A R and M O Non Residential Building (Secretariat Complex ) under SD-II, PBSD during 2024-25 Sub Work -Special Repair and Renovation of Room No.103 and 105 including attached toilet.

Amount

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead :

Thickness above 10 mm up to 25 mm

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :

Superior hard Wood Cat-II(A)

Providing and fixing in wall lining marine plywood (IS : 710) with necessary fixing arrangement and screws etc. complete

12 mm thick marine plywood (Century of equivalent)

Providing and applying anti termite coat of Dr.Fixit in the internal portion of wall panelling use 0.25 Ltr / Sqm.

Providing and fixing Veneer plywood BURMA TEAK 4 mm thick of Superior quality including fixing with necessary screws complete as per the direction of Engineer - in - charge (minimum cost range of BURMA TEAK 4 mm thick veneer plywood shall be 1200/- Sqm).

Plywood BARMA TEAK 4 mm thick

Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in- charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately).

Providing and fixing 3 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof truss pipe complete as per direction of Engineer-in-charge.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer Godrej or equavalent (having brand logo with ISI mark embossed on the body, door weight upto 60 kg and door width upto 900 mm), with necessary accessories and screws etc. complete.

Providing and fixing Desinger Cement board of size 610x610 mm and fixed in aluminium frames with suitable screws as per the direction of Engineer - in Charge (frame work to be paid seperatately).

6 mm thick Designer Cement fiber board

Providing and fixing wooden moulded corner beading of with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class hard wood Cat-II (A).

40x40 mm (base and height)

Providing and fixing angular stop cock with wall flange of make of Jaquar Code No. OPPCHR1505 as per the direction of Engineer-in-Charge.

Providing and fixing Soap dish holder of make Jaquar of model no. ACN-1131N or equivalnet of good quality with necessary screws etc as per the direction of Engineer-in-Charge.

Providing and fixing toilet paper holder of make Jaquar of model no. CAN CHR 1153S or equivalent of good quality as per the direction of Engineer-in-Charge,

Providing and fixing towel ring of model No. Z/AEC-ESS 1121N of make Jaquar or equivalent of good quality as per direction of Engineer-In-Charge.

Providing and fixing towel rail Jaquar of code JAQ-ACN-CHR 1111SM or equivalent fixed to wooden cleats with necessary screws etc. as per the direction of Engineer-in-Charge.

Providing and fixing glass shelf of size 600 mm long (model No. ACN-CHR-1171N) of make Jaquar or equivalent with necessary fittings & screws etc. all complete as per the direction of Engineer-in-Charge.

Providing and fixing Z/beleved edge mirror SHANTI of size 24" x 18" of make Jaquar with C.P Brass screws etc. complete.

Providing and fixing Z/CP Health Faucet with metal hose in polished chrome (Similar to model-complementary, Code No. ALD-CHR-573 of make -Jaquar or equivalent) complete as per direction of Engineer-in-Charge.

Providing and fixing two way bib cock of approved quality make Jaquar (Code JAQ FLR 5041N) or equivalent as per direction of Engineer-in-Charge.

Providing and fixing unplasticised P.V.C connection pipe with brass unions of approved quality. A) 60 cm length i) 15 mm nominal bore.

Providing and fixing Soap dispenser of make Jaquar of model no. ACN-CHR-1135N or equivalnet of good quality with necessary screws etc as per the direction of Engineer-in-Charge.

Providing and fixing corner glass shelf crome (with bracket) of make jaquar of model No. ACN - CHR - 1173 or equivalnet of good quality with necessary screws etc as per the direction of Engineer-in-Charge.

Cleaning tiles with diluted hydrochloric acid including removing grout from tiles joints etc. complete as per the direction of Engineer-in-charge.

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/ 120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

Providing and fixing curtain with superior quality cloth (Vimal or equivalent) including curtain stiching in frill model with canvas, curtain tapering etc. complete as per the direction of Engineer - in - charge .Standard width (1.20 mtr)

Providing and fixing stainless steel Curtain rods of standard quality (25 mm dia).

Providing and fixing curtain holder stainless steel decorative type of approved quality with necessary screw etc. complete.

Providing and fixng curtain centre support wherever required of standard quality.

Mega Engineers and Builders

ARJUN MANDAL

B M SINGH