WBPWD/SE/SWEC/NIQ11/2025-26

Amount

PART-A[SITC OF AC M/cs at SNCU,OT& REPLACEMENT OF AC M/cs at BLOOD BANK,SUPER ROOM,LABOUR ROOM

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment

6 way Enclosure (for DG Power only)

Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment as to GS.

6 way HTPN

Supplying and fixing 240/415 V MCB type Isolator on din rail of existing DBs and necessary connection

Supplying and fixing 240/415V, MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection

6A - 32A SP MCB

Supply and Drawing 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed copper wire of following sizes in thick heavy gauge polythene pipe and necy. connection as required incl. cutting channel of (40mmx40mm)/(43mmx43mm)size on masonary wall with S&F heavy gauge 19mm/25mm dia 3mm thick polythene pipe by means of iron hooks and mending good damages to building works

2 x 4 sqmm + 1 x 2.5sqmm (for AC )

Supply & Delivary of following sizes 1.1 kV grade Al. armoured PVC/XLPE insulated cable

4 core 35sqmm

Laying of cable on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting

4 core 35sqmm

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :

4 core 35 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials

4 core 35 sqmm

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. as per G S

Supply & Fixing of OLP3 - 30A AC Starter with G.I box flushed in wall with voltage check, Amp check, Time check incl. all connection.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket, without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc as per G.S.

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator & necy. Connections.

Supply & Delivery of fixed speed wall mounted type split airconditioners with rotary compressor having following major specifications 1. Rated Cooling at 100% Capacity : 6700W or Higher 2. Rated Power Consumption at 100% capacity : 1800W or lower 3. ISEER Rating : 3.8 or Higher 4. BEE star Rating : 3 star or a standard Star rating satisfying the ISEER rating as per the manufacturer standards["Revisions in star rating shall be permissible, subject to a corresponding enhancement in the specified ISEER rating."] 5. Air-flow/IDU- : 800 CFM or Higher 6. Evaporator & Condenser Coil- Copper made 7. Refrigerent -R410A/R32(Green Refrigerant) 8. Capacity- Suitable capacity in TR satisfying the above specification. 9. Power Supply :220v, 50Hz,1Ph AC (with applicable tolarance) [ Brands are mentioned in Approved make list for this project, [uploaded with tender documents] (Price includes supply of IDU/ODU and complete set of installation kit (OEM make only) incl. 3 mtr. of interconnecting pipes,tubes, ECC etc. as offered by manufacturer)

Installation, Testing & commissioning of Split type AC both indoor/ outdoor unit incl. S& F of 40 X 40 X 5 mm MS angle iron frame for installation of ODU and sealing of the holes in wall created during the copper pipe connection between IDU & ODU by proper sand-- cement plastering and painting (both inside and outside) to match up with the original finish mending good the damages to complete the instn as per direction of EIC.

Supply & Fixing of the - (i) gauge copper pipe 5/8" 0.7 mm thick for suction (ii) copper pipe 1/4" 0.6 mm thick for discharge (OEM make) with 9 mm thick thermal insulation foam both for suction & discharge pipe and mending good the holes & damages as directed by EIC. (extra length for distance of ODU & IDU exceed 3 mtr.)

Supply & Laying of 4 core 2.5 sqmm PVC insulated & unarmoured copper wire for Split AC machine (extra length for distance of ODU & IDU exceed 3 mtr.)

S & F of flexible PVC high quality water carrying pipe of proper size for draining water from already installed AC to any available (nearest) drain water pipe or near to ground level and the pipe must be properly saddled with the wall incl. proper insertion of the flexible pipe to drain water pipe and sealing the entry with required materials like PVC tape, High quality sealing the entry with required materials like PVC tape, high quality sealing gum etc. as reqd. All these arrangement for fixing must be arranged by the agency itself as per direction of EIC.

Supplying and fixing Timer box 10way SPNDB ( Make - L & K ) . fixed in wall on flate iron frame as per direction EIC.The Box shuld comprising following accessorise. A) 230 V , 50 Hz ,16 Amp Single dial 1 x 24 Hrs.Timer similar to ( Microrex QT31 ) of quartz driven running reserve Day dial back up by nickle cadmium battery (Make - GEC) – 1 no B) One no. ML-3 conctractor,(L&T make) with ( 2 NO or 1 NO + 1 NC Aux. Contract )( Make - L & K ) – 1 no C) 4 pole 32 Amps MCB ( Make - L & K ) - 1 no D) Auto / Manual By pass Toggle Switch arrangement – 1 no. ( Make - L & K ) E) 250 V , Diode type neon Indicator lamp ( Make - L & K ) – 1 no F) Bakelite base with FP bolt type stud / Terminal block incl S & F Neutral Bar , with spring washer ,nuts etc with this box for termination of power to complete arrangement must be wiring by 4 Sq mm PVC insulated Cu wire with suitable length incl socketing /lugs etc as per requirement & direction of EIC (for controlling outdoor street light fitting fittings) ( Make - L & K )

PART-B [SITC OF FDA SYSTEM AT OUTDOOR, BLOOD BANK, OT,LABOUR ROOM]

Supply, Installation,Testing & Commisioning of Micropresssor controlled Addressable Multisensor detector IP 42 ( VDS / UL /ERTL/ LPCB / FM approved ) with inbuilt optical smoke sensors and heat detector sensor with inbuilt short circuit fault isolator as per NFPA style 7 wiring complete with base (Note : Detectors without built-in fault isolator is also acceptable provided one independent short circuit fault isolator per detector is to be provided extra without extra cost) the detectors should have built in response indicator with LED indicator. The detector should have 360 degree optical view with single / multiple LED that blinks on actuation of detector. Reverse polarity or faulty zone wiring shall not damage the detectors. (Brands are mentioned in Approved make list for this project, [uploaded with tender documents] )

Supply, Installation,Testing & Commisioning of Addressable Manual Call Point ( VDS / UL /ERTL/ LPCB / FM approved ) with in built short circuit fault isolator as per NFPA style 7 wiring complete as required. (Brands are mentioned in Approved make list for this project, [uploaded with tender documents] )

Supply, Installation, Testing & Commissioning of IP Addressable Loop Powered Hooter ( sound output of minimum 90 db ) cum strobe (strength of light 10 cd) complete with inbuilt short circuit fault isolator. Degree of protection IP65 ( VDS / UL /ERTL/ LPCB / FM approved) approved. (Brands are mentioned in Approved make list for this project, [uploaded with tender documents] )

Supply, Installation,Testing & Commisioning of Micropresssor controlled Addressable Heat detector IP 42 ( VDS / UL /ERTL/ LPCB / FM approved ) with combination of fixed type & Rate of Rise of Temperature feature. Detector shall have maimum triggering temperature programmable from 60 deg. C to 80 deg. C., having high level of immunity to electromagnetic influances and show alarm signal limit temperature is reached. Detector shall have inbuilt short circuit fault isolator as per NFPA style 7 wiring complete with base (Note : Detectors without built-in fault isolator is also acceptable provided one independent short circuit fault isolator per detector is to be provided extra without extra cost) the detectors should have built in response indicator with LED indicator. (Brands are mentioned in Approved make list for this project, [uploaded with tender documents] )

Supply, Installation, Testing & Commissioning of Addressable Monitor Modules ( VDS / UL /ERTL/ LPCB / FM approved ) for monitoring Flow switches / Fire exit doors / AHU/ Lift etc. with inbuilt short circuit fault isolator and minimum (04) four potential free contact with adjustable setting parameter likes of Input or output, complete in single or multiple housing with degree of protection IP 42 with flash LED indicator that conforms module is operational and integrated buzzer signaling maintenance alarm, complete as required. (Brands are mentioned in Approved make list for this project, [uploaded with tender documents] )

Supplying, installation, testing and commissioning of LED type Response Indicator ( VDS / UL /ERTL/ LPCB / FM approved) having 2 Nos. red coloured LED lamps including connections etc. (Brands are mentioned in Approved make list for this project, [uploaded with tender documents] )

Supply, Installation, Testing & Commisioning of Microprocessor based Intelligent addressable and network connected Repeater panel ( VDS / UL /ERTL/ LPCB/ FM approved), should have all the controls and monitoring as on the main fire alarm panel, functioning as a controller, shall allow remote command in the system reset, trouble and alarm silence and manual alarm. It shall be programmable to display information for the entire system i.e. all panels in the network, having minimum 80 characters LCD display (display system status). The system text displays shall include: Alarm missing point trouble; system test, service, local system test, extra custom test by polling circuit and address. The repeater panel should annunciate alarm and trouble conditions in the occation of signal actuation. (Brands are mentioned in Approved make list for this project, [uploaded with tender documents] )

Supply & Laying of 2 Core 1.5 sq.mm FRLS shielded copper Cable (For Loop) through 19 mm dia PVC 'FR' type Rigid Conduit pipe with necessary arrangement on the surface of the wall. (Brands are mentioned in Approved make list for this project, [uploaded with tender documents] )

Supply, Installation, Testing & Commisioning of Microprocessor based addressable fully networkable fire alarm control panel ( VDS / UL /ERTL/ LPCB / FM approved ) suitable for the devices as stated in the previous items of this BOQ along with 20% spare capacity with each loop loading not exceeding 80% of the full capacity of detectors and devices taken together, conplying to IS 2189:2008 or its latest amendments, and with minimum 600 character alpha - numeric liquid crystal display.The panel shall be soft addressable type and shall be able to give pin point location of all fire/ fault conditions. Further, the panel must be able to automatically switch off respective control switches with help monitor module whenever any alarm is triggered. The Panel should be able to store sufficient numbers of log events in its Memory as per recommended standards. The panel should have extra loop card slot for expansion of capcity twice.

The panel shall have in built rectifier, provision for external & internal printer ( if required ), Loop cards, L C D unit to indicate Fire/Fault Signal with address and analog output, complete in all respects, in built Surge protection facility, integral SMF lead acid batteries with sealed cells of 24 V capable of running for 24 hours normal working and then be capable of operating the system for 60 minutes during Emergency condition, with integral battery charger complete in all respect as required.

The FACP shall be capable of being networked ( future expansion ) with other similar FACP located at different part of the premises through single RS 485 modbus. The FACP shall have provision for interfacing with the public address system, remote computer and BMS interface.The system must be preloaded with licenced software. (Brands are mentioned in Approved make list for this project, [uploaded with tender documents] )

NOTE :- 1) The Fire Alarm system shall comply with latest requirements of -- (i) National Fire Protection Association (NFPA) Standards, (ii) IS 2189 , (iii) NFPA 70 National Electric Code, (iv) NFPA 72 National Fire Alarm & Signaling Code , (v) Local Statutory Regulations , (vi) Manufacturer Recommendation. vii) System should be integrated with the components like FACP, Detectors, MCP, Hooter, Monitor Module, Relay Module, etc. and all these components should be of same brand.

TESTS :- 1) The system shall be tested and commissioned by a qualified competent, trained engineer or technician authorized by the manufacturer of the fire alarm equipment to technically supervise and participate during all of the adjustments and tests for the system. 2) Before energizing the cables and wires, inspection and check for correct connections, and test for short circuits, ground faults, continuity, and insulation and other tests as per applicable Indian/International standards must be done.

PART-C [REPLACEMENT OF EXISTING OLD FANS (WALL BRACKET & CEIING FANS)]

Supply & Delivery of AC 240V 50 Hz 48" sweep (1200 mm) ceiling fan complete with down rod , Canopy, fork incld. Safety Wire of suitable gauge & P2 Capacitor) and all other accessories with out regulator,

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supply & Delivery of 250 V 50 HZ 18" (450 mm) high flo oscillating type metal body Wall Bracket fan operated by pull cord switch with inbuilt regulator

Fixing only cabin fan on wall/ceiling by S&F rag bolts,nuts &washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length

PART-D [REPAIR & RENOVATION OF EI WORK]

Dismentling the existing E.I. work incl existing defective , non functioning Panels , PBDB, LBDB, Main Switch etc by Co's own tools & tackles by maintening normalcy as far as possible as per direction of EIC.

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment Make-Legrand/ Siemens of the following sizes as to GS. (Normal power- 2nos, DG power-1 no)

8way Enclosure upto 160 Amp

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment

6 way Enclosure (for DG Power only)

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.

2+10 way Enclosure

Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment

8 way VTPN

6 way HTPN

Supplying and fixing 415 V four pole MCCB of breaking capacity 25kA/35kA with fixed thermal and fixed magnetic/adjustable thermal and fixed magnetic setting in existing DBs/ enclosure and necessary connection.

Supplying and fixing 240/415 V MCB type Isolator on din rail of existing DBs and necessary connection

Supplying and fixing 240/415V, MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection

6A - 32A SP MCB

63A TP MCB

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FRLS' PVC insulated & unsheathed copper wire (approved make) partly in 20mm size PVC rigid conduit 'FR' [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FRLS' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar with holes fixed on bakelite/hard rubber insulation over the welded chairs incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65 inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed] [E-15/5(d)]

Average run 9 mtr

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FRLS ' PVC insulated & unsheathed copper wire in 20mm size PVC rigid conduit 'FR', with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FRLS' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box andmending good the damages to original finish

On Board

Supply & Fixing 240 V, 2 x 6A, plug socket with separate 6 A Piano key type switch (Brand mentioned in Approved Make List) on sheet metal switch board embedded in wall incl. S & F 200 x 150 x 65 mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 20A, plug socket with separate 20 APiano key type switch (Brand mentioned in Approved Make List) on sheet metal switch board embedded in wall incl. S & F150 x 100 x 65mm MS (16SWG) switch board and bakelite /perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 2 nos. 6A, & 2 nos. 20A plug socket with separate 2 nos. 6 A & 2 nos. 20A Piano key type switch, indicator & 16A kit-kat flush type fuse (Brand mentioned in Approved Make List) on sheet metal switch board embedded in wall incl. S & F 240 x 20 0x 65mm MS (16SWG) switch board and bakelite / perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch with indicator & 16A kit-kat flush type fuse (Brand mentioned in Approved Make List) on sheet metal switch board embedded in wall incl. S & F 240 x 200 x 65 mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required ( Computer / Medical Instrument Board )

Supply and Drawing 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed copper wire of following sizes in thick heavy gauge polythene pipe and necy. connection as required incl. cutting channel of (40mmx40mm)/(43mmx43mm)size on masonary wall with S&F heavy gauge 19mm/25mm dia 3mm thick polythene pipe by means of iron hooks and mending good damages to building works

2 x 1.5 sqmm + 1 x 1.5sqmm (for Separate Plug)

2 x 2.5 sqmm + 1 x 1.5sqmm (for Power plug )

2 x 4 sqmm + 1 x 2.5sqmm

2 x 6 sqmm + 1 x 4 sqmm ( from TPN MCB DB to SPN MCB DB s )

Supply and Delivery of following sizes 1.1 kV grade Al. armoured PVC/XLPE insulated cable

4 core 35sqmm ( from VTPN to MCBPBDB )

4 core 70 sqmm ( from Panel to VTPN & Panel to DG & DG to VTPN )

Laying of one No. cable of following sizes in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed

Upto 35 sq mm

above 35 sq mm upto 185 Sqmm

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :

4 core 35 sqmm

4 core 70 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials

4 core 35 sqmm

4 core 70 sqmm

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required

50 mm dia

Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector,6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. With 25x25x3mm angle iron support 200x50x1.25mm (18SWG). [D-14/34(a)]

Laying of cable as below, on existing Cable Tray and binding with suitable size GI wire

Up to 50sqmm [F-3/6(i)]

Supply & Delivery of AC 240V 50 Hz 48" sweep (1200 mm) ceiling fan complete with down rod , Canopy, fork incld. Safety Wire of suitable gauge & P2 Capacitor) and all other accessories with out regulator,

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supplying & Fixing MS fan clamp of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting

Supply & Fixing Socket type fan regulator (Step type) (Anchor) on existing sheet metal switch board with bakelite/ perspex top cover by after making housing for regulator by cutting bakelite top cover incl. making necy. connections etc. as per G.S.

S & D 250 V 50 HZ 18" (450 mm) high flo oscillating type full metal body Wall Bracket fan operated by pull cord switch with inbuilt regulator

Fixing only cabin fan on wall/ceiling by S&F rag bolts,nuts &washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. as per G S

Supply &Fixing of angular holder (Anchor) on 3" wooden double round block incl. S&F 9 Watt LED lamp Philips make.as per direction of EIC

Supplying & Delivery 4 feet single commercial LED batten type fluorescent light fittings complete with all accessories with 1 x 20 Wt. LED Tube lamp

Supplying & Delivery 4 feet twin commercial LED batten type fluorescent light fittings complete with all accessories with 2 x 20 Wt. LED Tube lamp

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm ) flexible copper wire of 1.10 mt. length.

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board

Supplying & Fixing 240 V 10 W LED Bulk Head Outdoor Light Fittings with IP 66 Protection By Screws on wall/ceiling as per direction of EIC.

Supply & Delivary of 240V LED Flood Light made up of pressure die cast aluminium housing with cradle suitable for 360 degree rotation with 1P66 protection & IK8 protection for impact, having high power LED's with lens for uniform distribution having the following major specification . 1. Minimum Lumen Output 16200 Lumen or higher . 2. System efficacy should be greater than equal to 135 lumen/watt 3. Luminaires must have surge protection device of 4KV inbuilt with LED driver and lOKV external in the fitting 4. Driver should be BIS approved silicon lilled potted driver for trouble free service life. 5. Luminaire should have CCT-5700K, CRI> 70, THD < 10%, PF >0.95 and min. 50000 burning hours@ L70B50, having LM79, LM80 reports and must be provided from NABLaccredited Lab. Should have SMD type LED chip. Luminaire should be engraved or embossed with manufacturer's logo and must have 5 years onsite warranty from OEM. 6. Rating of luminaire : 120 W or higher or As per manufacturer design and standards satisfying the above specs.

Fixing only Floodlight fittings on top of masonary structure by 3 Nos. 10 mm dia x 87 mm long rag bolts, nuts & double washers complete either 37 mm x 10 mm MS flat support/or by other means as required

Supply & Delivery 240 V,50 Hz, Metal body Heavy duty Exhaust fan of following sizes and RPM

12" (30 cm), 1320 RPM

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following dia incld. Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long)

12" (30 cm), 1320 RPM

Supply & Fixing of OLP3 - 30A AC Starter with G.I box flushed in wall with voltage check, Amp check, Time check incl. all connection.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brands mentioned in Approved Make List), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc as per G.S.

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand mentioned in Approved Make List) & necy. Connections.

Supplying and fixing Timer panel M S Box with hing type front open door and threathed locking arrangement in one side made of 18 SWG CRCA MS Sheet of size 500x300x200 mm. fixed in wallon flate iron frame as per direction EIC.The Box shuld comprising following accessorise. A) 230 V , 50 Hz ,16 Amp Single dial 1 x 24 Hrs.Timer similar to ( Microrex QT31 ) of quartz driven running reserve Day dial back up by nickle cadmium battery (Make - GEC ) – 1 no B) One no. ML-3 conctractor,( Make - L & K ) with ( 2 NO or 1 NO + 1 NC Aux. Contract ) ( Make - L & K ) – 1 no C) 4 pole 32 Amps MCB ( Make - L & K ) - 1 no D) Auto / Manual By pass Toggle Switch arrangement – 1 no. ( Make - L & K ) E) 250 V , Diode type neon Indicator lamp ( Make - L & K ) – 1 no F) Bakelite base with FP bolt type stud / Terminal block incl S & F Neutral Bar , with spring washer ,nuts etc with this box for termination of power to complete arrangement must be wiring by 4 Sq mm PVC insulated Cu wire with suitable length incl socketing /lugs etc as per requirement & direction of EIC (for controlling outdoor street light fitting fittings) (Make - L & K )

Supplying and fixing 415V, TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc incl S&F cable end box

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.

PART-E [RECTIFICATION OF EXISTING FDA SYSTEM]

Checking, Fault Rectification, Cleaning, Testing charges for Fire Detection Alarm panel (Make: Honeywell ESSER) installed for Main Building as per direction of EIC

Checking, Fault Rectification, Cleaning, Testing charges for Repetar panel (Make: Honeywell ESSER) installed at installed forBishnupur Distric Hospital, as per direction of EIC

Checking, Fault Rectification, Cleaning, Testing charges for Multi Sensor Detector - 1285 Nos, Manual Call point - 71 Nos, loop Powerd Hooter cum Strob - 49 nos, 4 input and 2 output Transponder - 46 Nos, Response Indicator - 100 nos and Adopter - 25 Nos (Make: Honeywell ESSER) installed for OPD , G & 0 ( Gr. Floor ) & Main Building as per direction of EIC

N.B. 1. Bidders are requested to quote their rates incl. of all taxes & Duties 2. Brands are mentioned in Approved make list for this project, [uploaded with tender documents] 3. Prior approval of brands shall be obtained from the Engineer-in-Charge (EIC) before dispatching any materials to the project site 4. Samples may be collected and sent to accredited laboratories for testing. Bidders are requested to quote their prices accordingly, excluding any carrying or transportation charges for such items. 5. The Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them. 6. Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work/submission of bill. If any refurbished material is supplied and installed, penal action will be taken as per existing rules( For major items only mentioned in Approved makelist/Brandlist for this project)

Swarnendu Sarkar (BID ID -6630764)

UJJWAL MUKHERJEE (BID ID -6630710)