Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.4 LAccepted-AOC N A | NA | NA | 121004 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹34.1 L+₹74,652.48 (2.24%)Rejected-Finance RAMA PARK A 121 BLOCK A UTTAM NAGAR WEST DELHI DELHI 110059 | DELHI | WEST DELHI | DELHI | 110059 | L2 | Rejected-Finance BEING OTHER THAN LOWEST | |
| 3 | L3₹35.3 L+₹1.9 L (5.63%)Rejected-Finance PLOT NO 17 GF PRATAP NAGAR NEW DELHI 110064 | WEST | DELHI | 110064 | L3 | Rejected-Finance BEING OTHER THAN LOWEST | |
| 4 | L4₹35.8 L+₹2.4 L (7.07%)Rejected-Finance | L4 | Rejected-Finance BEING OTHER THAN LOWEST | |
| 5 | L5₹35.8 L+₹2.4 L (7.09%)Rejected-Finance N A | FARIDABAD | HARYANA | 121004 | L5 | Rejected-Finance BEING OTHER THAN LOWEST |
Tender Value
₹41.2 L
EMD Value
₹82,460
Closing Date
18 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
PROVN OF ROOM FOR SINGLE OFFRS ACCN AT CENTRAL ASC OFFRS MESS UNDER GE (EAST) DELHI CANTT-10
2024_MES_643779_1
GE/DE-125/2023-24
Open Tender
Civil Works
Item Rate
120 days
GE (EAST) DELHI CANTT-10
Class D Cat a (i)
8 documents required · 8 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹82,460
Yes
16 May 2024
23 Feb 2024
21 Mar 2024
23 Feb 2024
18 Mar 2024
11 Mar 2024
Amount
Surface excavation not exc 30 cm deep and ave 15 cm deep and getting out in soft/loose soil complete all as specified.
M&L for Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation etc or for shafts, wells, cesspits etc not exc 10 sqm on plan and getting out in soft/ loose soil complete all as specified
M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete.
M&L for Removing surplus excavated soil to a distance n-exc 50 mtr & desposting where directed at a level n-exc 1.5 mtr above the starting point complete
M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete.
M&L for reinforced cement concrete M-25 (20 mm graded aggregate) design mix concrete as in foundations, including rafts footings, foundation beams, plinth beams and mass concrete complete.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter
M&L for reinforced cement concrete M-25 (20 mm graded aggregate) design mix concrete as in columns, pillars, posts and struts etc complete.
M&L for Form work to flat sided of pillars, post,struts columns,square,rectangle or polygonal etc. rough finished surfaces complete all as specified & directed
M&L for Use and waste of form work to sides and soffits of floor or roof beams, beam haunching, girders, bressumers, lintel beams/lintel band , cantilever and similar work rough finished surface of concrete complete all as specified and directed.
M&L for reinforced cement concrete M-25 (20 mm graded aggregate) design mix concrete as in Beams, cantilevers, bressummers, lintels over 1.5m span
M&L for reinforced cement concrete M-25 (20 mm graded aggregate) design mix concrete as in as in slabs (roof) supported on walls, beams and columns , landings, and in shelves and the like complete all as specified and directed.
M&L for Use & waste for form work to soffits of suspended slab such as roof slab, floor slab , landing and similar work; not exc 200 mm thick horizontal or sloping, finished rough and even complete all as specified and directed.
M&L for Form work to edges of concrete flat,treads,breaks in floor window cills concerte railing,opening in conmcrete walls, floor and roof and similar work exc. 10cm but not exc. 20cm wide complete as all specified & directed
M&L for reinforced cement concrete M-25 (20 mm graded aggregate) design mix concrete as in Chajjas and the like complete all as specified and directed.
M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges
M&L for 40mm thick DPC in cement concrete(1:2:4) B-type(12.5mm graded aggragate) to horizontal & vertical surface including necessary form work and complete all as specified & directed.
M&L for Polythen film 50mm thick micron laid with a coat of bitumin primer @0.30to 0.50 Kg per Sqm on DPC complete all as specified and directed.
M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean radius and built in CM 1:4 complete all as specified and directed.
M&L for 15 mm thick rendering in CM 1:6 on stone masonry surfaces or surfaces other than fair faces of brick work, finished fair and even without using extra cement complete all as specified and directed.
M&L for 20 mm thick rendering consisting of two layers, first layer 10 mm thick in CM 1:4 and top layer 10 mm thick in CM 1:4 mixed with WPC on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and directed. (Note: WPC shall be measured & paid separately under this BoQ as supply only).
