PROVISION OF WALKING PLAZA AT NORTH CAMP AT AF STN BAMRAULI UNDER GE AF BAMRAULI

M & L for brick work with sub class 'B' modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete. including Demolition of brick work,PCC Block or stone/boulder masonary built in cement mortar/lime mortar including all quoins, arches, pillars etc, complete all as specified & directed.

M & L for 15 mm thick rendering on brick work or concrete surfaces in CM 1:4, surfaces finished even and fair, complete all as specified & directed.

M & L for 15 mm thick rendering on brick work or concrete surfaces in CM 1:4, surfaces finished even and fair including Taking down cement plaster of any description from brick,PCC Block or stone walls etc. and raking out of joints, hacking for key, scrubbing down with water etc and then after preperation of newly plastered surface applying a layer of putty and then apply two coat of weather coat paint, complete all as specified & directed.

M & L for Surface Excavation n exc 30 cm deep and averaging 15 cm deep & getting out in hard /dense soil, complete all as specified & directed.

Removing excavated material (soils) n .exc 50 m and depositing, where directed at a level n. exc 1.5 m above the starting point, complete all as specified and as directed.

M&L for hard core of broken stone or boulders guage n exec 63 mm deposited and levelled in layers n exec 15 cm thick watered and rammed to a true surface of broken bricks aggregate, complete all as specified & directed.

M & L for 75mm thick PCC 1:2:4, type B-2, as in pavings/hard standing/path etc finished uneven and rough without using extra cement complete including Demolition of cement concrete as in ground floor and paving n.exc 15cm thick below or above ground level, complete all as specified & directed.

Providing and laying 16mm EPDM PLAYGROUND SAFETY FLOORING (9 mm SBR bottom layer+ 6mm EPDM top layer)EPDM GRANULES manufactured in India under quality management system of ISO 9001.2015 or above having polymer content 20-22 %, High UV rating mir3-4/5 on grayscale,VOC less than 3.0g /Combustibility less 40 mm /min test method UL-94HB, elongation at break more than 500 %, REACH/SVHC & ROHSCOMPLIANT, ANTIMICROBIAL & ANTIFUNGAL TESTED MATERIAL, standard grain size 1.0-3.5mm & laying in three layers.i.e Layer 1 Polyurethane based primer coatingLayer 2-9 mm black rubber base particle long rubber stands/ sbr rubber crumb mix with. 12-14% single competent PU base binderstyrene butadiene rubber/ synthetic rubber. Layer 3-6mm EPDMGRANULES chemicaly bonded with MDI 18-20 % with'single component of Diphenylmethane Discocyanate and paraffinic oil etc.Design on base top layer by specialized team of installers according tothe specification of approved material and shade as per the direction of engineer.

M& L for providing precast cement concrete rubber moulded coloured interlocking tiles 60 mm thick with grey cement and pigment of approved design and pattern laid over a layer of 25 mm thick sand cushion including filling the joint with sand, complete all as specified & directed.

M&L for MS TMT bars 10mm dia and over cut to Length bent to shape required including cranking, bending, spirally for hooping for columns with an incl MS wire(Annealed not less than .90 mm Dia) or securing with clips, complete all as specified and directed.