20mm bore GI pipe medium grade for watering arrangement, MS funnel, wire gauge and PCC (1:3:6) type C2 chamber, 50mm thick RCC (1:2:4) type B1 for earth pit cover with 6 Nos x 8mm dia high strength deformed steel TMT bars on both ways, including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to a distance n'exc 50m, provision of charcoal and salt as shown in electrical plate No.3 of Schedule Part-I 2009 including testing on completion eathing complete all as specified and directed Note: Cost of GI earth strip and GI protection pipe upto 7.5 m length shall be deemed to be included in the rate quoted for this item. GI strip and GI protection pipe beyond 7.5 m shall be measured and paid separately.

SCH 'A' PART-XIIIB (SHIFTING OF PIPE LINE) (To be quoted by contractor)

M&L for 150mm bore ductile iron (DI) pipes with spigot and socket end, centrifugally cast, Class K7, in any length with and including specials and making joints, laid in trenches complete all as specified and directed. Note : The cost of joint (tyton/ rubber/ lead joint as per required) of DI pipes deemed included in quoted rates.

SCH 'A' PART-XIVB (PILE FOUNDATION) (To be quoted by contractor)

M&L for drilling/ boring through following type of soil up to the depth as directed / indicated for 450mm outer dia bored cast-in-situ, vertical piles duly stabilising the sides by drilling fluids (Auger boring /DMC boring method) the method of boring will be approved by GE based on site condition before execution of work and disposal of drilled/bored material to a distance exc 50m and n'exc 100m complete all as specified and as shown on drawings :-

Any type soil (soft/loose soil or hard/dence soil).

Soft/ disintegrated rock.

Hard rock.

M&L for carrying out/ conducting testing of pile for intial load test all as per IS -2911 Part - IV-2013 for 45 Mtrs (2.5 times of design load) on test pile of 450mm bore including bringing at site all testing equipment making arrangement for testing and removal of the same after completion and recording the test results and preparing the test sheets complete all as specified and directed.

M&L for carrying out/ conducting testing of pile for routine load test all as per IS-2911 Part -IV-2013 for 33.40 Mt (1.5 times of design load) on working pile of 450 mm bore including bringng at site all testing equipments making arrangement for testing and removal of the same after completion and recording all as specified and directed.

M&L for carrying non-destructive integrity test on piles as per IS-2911 Part IV-2013 on test pile 450mm bore by using pile integrity tester complete as specified as directed.

M&L for CRS TMT steel bars Fe-500D 10mm dia and over as in reinforcement, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips and providing additional stiffener bars as shown in drawings complete all as specified and directed.

M&L for CRS TMT steel bars Fe-500D, 6mm to 8mm dia as in reinforcement, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips and providing additional stiffener bars as shown in drawings complete all as specified and directed.

Subtotal

ANANYA ENTERPRISES (BID ID -3462331)

P NAIDU (BID ID -3464872)

City Constructie Pvt Ltd (BID ID -3463196)