M&L 5mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces and finished the surface even and fair without using extra cement in ceiling complete all as specified.
S&F MS TMT steel bars 5 mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.
S&F MS TMT steel bars 10 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.
M&L for prepration of new plastered surfaces of wall and applying of Birla/JK white wall putty approx 2 mm thick as per manufacturer's instructions on existing prepared surface and make the surface smooth by rubbing with sand papers etc and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.
M&L for preparing new plastered surfaces and applying of Birla/JK white wall care putty approx 2 mm thick as per manufacturer's instructions on existing prepared surface and make the surface smooth by rubbing with sand papers etc and applying two coats of Plastic emulsion paint over a coat of primer of walls complete all as specified and directed.
M&L for preparing new plastered surfaces ceiling and applying of Birla/JK white wall care putty approx 2 mm thick on ceiling as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers etc and applying two coats of oil emulsion distemper over a coat of primer on ceiling complete all as specified and directed.
M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in floor sub base complete all as specified and directed.
M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floor etc with epoxy grouting or set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:6) complete all as specified
M&L for Vetrified ceramic tiles Double charged (dark shade) 10mm thick (square/rectangular) area of each tile exc 0.42 sqm but not exceeding 1.00 sqm, in floors etc. with epoxy grouting or set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:6) complete all as specified
All same as per srl item No. 30 here-in-before but on vertical surfaces such as in skirting / dados with 10 mm thick CM 1:4 rendering.
M&L for 1st/Premium quality glazed ceramic digital coloured tiles with highlighter concept in matching pattern of size exc 0.18 sqm but n.exc 0.38 sqm 7 to 8 mm thick as in vertical surfaces such as skirtings, dados etc set & with epoxy grouting or jointed in neat cement slurry & pointed with white or coloured cement to match the shade of tiles over and incl 10 mm thick backing coat in CM (1:4) complete all as specified and directed.
S&F in repair for 15 mm dia fancy type CP bib taps half turn with wall flange with screwed down, screwed for iron pipe or for brass ferrule including cap and fixed complete all as specified and as directed by Engineer-in-Charge. (Make: Jaquar/Marc/Kohler)
S&F in repair 15 mm bore fancy type angle valves half turn chromium plated fancy type with wall flange screwed down high pressure screwed both ends for iron pipes or for unions complete all as specified and as directed by Engineer-in-Charge (Make-Hindware/Jaquar Cat Part No. ORM-10053/MARC
S&F 15 mm bore brass CP single lever Basin mixture for Mixing Hot and Cold water fixed as per manufacture’s manual, with long shunk and cup washers, screwed both ends for iron pipes or for unions complete all as specified and directed Make : Jaquar Cat Part No. OPL-15011B/Cera Cat No F3001461/ Somany Cat No 220912/Hindware F-330014CP complete all as specified and directed.
S&F in repair Vanity box of HDHRM of size 580x450x680mm with mirror cabinet of size 500x700mm with table top basin complete all as specified and as directed. (Make: Amara in Parryware Main Cabinet C896146 Mirror Cabinet C896C46 or equivalent in Kohler or Marc).
S&F in repairs 32mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed.
S&F 15 mm bore 2 way angel valve with wall flange complete all as specified & directed. (Make: Jaquar/Marc/Kohler)
S & F CP Toilet Paper holder with flap guard complete all as specified and directed. (Make: Jaquar/Marc/Kohler)
S&F CP Brass soap dish complete all as specified & directed. (Make: Jaquar/Marc/Kohler)
S & F Corner Glass Shelf 225 x 225 mm radius consisting of 5.5mm thick sheet glass with chromium plated brass brackets with two No CP Railing in each set complete all as specified and directed. (Make: ACN-CHR-1173 of Jaquar/Marc/Kohler)
S & F CP Health Faucet with 1.00 Mtr long CP Flexible pipe as per approved sample complete all as specified and directed Make Hindware Cart Part No F160001/Marc Cat No MAC-3052 Cera Cart No F8030103.
S&F Vitreous china wash down water closet pan wall hung WC 2049 EWC Wall hung Ext. 'P" 655 x 390 x 745 mm cistern 2129 , shoft closed seat cover2356 and 2238 twin flush fitting of Cera , hindware italian collection, jaquar or other equivelent , including flushing cistern. seat cover and fixed with brass screw complete all as specified and as directed.
