Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 2 | Admitted-Fee/PreQual/Technical/Finance 1A 20 EAST SEERANAGAPALAYAM ROAD SALEM 63607 | 63607 | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹99 L
EMD Value
₹99,000
Closing Date
6 Dec 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
THE COMMISSIONER, SALEM CITY MUNICIPAL CORPORATION
Salem City Municipal Corporation, Fort Main Road, Salem
Construction of Integrated Welfare Hospital at Ammapet Ward Office in Division -40 (Zone-III) Salem Corporation
2023_MAWS_391098_1
E4/EST NO.255/B/2023-2024
Open Tender
Civil Works
Lump-sum
180 days
SALEM CITY MUNICIPAL CORPORATION
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹99,000
6 Dec 2023
20 Nov 2023
6 Dec 2023
20 Nov 2023
6 Dec 2023
20 Nov 2023
Amount
Dismantling, removing and carefully stacking press tiles with weathering course etc, complete as directed by the departmental officers
Dismantling the damaged floor finish and dadooing walls in cement mortar with mosaic tiles / Glazed tiles/ cuddapah slab and clearing away with carefully stacking the material useful for reuse for any thickness etc., complete complying with standard specification and as directed by the Departmental Officer.
Earth work excavation for foundation in ordinary soil, light black cotton sandy loam and dry silt including shoring, strutting, baling or pumping out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick and depositing the surplus earth at places as directed by the departmental officers with initial lead and lift - 10 m3
Supplying and filling in basement with M.Sand in layers of 15cm thick including watering and ramming to consolidation 1 m3
Plain cement concrete 1:4:8 mix (One cement four M.Sand and eight aggregate) using 40mm size ISS gauge HBBG metal including mixing, laying, consolidating, curing, cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification - 1 m3 (detailed data for 10 m3 )
Plain Cement concrete 1:2:4 (One cement Two M sand and four broken Machine crushed stone jelly) using HBG Machine crushed stone jelly of size 20mm gauge for founding and basement including de- watering if found necessary and laid in layers of not more than 15cms thick etc., complete
Flooring with Solar Reflective Ceramic Tiles of size 305mmx305mmx7mm thick of approved colour and quality of required size laid in cement mortar 1:3 mix 20mm thick and pointing with the same mortar complete and finish very neatly etc complete
Re Painting the walls with Two coats with first class quality Plastic Emulsion paint ( Exterior) of approved colour over a priming coat including thorough scraping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) S I No 358
Painting with best synthetic enamel paint of approved Colour and high quality one / two coats to old / new iron works
Plain Glass - 4mm thick
Reinforced Cement concrete 1:1.5 :3 (one cement, one & half M.sand and three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete.
Foundation & basement
6.) Supplying, fabrication and placing in position of steel reinforcement using mild steel of Ribbed tor steel rods, for all RCC works as per the design given by the departmental officers including cost of steel and binding wore and all labour charges for cutting, bending & tying etc., complying with standard specifications - 1 Quintal
1. Supplying and erecting for shuttering, including necessary supports for plane surface in foundation and basement for RCC column footings, Plinth beams, staircase steps, etc., using mild steel sheets of size 90cm x 60cm and 10gauge, stiffened with mild steel angle of size 25mm x 25mm x 3mm for boarding, supported by silver oak joists of size 10 x6.5cm, spaced at about 90cm centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete, complying with standard specifications and as directed etc., complete - 1 m2
For column footing, Column pedestals, plinth beam, grade beams, staircase stpes, etc.,
For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc
Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230x110x70mm (8 3/4" x 41/4" x 23/4") including cost of materials and labour charges etc. as per std. specification - 1m3
Upto 4.50m height (from plinth level)
Random rubble masonry in cement mortar 1:5 mix with using old blue granite rough stones for foundation and basement 10 m3 (Old stone supplied by department)
Plastering with cement mortar 1:5 mix, 12mm thick - 1 m2
Special ceiling plastering and finishing all RCC exposed surfaces such as RCC slabs, sunshades, canopies, stair case steps, landing slabs etc with CM 1:3 (One cement and three M sand) 10mm thick including hacking the surfaces and providing necessary CM nosing, beading as per size specified wherever necessary using the same mix etc., complete complying with standard specification and as directed by the Departmental Officer. S.I. 309 -- TNBP No. 55& 56
Construction of inspection chamber of size 1'-1 1/2" x 1' - 1 1/2" of TD No.13/1944 and of the following description. The foundation of inspection chamber to be cement concrete 1:5:10 mix using 40mm ISS gauge HBBG metal, the wall will be of brick work in cm 1:5 mix, using country bricks and plastered with cement mortar 1:4 mix, 12mm thick on both sides. The sewer channel in the chamber to be formed in CC 1:3:6 mix using 20mm ISS gauge chips and finished with 1:2 mix cement mortar 12mm thick. The channel must be formed well by construction at site for the alignment in including excavating earth work in all soils, shoring strutting and baling out water wherever necessary etc., - Each
Roofing with Pre painted Galavalume sheet 0.47mm thick with necessary bolt and nuts and washers including allmaterials and labour charges etc complete - 10m2
Supplying and fixing in position of "L" angle of size 50x50x 5 mm for vertical post and supporting posts for fixing and tying the barbed wire as per standard specification and as directed by the departmental officers.
Supplying and fixing in position of Chain link (Fencing - TATA Brand or Equivalent)of size 2"x2" using 10 guage binding wire and tying with 2.5 mm GI wire at 0.50m vertical interval from base level (3 lines for 1.50m height) to the entire length of fencing with suitable RCC 1:2:4 or L Angle Post at centre to centre and to centre inserted with 2.5 mm GI Barbed wire (5 lines) at a vertical spacing of 0.30 m centre to centre to the entire length of fencing and further tigntened with 10 gauge binding wire etc., complete complying with standard specification. (Including barbed wire 5 lines - 0.30m c/c and excluding cost of RCC Post)
Paving the flooring with cuddapah slab of size 50 mm thick both side machine polished edge and machine polished cutting for flooring using CM 1:3 (one cement three M sand) including labour for fixing in position i etc., complete complying with standard specification and as directed by the Departmental Officer TNBP No Spl. And similar to 62
Cuddapah slab 50 mm thick
Supplying and fixing in position white glazed European water closet with P or S trap and double flapped seat cover, 10 litter capacity low level flushing tank including all internal fittings on CI brackets, 12mm brass nipple, chromium plated brown headed stop cock, 12mm nylon connection connecting with walls and floors including dismantling masonry and redoing the same to the original condition etc., complete complying with standard specification and as directed by the Departmental officers.
Supplying and fixing in position Indian water closet Oriya type of size 580x440mm white glazed earthen ware of approved quality with ‘P’ trap or ‘S’ trap conforming to IS: 2556-part XII with sand cushion and forming flooring all-round the closet using 40mm broken brick jelly in lime concrete 1:2:5(one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to PVC pipes by dismantling brick masonry, reinforced cement concrete roof/ floor slab and making good the dismantled portion to original condition without leakage etc. complete complying with standard specification and as directed by the departmental officers (The water closet should be got approved by the Executive Engineer before use on work.)
Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550x400mm with a pair of cast iron brackets, including cost of 15mm dia metre brass chromium plated pillar tap, 32mm dia metre G. M. Wheel valve, 15mm dia brass nipple 15mm dia nylon connection etc. including fixing the wash hand basin in the wall in position with pair of CI brackets with teak wood plugs and screws and giving necessary water supply connection and painting the brackets with two coats of paint over a priming coat of anticorrosive paint including testing for leakage etc. complete complying with standard specification. The quality and colour of wash hand basin and specials should be got approved by the Executive Engineer before use on work.)
Supplying and fixing of White Marble partition slab for Urinals of 1200 x 600mm size fixing to wall using 3 nos. of suitable C.P brackets with C.P bolts, nuts, washers, cutting to the shape, polshing to all the exposed surfaces abd edge grinding etc. complete as directed by the dapartmental officers- 0.72 m2
Supplying and fixing in position of Indian make white glazed earthen ware lipped mouth flat back urinal of best approved quality with GI connection of suitable length 32mm bell mouth PVC connection 15mm dia GM wheel wall fixing the urinal in the wall position with necessary TW plug, clamps, screws, shellac etc., including the dismantling the masonry if necessary and redoing the same to its original condition fixing the 15mm dia GI pipe and wheel wall painting the pipe two coats of approved colour of synthetic enamel paint over one coat of primer and etc., and checked without leakage etc complete complying with standard specifications and as directed by Departmental Officers.
Paving the flooring with best approved quality and colour of Double charged Vitrified tiles of size 600x600x8mm over a base layer of cement mortar 1:3(One of Cement and three of sand) 20mm thick and pointing with same colour cement neatly etc., including the finishing the joints and appointing flush with even surfaces etc., as directed complying with standard specifications the tiles should be got approved by the Executive Engineer before use on work.
Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
Paving the flooring with plain ceramic tiles of approved quality, colour and design joint free of size 305x305x6 mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officers. The colour & quality of tiles should be got approved by the Executive Engineer before use on work.
Colour and Design ceramic tiles of size 200 x 100 x 6 mm
Dadooing the walls with glazed tiles of printed design of best approved quality and colour in all shade of the glazed tiles in all floor over a base layer in cement mortar 1: 2, (one cement two sand) 10mm thick and laid in situ true alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 to suit the colour of the tiles fixed in position without any air gap in the tiles neatly etc., complete complying with standard specification and as directed by the Departmental officers. The colour & quality of tiles should be got approved by the Executive Engineer before use on work.
Dadooing with printed design colour glazed tiles of size 300mmx200mmx6mm
White washing, Painting, Distempering,Varnishing & Polishing
Painting two coats with ready mixed plastic emulsion paint of 1st class quality and of approved color over a priming coat including through scraping clean removal of dirt etc., complete and including necessary plaster of paris putty wherever required - 1 m2
Supply and fixing PVC rain water down fall pipes of 110 mm dia size 4 Kg/cm2 with necessary shoes, specials, clamps, bends, cowl, screws, nails, teakwood block, etc., complete complying with standard specification and as directed by the Departmental officers.
Rate for 1 RM/ One Floor
Supplying and fixing of rolling shutters with ISI mark shall be of pull and push type made out of 18/Gauge x3’’ lathe sections which consists of five main parts such as curtain, lock plate, guide channels rollers and hood cover. These five main parts are made out of special components detailed below; Curtain; Shall be of 18/Gx3' lath sections cut to required size and filled with heavy cast iron/ M.S. Clips for 8'0"[2.45m] high rolling shutter lathe sections provided shall be not less than 37 numbers. Lock Plate; Shall be 10gaue M.S.Sheet reinforced with 40mmx 6mm M.S angles at the bottom and fitted with heavy latches of 12mm thick locking arrangements on either sides. There should be one handle on either side Guide channel; Pressed guide channels shall be of 10 gauge M.S.Sheet and attached to the side brackets with 20mm square bar. Side brackets shall be of 10 Gauge angle M.S.Plate and cost iron 'U' clamps shall be reveted to the side brackets Roller; Shall be of heavy cast iron pullies fitted with heavy duty C' Class 40mm steel pipes and high tensile high carbon coil springs-2 springs shall be supplied. Supplying and fixing of Hood Cover; Shall be of 0.9mm CRCA sheet reinforced with 25mm x 25mm x 3mm M.S. angle or gate channel. The rolling shutter in addition to the above should have pulling hook and shall be coated with heavy coat of zinc chromite primer. The above specifications for various components of rolling shutter shall be invariably followed and verified with the rolling shutters supplied by the firms at site. If the rolling shutters supplied do not confirm to the above specifications, the concerned firms should be asked to replace the shutter or supply the missing components
Rolling shutter (18 gauge)
Gear Operated Type
Supplying mild steel grills for windows, ventilators, etc., including priming coat and labour charges for welding etc., complete
Petty Iron works for truss and grill gate, seating,straps including cost of steel and labour charges for welding etc., complete
Providing UPVC (Un-Plasticized Polyvinyl Chloride) Window Window: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mmx55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25x24x25mm steel reinforcement with a thickness of 1mm to have dimensional stablilty. The sash should be of 60x102mm. The mulilion should be of 60x74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass/6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.(PWD SOR 2023-24-page no-70-M0674)
Providing UPVC (Un-Plasticized Polyvinyl Chloride) Ventilator Ventilator: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mmx55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25x24x25mm steel reinforcement with a thickness of 1mm to have dimensional stablilty. The sash should be of 60x102mm. The mulilion should be of 60x74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass/6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.(PWD SOR 2023-24-page no-70-M0675)
Supplying and fixing Solid PVC door shutters using 19 guage 19mm M.S. square tubes for styles and outer PVC frames, 15mm M.S. tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for paneling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm.The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter solid panel PVC door with frame (PWD SOR 2023-24-page no-48-M0391)
Solid panel PVC door with frame
Supplying and fixing of PVC WATER TANK of best and approved quality with ISI specification and having inlet,outlet, overflow and clearing pipe arrangements and labour charges for fixing in position with all necessary accessories and transporting at site of work etc., complete complying as directed by the departmental officers.(pwd SOR-2023-24 page no-54 SI.NO-M0540)
2000 Litre
Supplying, laying and joining PVC pipes of approved quality and best variety conforming to ISS with ISI mark, of the following size above ground level up to 4 M hight laid properly to alignment including cutting, threading and fixing the required PVC specials but excluding the cost of such specials and fixing to the wall with necessary TW plugs, clamps and screws, making holes on the wall or drilling holes in the roof and making good dismantled portion to original condition with necessary brick work, concrete and plastering wherever necessary with necessary scaffolding charges etc., complete.
Supply and fixing in position best quality PVC Soil/ waste pipes of various size having ISI mark and providing leak proof joints including fixing to the wall with special PVC /MS clamps, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever necessary and making good the dismantled portion to the original condition, complying with standard specification etc., complete. - Below Ground Level
Supplying and fixing in position first quality and approved variety gun metal Gate valve (Heavy type)/ Wheel Valve (Heavy Duty) with ISI Mark of approved quality of the following dia including cost of shellac, thread, labour charges for cutting, threading, fixing in position etc., complete complying with standard specification and as directed by the Departmental Officer for both internal and external water supply arrangements.
Gate Valve
Supplying and fixing in position 15 mm dia Brass Chromium Plated Screw down tap (Heavy type) / Pillar tap / Stop Cock of approved make conforming to IS specification and quality including cost of shellac, thread, cutting and threading wherever necessary etc., complete complying with standard specification and as directed by the Departmental officers. (Taps should be got approved by the Executive Engineer before use on the works)
Pillar tap
Supplying and fixing in position mirror of size 600x450 mm / 500x400 and 5.5 mm thick of approved quality and brand of size with necessary plastic back, PVC frame with bottom stand of approved color with brass screws, rowel plugs etc., complete complying with standard specification and as directed by the Departmental officers. The quality of mirror should be got approved by the Executive Engineer before use on work.
Supplying and fixing CP/ Aluminium towel rail 600mm long and 20mm diameter with brackets of same materials including cost of teak wood plug and CP screws etc., complete complying with standard specification and as directed by the Departmental officers.
CP Rail
Supplying and fixing new one of best approved quality Porcelain soap tray of size 150 x 100 mm / Porcelain soap dish of size 150x150x 50mm including cost of rowel plug, brass screws etc., complete complying with standard specification and as directed by the Departmental officers.
CP Soap Tray 150 x 100
Supplying and fixing in position of the following dia PVC specials such as Bend, Tee, Y Junction, door etc.,of approved quality and variety of various size confirming to ISS and providing leak proof joint by PVC adhesive etc., including necessary cutting, threading and fixing and giving connection to PVC pipes etc., complete complying with standard specification and as directed by the Departmental Officer
Elbow - Pasting
Tee - Pasting
Supplying and fixing in position Cast Iron Nahini /Floor trap with Stainless steel grating /PVC nahini /Floor Trap with PVC Grating type of size 100x75/75x50 mm with best quality gratings of approved brand fixed over a bed of brick jelly lime concrete 1:2:5(One lime two sand and five aggregate) brick jelly 40mm and finishing with CM 1:3(One cement and three sand) including dismantling masonry wherever found necessary and making good to the original condition and giving connections to the cast iron pipes etc., complete complying with standard specification and as directed by the Departmental Officer
CI / Stainless Steel
Electrical Work
Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with switch box with 5A F.T. switch inflush with wall and covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for light point / Fan point (For electronic Regulator) (SD 2)
Wiring with 2x 1.5sqmm (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mmx 100mm x 75mm MS switch box for 5A 3 pin non interlocking flush type CS plug wfth painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open plug point (SD 10)
Wiring with 2x4sqmm (56/0.3mm) PVC insulated SC unsheathed Cu. Cable conductor cable of 1100V grade in suitable heavy gauge M.S.conduit pipe on wall and ceiling with M.S.accessories with 150mm x 100mm x 75mm MS switch box for 15A 3 pin non interlocking CS plug with painting of suitable colour,with continuous earthwire connection by 14 SWG TC wire for open power plug point. (SD 13)
Supply and run of 2 of 1.5 sq.mm(22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour. (SD 43)
Supply and Run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable heavy gauge M.S. conduit pipe concealed in wall and ceiling with continuous earth Wire connection by 14 SWG TC wire and making good of the concealed portion wiith suitable colour (SD 45)
Supply and run of 4 of 4sqmm (56/0.3)PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable Colour. (SD 50)
Supply and run of 4 of 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable colour (SD 63)
Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL. (SD 83)
Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting (SD 88)
Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 1 1 meter down rod on the existing clamp (SD 107)
Single Pole 6A to 32A, 10KA (pwd sor 2023-24 page no-141 sino-M1773)
Double Pole 6A to 32A, 10KA(pwd sor 2023-24 page no-141 sino-M1777)
Four Pole 63A, 10KA (pwd sor 2023-24 page no-142 sino-M1784)
32 Amps DP Switch with Metal Clad (Front Handle)(pwd sor -2023-24 page no-125 Sino-M-1364)
48W LED Street Light Fitting with LED(pwd sor-2023-24 page no-122 si no-M1291)
LANDSCAPE,GYM EQUIPMENT,CHILDREN PLAY EQUIPMENTS
Application of termite control and pest control for planting works etc., complete with all lead and as directed by the engineer-in charge (all labour, materials, tools and plants etc., by contractor)
Supplying and spreading of Vermicompost, neem cake for the planting including broadcasting etc., complete with all lead and lift and as directed by the engineer- incharge (All labour, materials, tools and plants etc., by contractor)
Supplying and filling of red soil for lawn area for plants including cost and conveyance of all materials to site including labour charge for all complete as per standard specification.
Supplying and planting of Mexican lawn in & australian dipling method etc., Complete with all laboour, lead and lift and as directed by the engineer-in charge. (All labour, materials, tools and plants etc., by contractor)
Providing following type of plants for park lawn area including finishing and labour charges cost and conveyance of all material at site etc., complete as per standard specification.
Flowering shrubs
Hedge plants
Speciman plants big
border plants
Areca plams
cycus
Ficus
Bismarikia nobalis
Eurporbia milli
Adeuium
Supplying and fixing of following children play equipment at park including cost and convence of all materials and labour charge etc., complete.
a)See Saw(4 seater)
b)Slide
C)Swing(2 seater)
Supply and fixing of granite garden bench including cost and conveyance of all materials to site and all labour charges etc complete
3 seater
Senior citizen / women exercise with floor plat form 2x2m finished ceramic tiles flooring
a)Hip twister double
c)Exercise Bicycle
VRV CONSTRUCTION
stage.html
html • 0.02 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .