COMPREHENSIVE MAINT AND REPAIR AT OFFRS MD ACCN AT VIKRAM VIHAR AND ANUJ VIHAR UNDER GE (SOUTH) DELHI CANTT

M&L for chipping out spilled and loose concrete cover and derusting steel reinforcement of concrete column, beam, slab, chajjas, parapets and the like as directed up to 25 to 35mm thick roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry including derusting steel wire reinforcement, providing fabric MS wire mesh 75 x 75 x 2mm as reinforcement to concrete surface applying adhesive/admixture over steel mesh and providing 25mm average thickness guniting mix using one part of OPC 53 grade and two part of sand mixed with adhesive/admixture @ pressure of 2.5 to 3.00kg/Sqcm by guiniting machine and surface finished even and fair including necessary padding, shuttering/scaffolding, formwork (guniting work to be carried out up to 10 metre height) complete as directed at site Note :- (a) After placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with wire brushes, washed with water and allow to dry, apply chemistic polycretes admixture @ 2.25 kg by weight of cement all as per manufacturers instruction. (b) when polymix concreting in taking condition,guiniting is done with polycrete admixture @ 2% by weight of cement all as per manufacturers instructions (polycrete admixture shall be procured from chemical adhesive Pvt Ltd Co or their authorised dealer). (c) Cost of the above aspect shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

Demolition of stone slab and tiles of any description or thickness on cooking platform, floors, aprons etc laid bedded and pointed in any morter complete all as specified and directed

Rounding to edges of stone slabs one edge, such as in steps cooking platefom,and other similar situations complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for Glazed ceramic tiles in vertical surface 600x 300x 7 mm to 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendering in cement mortar (1:3) complete all as specified and as directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:4 complete all as specified and directed.

S & F for glazed Ceramic tiles 9 to 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm ( size 600 mm x 600 mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L for 15mm thick screed bed or bedding in CM 1:4 complete all as specified and directed

All as per item No 14 here in before but as in skirting laid over and including 10mm thick backing coat of cement mortar (1:3), complete all as specified and directed.

Demolition of cement concrete in above ground floors exc 15 cm thick above ground floors.

M&L for applying a coat of cement slurry @ 0.488 Kg/Sqm mixed with tapercreate @ 0.253 Kg/Sqm after cleaning and drying the old/new surfaces(Make of tapercreate M/S CICO Engg Services) then applying the layer of fibre glass cloth while the above coat is still green. The overlap of fibre glass cloth shall be not less than 100 mm.(Make of fibre glass cloth M/S The Structure Water Proofing Co Pvt Ltd) and then applying 1.5 mm thick layer @ 1.288 Kg/Sqm mixed with taper create @ 0.570 Kg/Sqm and coarse sand @ 1.289 Kg/Sqm. Allow the treatment to air curing for four hours followed by water curing for 48 hours all as directed.

M&L Cement concrete Type F2 (1:5:10) using 40 mm graded stone aggregate in mass concrete in sunken floor complete all as specified.

S & F in repairs 15 mm dia 600mm long PVC connections with brass check nut complete Make Polytuff/symet or equivalent

S&F counter sunk vitreous china wash hand basin of size 550x400x140mm , ivory, including waste coupling and waste pipe complete all as specified and directed.

S&F in repair PVC waste pipe 32/40 mm bore, 65 cm long for sink etc complete.

S&F in repairs bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified

S&F in repairs angle valve, fancy type, chromium plated brass, 15mm, complete all as directed.

S&F in repair stainless steel sink with drainage board standered size made out of 1mm thick sheet for kitchen with plug, washers, waste pipe, waste coupling incl fixing cast iron cantilever bracket connecting union with bowl size410x330x160mm complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing. complete all as specified and as directed.

mm bore and connection including cleaning for refixing. complete all as specified and as directed.

Cutting chases or making holes, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth.

S&F 25mm outer dia CPVC pipes SDR 11 with and including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F 20 mm outer dia CPVC Brass Tee complete all as specified and directed

M&L for rotational moulded polyethylene water storage tanks white colour 1000 lts capacity, four layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT float valve, lid tank cover for polyethylene and polyethylene ball including taking out existing 1000 Ltr unserviceable PVC tank of any description including fitting and fixtures complete all as specified.

M & L for disconnecting existing tanks, capacity exc 500 & not exe 1000 Litres, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting if required reconnecting and refixing in position complete all as specified and as directed by the Engineer-in-Charge

S&F for PVC (SWR) bends any radius, 75 mm bore complete.

S&F for 75 mm PVC (SWR) Tee with door plate complete all as specified and as directed.

S&F for 75 mm bore PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in solvent cement concrete complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete.

M & L for Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 75mm thick, finished fair and even without using extra cement complete.

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A'

Supply and fixing in repairs, Locks with duplicate keys for Almirah large steel/ Almirah Med steel/ Almirah MAP/ Almirah 1/2H 1/2 S after removing old damaged/ unserviceable locks.

Supply and fixing the SS knobs screw type to wooden steel furniture articles in repair/ replacement after removing the existing damaged knobs making the furniture drawers functional.

Supply and fixing pin type PVC caster wheels to the chair revolving long back/ chair revolving/ chair computer and all other similar chair revolving after removing old damaged caster wheels and fixing the new caster wheels with proper workmanship to make functional the chair.

Chari Varandha

M&L for 5 mm thick rendering with redimix plaster (as per manufaturer's instruction) on faces of brick or concrete surfaces finished even and smooth surface wihtout using extra cement on ceiling of up to four stories bldgs.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete.

M&L for waterproof putty @ 1 Kg (undiluted) per sqm of average thickeness 1-2 mm over the new plastered surfaces wall/ceiling new surface with machenical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step - 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step - 2) Applying the first coat the prepared mixer with the help of fully autometic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a miximum pressure 3300 PSI Step - 3) Allow 6-8 hrs time to dry the putty surface. M&L for applying two coats of oil bound distemper on wall/ceiling using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose langth of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by pain manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as secified and directed. Note: Sanding of surface to be done by mechanical sander with 150 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

M&L brick work in cement mortar (1:6) using sub class 'B' bricks, straight or curved on plan exc 6 mtr mean radius complete all as specified.

Taking down chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete.

Taking down shutters of any description exc 1 sq. m and not exc 2 sq. m each complete all as specified and as directed by the Engineer-in-Charge

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other frames/chowkhat of size 65 x125 mm comprising of vigin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ricehusk/

wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100 g,s) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.(MS hold fast/hugs or SS dash fasteners shall be paid for separately) Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made all as specified and directed.

Providing 30mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER with edge lipping tape allaround 0.8mm to 1.00mm thick, consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). The door should be water proof, termite proof,fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through Other hardwares shouldbe fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings.” Note: Fixture/fittings shall be measured & paid under relevant item

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick with edge lipping tape allaround 0.8mm to 1.00mm thick, comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed.

S&F fabricated aluminum window with powder coated anodized aluminum frame of section 63.5mm x 38.10mm x1.5mm thick, shutter with section 47.62mmx44.45mmx1.5mm thick including aluminum anodized “D “ handle, hinges, peg stays, tower bolts, etc including jointing cleats for fixing builder's hardware fittings & stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including necessary fittings/fixture /aluminum snap beads complete all as specified. Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately.

S & F for mild steel, 300 mm ordinary rat tail rod pattern springs including roller and r

oller plate complete all as specified.

S&F 100mm size butt hinges stainless steel of AISI 304 complete all as specified and directed.

S&F 300 mm long, stainless steel of AISI 304 grade, sliding door bolt with hasp, staple (bolt type) and fixing clipss of sheet, cast or extruded sections and fixing bolts and fixed etc complete all as specified and directed.

S&F stainless steel of AISI 304 grade handle of size 200mm size long etc. complete all as specified and directed.

M&L in repairs for 18 mm thick wood plastic composites (WPC) board for partitions, 100% solid with density not less than 650 Kg per cubic meter , both side white finished laminated for exposed/external surface , fixed with screws fitted under or above the kitchen cooking platform and/or other platform, in Cupboards or below counter top washbasins including all necessary fittings and fixtures and dismantling existing boarding complete all as specified and directed. Note : (a) Pattern & design of WPC board to be decided by GE.

S&F brass chromium plated tubular hanger rod 20 mm dia with suitable brackets complete all as specified and directed.

S& F stainless steel plate rack made of 1 mm thick stainless steel sheet of size 750 mm x 900 mm x 210mm consisting of 3 shelf for bowls and one shelf for keeping six nos of big utensil and seven nos of small utensils divided by 10 mm dia stainless steel hollow pipe @ 60 mm centre to centre or as per drg and sample kept in GE"s office all as specified and directed by engr-in-charge complete.

S & F CP clip on hinges (Inset) complete all as specified and directed .

S&F SS tower bolt size 125mm complete.

S&F 100 mm long, stainless steel of AISI 304 grade, hasp and staple, safty type, incl bolt to hinge plate and fixed with screws etc. complete all as specified and directed.

M&L for preparation of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel & steel based surface of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F in repair CP brass health faucet with hand shower and 1.5 mtr flexible stainless steel pipe suitable for fixing to 15 mm dia pipe complete.

S&F in repairs 6 mm thick glass corner shelf fancy type (Set of 03) with railing and fitting complete of size 25cm x 25 cm of best quality (as per sample approved by Engr -in-charge)

S&F in repairs wash hand basin mixer single lever 15mm dia CP brass fancy type including joints to CPVC pipe or unions all as specified.

M & L for Providing and injecting chemical chlorpyrifos emulsifiable concentrate for Post Constructional Anti termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.

M & L for Anti termite Treatment of soil under existing floors using chemical chlorpyrifos emulsifiable concentrate @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors all as specified .

Taking down carefully aluminium/copper point wiring (light/fan/bell/socket /power) with complete fittings such as steel terminal boxes, switches, ceiling roses, pendents, regulators, sockets etc and removing the material including making good the distrubed surfaces of the wall flooring ceiling etc to match the existing surface all as specified and directed by Engr-in-Charge.

Per Ten Sqm

All as per item No 2 above but 5 Amp socket outlet on same board.

All as per item No 2 above One socket outlet 5 Amps on independent board.

All as Item No 2 above but for one socket outlet 5/15 Amps on Independent board with cables 2.5 sqmm size for phase and neutral and 2.5 Sqmm for earthing complete.

All as Item No. 2 above but for one light point controlled by two 2-way switches with cable 1.5 Sqmm size.

M&L for concealed point wiring complete with stranded copper conductor 4 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable drawn through concealed PVC conduit complete including 4 sqmm copper cable earth continuity wire to common earth and connected to earth dolly complete all as specified for one socket outlet for modular AC Box on Independent board with cables 4.0 sqmm size for phase and neutral and 4 Sqmm for earthing complete. Note:- the rate is inclusive cutting /chasing and making good the disturbed surface with cm 1:3 and same surface finishes with the adjoining surface of disturbed area with OBD/colour wash/white wash complete

S&F switch modular type, 1 way 6A, 1module.

S&F switch, Modular switch 2 way 6A, 1 module.

S&F Modular Socket, 6A - 2/3 pin 2 module.

S&F Modular AC box with socket and MCB SP 20 Amp complete with Metal box , white colour plate and frame complete in replacement of sheet metal enclosures as per site requirement , complete all as specified and directed.

S&F switch modular type 1way 16A, 1module with indicator

S&F Socket 6A/16A - 2/3 pin combined .

S&F of electric bell Ding Dong type AC, 230 volts single phase all as specified.

S&F Modular Bell push 6A 1 module

Per 10 RM

S&F in replacement of lamp holder Angle/ Batten type bakelite insulated body with back plate all as specified and directed.

S&F of LED lamp 12 Watt LED Re-Chargeable Bulb complete all as specified and directed.

Taking Down of ceiling Fan and keeping in safe coustody and refixing it back after completion of B/R work complete all as specified and directed.

M&L for concealed point wiring complete with stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable drawn through concealed PVC conduit and including replacement of unserviceable pressed steel terminal boxes with Modular steel terminal boxes factory made including white cover modular plate with frame suitable for modular switches, modular sockets, modular fan regulators etc of required size complete including 1.5 sqmm copper cable earth continuity wire to common earth and connected to earth dolly complete all as specified for One light/Fan/Bell point controlled by one 5 Amp switch one way using cable (1.5 Sq mm for phase and neutral and 1.5 sqmm for earthing) . Note :- The rate is inclusive cutting/chasing and making good disturbed surface with CM 1:3 and same surface finishs with the adjoining surface of disturbed area with OBD/Colour wash/white wash complete.

S&F Fan step regulator, 120W - 2 module type complete all as specified and directed.

S&F in replacement decorative wall light mounting suitable for LED lamp upto 12 Watt including all connections complete all as specified & directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC aluminium housing decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F in replacement of LED bulk head in engineering plastic housing with clear prismatic diffuser, 10W WHITE including all accessories connecting up twin core flexible copper conductor cable complete all as specified & directed.

S&F ceiling rose surface Bakelite 65x25mm three terminals complete all as specified.

Supply and fixing LED lights fitting 10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F PVC connection with brass nipple 15 mm x 600 mm long with ISI marked, stainless steel, suitable for hot and cold water of 25 ltrs capacity of geyser as hot and cold water connection complete all as specified and directed.

Supply and fix in replacement of MCB DB SPN 16 Way with metal double door, (IP43 Protection) flush mounting epoxy powder control having 100 Amps rated bus bar complete all as specified and directed .

S&F in replacement MCB SPN 63 Amps 'B' series, breaking capacity 10 Ka, 'B' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc.

S&F for MCB SP 6 to 32 Amps 240 Volts, 10kA, `B' curve all as per site requirement and as directed.

Note for the above work : The contractor is required to provide a person proficient in speaking English & Hindi with a mobile with a SIM, computer, printer & internet connection to access the Complaint Mgt Portal for taking complaints through call VYNUS (Online Complaint Management System) & whatsapp. The place for establishing the complaint cell will be provided by GE. The ibid person shall note down the complaint in register & deploy resources for cleaning complaints within working hours. The report of complaint shal

l be noted in the register and shall be shown to AGE/JE every day before closure of office/ working hours.Rates for ibid service is deemed to be included on quoted rates of BOQ.

Supply and fixing in repairs, SS Chrome plated handles for Almirah large steel/ Almirah Med steel/ Almirah MAP/ Almirah 1/2 H 1/2 S after removing old damaged/ wornout chrome handles.

The furniture articles shall be prepaired smooth after removing dents or tightning the frame with welding if required or providing any screw/ nut & washir if required, applying putty for planning of surfaces. All new parts/ area where there is no old paint exists, one coat of primer of best quality as approved shall be applied. The painting shall be done after prepration of surfaces paint OG/ Black/ White/ Sky Blue/ Grey replacing the existing shade/ colour achieving its glossy look. Rest all as directed by Engr in charge/ Accepting officer.

Almirah Large Steel/ Alm MAP or 1/2H 1/2 Shelves etc

Almirah Med Steel

Charpoy Folding IP

Charpoy IP Ply Top : FD/MAP-II/01

Rack Shoe Steel

Teapoy Varandha

Table Computer

Material and labour for polishing to the wooden furniture articles. Polishing the articles shall be cleaned up with a clean cloth and applying suitable sandpaper paper to remove dirt/ dust. The furniture articles/ parts shall be prepaired smooth after removing dirt/ dust etc, making wooden surfaces smooth by applying wood filler and putty on cracks / jonts and applying suitable colour to the base for prepration of base. Two coats of best quality polish as approved shall be applied for glossy look. The polishing shall be done only after prepration of surfaces. Rest all as directed by Engr in Charge/ Accepting Officer.

Bed Plywood Top : FD-246/247

Bin linen

Chair Dining : FD-279/16/250/228/MAP JCO-OR

Chair Dining long back/ MAP

Chair Easy : FD/-229/201/17

Peg Table : FD-277/384, DB-3973

Side board

Sofa Set 4 Seats

Sofa Set 5 Seats

Stool drssing

Table Centre : FD-274/ 235

Table Dining 6/8 Pers

Table Wiring

Teapoy : FD-278, 34, 382

Taking Down of Exhaust Fan and keeping in safe coustody and refixing it back after completion of B/R work complete all as specified and directed.