S&F CP towel rail 600mm long 20mm thickness complete all as specified and as directed by Engineer-in-Charge complete all as specified and directed. (Make: Jaquar/Marc/Kohler)
S&F 450 mm long PVC connection with stainless steel armed 15 mm bore with nuts complete all as specified and as directed by Engineer-in-Charge complete all as specified and directed.
M&L earth filling under floor/ floor finishes including spreading and levelling in layers not exc 25 cm thick for well ramming including watering as required complete all as specified and directed.
M&L for hard core of broken stone or boulder of gauge not exc 63mm, deposited, spread and level in layers not exc 15cm thick watered and rammed to a true surface complete all as specified and directed.
M&L for 75 mm thick cement concrete 1:3:6 type E-2 (using 40 mm graded stone aggregate) as in plinth protection laid to slope of 1 in 12 and finishing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges rough or rounding or chamfering of exposed edges where directed and providing 6 mm thick joints through the thickness of plinth protection duly filled with mastic filling of one part of hot bitumen 85/25 grade and three parts of fine sand (all by weight) complete.
Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
M&L Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing; frame work for water tanks and similar work conforming to Fe 290 Gde-E-165 all as specified .
S&F in 7-8 mm thick slected quality toughned glass cut to size and shape including chamfering of edges cutting holes/ slotes for fixing in doors/ windows with all necessary fixing arrangement complete all as specified and directed. (Make - Modi, Saint Gobain or equivalent).
S&F in 5 - 6 mm thick slected quality toughned glass obsecured or frosted cut to size and shape including chamfering of edges cutting holes/ slotes for fixing in doors/ windows with all necessary fixing arrangement complete all as specified and directed. (Make - Modi, Saint Gobain or equivalent).
M&L ATT for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surfacecomplete all as specified and directed.
M&L ATT for treating the soil under plinth protection at the rate of 5 litres of emulsion per sqm of surface area complete all as specified and directed
M&L ATT for treating the soil alonwith external perimeter of building @ 2.25 ltr of emulsion per mtr of the perimeter wall complete all as specified and directed.
Supply and fixing steel water tubing `medium grade’ galvanized 20 mm bore with all fittings and fixed complete to walls and joints fixed with adhesive complete all as specified & directed.
Supply and fixing steel water tubing `medium grade’ galvanized 15 mm bore with all fittings and fixed complete to walls and joints fixed with adhesive complete all as specified & directed.
Supply only Liquid water proofing compound complete all as specified and directed.
PVC (SWR) floor trap, plain with grating including jointing with solvent cement all specified & directed 75mm bore complete all as specified and directed.
PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to wall 110 mm bore complete all as specified and directed.
PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to wall 75 mm bore complete all as specified and directed.
PVC (SWR) reducers all specified & directed 110 mm dia complete all as specified and directed.
PVC (SWR) vent cowl all specified & directed 110 mm dia complete all as specified and directed.
110mm PVC (SWR) WC connector bent type all as specified & directed
PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement all as specified & directed
S&F rotantional moulded polythylene water storage tanks 1000 ltr capacity three layer (cylindrical vertical with closed top) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore omplete all as specified and directed. Make Sintex or equivelent.
M & L for providing and applying smart care Dampproof, a fidre reinforced elastometric liquid water prrofing membrane formulated with reinforced acrylic fibres having Sun Reflective Index (SRI) of 105 on horizontal/ vertical surfaces of roof/ wall/ chajjas in multiple costs @2.0 litre/ sqm. Primary coat is self-priming coat of elastomericwaterproofing liquid (Dilition with water in the ratio of 3:1, damp proof : Water) and other coat to be applied undiluted. The coating needs to be reinforced with 40GSM Geotextile, to sandwiched between 2nd &3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Cgarge. Make : SmartCare Damp Proof of Asian or equivelent in Berger/ Nerolac/ STP/FOSROC only. Notes: (1) The work shall be executed through authorised appplicatot of manufacturer only. (2) Authorised Applicator shall be approved by GE befor starting the work. (3) All materials shall be produced directly from manufacturer. The purchase voucher shall be produced to the Engineer-in-Cgarge for his verification of material. Engineer-in-Cgarge shall deface the original purchage vouchers. (4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water Proofing treatment for a period of Ten (10) years in fevour of GE (East). A sum equivelent to 2.5% ( Two point five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor's duues as security deposite. The contractor may, however, furnish a fixed deposite receipt in lieu from a Schedule bank pledged in fevour of Garrison Engineer.
M&L for rendering 15 mm thick in cement mortor 1:4 over PCC bedding with water Proofing compound and finishing the surface even and fair without using extra cement complete all as specified directed. (Note: WPC shall be measured & paid separately under this BoQ as supply only).
M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.
M&L for Type C1 20mm graded 1:3:6 in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, all as specified and directed.
M&L for PCC (1:2:4) type B-2, (40MM GRADED AGGRAGATE) in surface channel and drain complete.
M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specifed and dircted .
M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab over and including15mm thick screed bed in cement mortar (1:4) including rounding to edge of Granite as per required complete all as specified and as directed.
Supply and fabrication & fixing of Modular Kitchen Cupboards, Almirah etc made out of 15-18 mm thick HDHMR board (action tesa or equivalent) with front face covered with laminate of high gloss from merino and the edges via 1.3 mm thick edge bending tape (colour of glossy laminates as approved by GE) Colour of laminates , design & paterns of partations/ etc as approved by GE) including all accessories of fittings - Auto/soft closing hinges for shutters, C/J gola profile for handel less and Telescopic Channel etc as required and as directed including frame work etc complete all as specified. (Note: Front face will be measured for payment purpose)
S&F Decorative type cornies not less then 75mm wide suitable width on wall and ceiling edges/ corners with plaster of paris sheets fixed with machine screws including preparation of surface and applying one coat primer and two coat of plastic emulsion paint complete all as specified and as approved by Engr-in-Charge.
S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm center to center/ Intermediate channel 0.9 mm thick having to equal flanes of 15 mm each and web of 45 mm suspended from soffit at approx x 900mm center to center with GI cleat and steel expension fastners with and including ceiling section ( not exc 1.2m length ) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50 mm fixed to the intermediate channel at 457 mm center to center including Hangers 6mm dia GI up to 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI Flat 40x3mm size 60mm long and expansion hold fastners 12.50 dia. 40 mm long complete all as specified and as directed.
S&F Providing and fixing 10 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class hard wood fillets, or metal frame and work with GI wire mesh( fillet, Metal frame work and GI Wire mesh paid seprately) including sunk or raised mouloding complete all as specified and as directed.
M&L Providing and fixing 10 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class hard wood fillets, or metal frame and work with GI wire mesh (fillet, Metal frame work and GI Wire mesh paid seprately), complete all as specified and as directed.
S&F Drapery rod 25mm dia aluminium, powder coated teak wood texture finish 1 mm thick, with end bulbs, brackets complete all as specified and directed.
S&F CP brass shower rose 240x240mm fancy type with chromium plated arm fixed to 15mm pipe of revolving type complete all as specified and directed. (Make : Jaquar Model No: OHS-CHR-1629 or equivalent in Marc/Kohler)
S&F wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe connecting legs and wall fittings and fixtures, flexible tube 8mm dia and 1.50m long with nuts, hand shower 105mm dia round shape single flow with air effective (ABS body and Face plate chromium plated) with rubit cleaning system complete all as spd. (Make Jaquar Cat No : FUS-29281 or equivalent in Kohlar/ Marc)
S & F Stop valves 20mm Dia, but fancy type, chromium plated with long shank and cup chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.
M&L for preparation of new plastered surface of wall and applying two coat of Designer wall paper roll /Texture paint (Approved Design and colour) over a coat of priming coat including 2 mm thick wall care putty on newly plastered surface complete.
Excavation in trenches n.exc 1.5M wide exc 1.5M depth and n. exc 3.00 depth and n.exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified and as directed.
Excavation over area and getting out in soft/loose soil complete all as specified and as directed.
Excavation over area exc 1.50 mtr and n. exc 3.00 Mtr depth and getting out in soft/loose soil complete all as specified and as directed.
M & L for PCC 1:3:6 type C-2 ( Nominal mix) using 40 mm graded stone aggregate as in foundation filling, mass concrete and similar work complete all as specifed and as directed.
M&L for Brickwork with sub-class `B' bricks in one brick thick honeycomb walling built in CM 1:4 complete all as specified and as directed.
M&L for Reinforced cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in slabs supported on wall , beams and columns in floor, roofs, landings, canopies etc complete all as spd & directed
All as per item No. 24 here-in-before but 6 to 8mm dia.
M&L for Precast RCC 1:2:4 type B-1 (using 20 mm graded stone agg) as in manhole's cover slab etc placed in position including necessary form work and set in cement mortar 1:4 complete all as specifed and as directed.
M&L for Rendering 15mm thick, in cement mortar 1:4 on brick work or concrete surfaces and finished even and fair without using extra cement with water froofing compound complete all as specified and as directed. (Note: WPC shall be measured & paid separately under this BoQ as supply only).
M&L Concrete bed to drain pipes in PCC 1:4:8 type D - 2 using 40mm grade stone aggregate to drain pipes including forming cradels for 150 mm dia bore pipe complete allas specified and directed.
S&F reinforced concrete pipes class NP2 150mm bore laid and jointed complete with collars complete all as specified.
M&L for Plain cement concrete 1:2:4 type B- 1 (using 20 mm graded stone agg) as in as in haunching benching and PCC coping including necessary form work and set in cement mortar 1:4 complete all as specifed and as directed.
M&L for Cutting into existing manholes on connection of new drain pipe for 150mm dia making good to pipe and rendering cutting out existing benching for and forming branch channel half round or 3/4 section in cement concrete 1:2:4 mix type B-1 smooth finish and reforming benching as reqd.
M&L for Rendering 15mm thick in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified.
M & L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base 75mm thick complete all as specified and as directed.
M&L for 100 mm thick PCC (1:4:8) type D2 (using 40mm stone aggregate) as in sub base of floor complete all as specified and directed.
S&F Machine pressed precast concrete interlocking glazed paver block with grey cement and pigment of any shape and size conforming to IS 15658 - 2006 of 60 mm thickness and M - 35 grade over and including 50 mm sand cushion including packing joints etc complete all as specified and directed.
M&L 25 mm thick factory made coloured interlocking desiner polished floor tiles (ultra pattern) of grade M - 35, of shape and size as directed laid over and including 20 mm thick screed bed in CM 1:6 complete all as specified and as directed.
M&L for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked through and in and including PVC concealed conduit ISI marked of 20mm dia with all fitting including FRLS, PVC insulated unsheathed 1.5 Sqmm multistranded copper earth wire, connecting to common earth dolly with and incl Metal flush box and cover plate with frame for modular switches/sockets/fan regulator etc with of suitable sizes including cutting chases and making good disturbed surface in cement mortar 1:3 to match with existing finish as original complete all as directed for the following:-
All as per item No 105 here-in-before but one socket outlet point 5 amps on the same board.
All as per item No 105 here-in-before but one socket outet point 5 amps on the independent board.
All as per item No 105 here-in-before but with 2.5 Sqmm cable for independent point.
S&F modular switch flush type, 6 amps one way,SP,230 volts AC all as directed.
S&F modular socket outlet 6 amps 5 pin 2 module all as directed.
S&F modular socket outlet 6 & 16 amps 6 pin multipurpose combined 2 module all as directed.
S&F modular switch flush type, 16 amps one way,SP,230 volts AC all as directed.
S&F modular Step Fan regulator, 120 watts single / double module all as directed.
S & F of Ceiling rose, 3 terminal, Polycabonate, isulated body all as specified and directed.
Material and labour for Sub main wiring with 2 run of 4 Sqmm (nominal area) FR, PVC insulated, unsheathed and multi stranded copper conductor cable ISI marked, in PVC concealed conduit medium grade with all fittings and 1 run of 4 Sqmm (nominal area) FR, PVC insulated, unsheathed and multi stranded copper conductor cable unsheathed and multistranded copper conductor cable as earth wire including cutting chases and making good disturbed surface in cement mortar 1:3 to match with existing finish as original, connected with thimble from main DB to AC/Geyser point complete all as specified.(Note: 2 Run of main wire and 1 run of earth wire shall be measured one unit i.e. 1 RM).
S&F LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 20 Watt cool/warm white as per site requirement complete all as specified and as directed.
S&F LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound 10 Watt , cool/warm white as per site requirement complete all as specified and as directed.
Supply and fixing of LED ceiling light fitting 15 watt, in round shape, surface/recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed.
Supply and fixing of wall light fitting fancy type with and incl 9 watt LED lamp complete all as directed. (Make: PHILIPS GLINT SINGLE HEAD 9 WATT or equivalent in Havells/Bajaj/Wipro).
S&F of LED Bed Side Flexible Arm lamp 7 W complete all as specified and directed. (Make: PHILIPS METAL 31437 or equivalent in Havells/Bajaj/Wipro).
S&F of energy efficicent LED fittings 45W LED 6K suitable for builing security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as specified and as directed.
S & F of street light bracket incl clamp, nut and anchor bolt etc make to shape for street light fitting made out of GI pipe light grade 25 mm bore 1.0 mtr long on bend to shape the top of wall of existing building complete all as specified and directed.
S&F BLDC (Brushless Direct Current) Ceiling Fan, 1200 mm suitable for regulator, not less than 350 RPM, not less than Air delivery 210 cum/minute, voltage 220V,having full copper motor winding & ribbed 3 Nos A/M blades.. The fan shall have BEE 5 star rating and making necessary electric connection of suitable PVC copper wire from ceiling rose to ceiling fan complete all as specified and directed.
S&F of wall mounted fan 400mm sweep, Copper winding, 240 Volts. 50 Hz and depositing the old u/s to mes store yard, complete all as specified and as directed.
S&F of Ventilating fan 200 mm sweep plastic body type including self cousing louver and making all electric connections, complete all as specified and as directed.
S & F of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as specified and directed.
S & F of MCB C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA of capacity 6 to 16amps complete all as specified and directed.
S & F of Isolator suitable for 240 volts AC supply, SPN of capacity 32/40 Amps complete all as specified and directed.
S&F Geyser 25 litre capacity vertical type with steel tank and glass inner linen , 5 star rating complete including fastners (4No.) for hanging and CP and PVC connection for inlet and outlet upto stop cock, complete all as specifed and as directed.
Supply and fixing of Modular AC Socket with 25 Amps SP mini MCB, 230 Volts, 50Hz. In 4 module sheet metal enclosure complete all as specified and as directed.
Supply and fixing of high pressure booster pump pressure tank, coupled with electric motor of capacity 0.18 HP, discharge min 32 LPM,230 volts, single phase, 50 Hz incl. connecting accessories of GI i.e bend, nipple, socket, tee of requisite size etc incl cutting of existing pipe complete all as directed.
S&F of Modular TV socket 01 Module size socket as per site requirement complete all as directed by the Engr-In-Charge.
M&L of Modular Telephone socket Jack 01 Module size (RJ 11 Socket Jack) complete with modular sheet as per site requirement complete all as directed by the Engr-In-Charge.
M&L for TV Wiring with Co axial RG-6 heavy duty PVC insulated, PVC sheathed cable having single strand of 0.7 mm dia taped suitable for telephone wiring and making all necessary connections from terminal box to TV socket, drawn in and including separate concealed PVC conduit 20mm dia medium grade with all fittings including cuttings chases & making good with CM 1:3 to match with existing surface complete all as directed.
M&L of telephone Wiring with twin core PVC insulated, PVC sheathed cable suitable for telephone wiring and making all necessary connections from terminal box to telephone socket, drawn in and including separate concealed PVC conduit 20mm dia medium grade with all fittings including cuttings chases & making good with CM 1:3 to match with existing complete all as specified and directed.
S & F ABS Plastic Automatic Hand Dryer (white standarad ) Power-1200W, Speed-1200 R/M ,Voltage-220V ,IPX1,complete all as specified and directed.
Material and labour for earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs below ground level) with top edge of plate not less than 1.5 mtr deep below normal ground level, connected to galvinised earth wire 4 mm dia by means of nuts, bolts and check nuts & washer of galvanised steel or iron all as shown in electical plate No 3 connected to earth testing point all as specified testing on completion including provision of 15mm bore protection pipe light grade and watering pipe 20mm bore medium grade, excavation & earth work, PCC pit with cover, charocol, salt, funnel, wiremesh etc all as specified and as directed. (Note :- Cost of protection pipe & GI wire upto 7.5mtr shall be deemed to be included in the unit rate quoted)
S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 2 Core.
M&L for sand cushioning to under ground cable provided with layers of snad(8 cms deep before laying the cable and 15 cms deep after laying) complete allas specified and directed at site by Engineer-in-Charge.
Supply and laying burnt bricks class - B for protection of cable complete all asspecified and directed at site.
S & F of Galvanised steel tubing light grade of size 40mm bore with all fittings for road crossing passing cable complete all as specified and directed.
Cutting of Gi Pipe Line 50mm dia medium grade for alteratics/ additions of tee complete all as sepecified and as directed.
M & L for Tubes, 'medium grade bore dia (25mm) galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
M & L for Tubes, 'medium grade bore dia (20mm) galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
M & L for Gun-metal, globe or gate valves bore dia of (20mm) , with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
HANUMAN BUILDERS
M/s Durga Traders
M/S GEETANJALI ENTERPRISES
friends associeates
Vishal Traders
HIND CONSTRUCTIONS
PG CONSTRUCTION AND COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .