CAMOUFLAGING TO OHT, SECURITY WALL ETC AT AF STATION UNDER GE (AF) SRINAGAR

Amount

M&L for Complete Removal of existing treatment from outer surface of overhead water tank of any capacity height up to 35 metre from ground by scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc and applying two coats of weather proof exterior emulsion paint over one coat primer in camouflage pattern as directed complete all as specified and directed by Engineer-in-charge. Make:- Asian - Apex or equivalent quality of Make Berger / Nerolac

M&L for Preparation of old decorated outer surface of overhead water tank of any capacity height up to 35 metre from ground including cornices, pilasters etc and applying two coat of white wash complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old painted steel surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint on overhead tank of any capacity height up to 35 metre complete all as specified and as directed by Engineer-in-Charge

Taking down cement or cement lime plaster on brick or stone walls or from Over Head Tank height up to 35 metre, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engineer-in-Charge

M & L for rendering 15 mm thick in CM 1:4 on brick masonry / concrete walls surface of Over Head Tank height up to 35 metre in patches and finished the surface even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of overhead water tank of any capacity height up to 35 metre from ground including cornices, pilasters etc and applying two coats of weather proof exterior emulsion paint over one coat primer in camouflage pattern as directed complete all as specified and directed by Engineer-in-charge. Make:- Asian - Apex or equivalent quality of Make Berger / Nerolac

Note for Item No 1 to 6:- Quoted rate shall be deem to include cost of scaffolding, safety arrangement for workers / labour and removal of scaffolding after completion of work.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engineer-in-Charge

M&L for 15mm thick rendering in cement mortar 1:4, on brick masonry or concrete surfaces of walls, finished even and smooth without using extra cement, all as specified.

M&L for Preparing new surface of wall and applying two coats of cement based paint, colour and tint as ordered, over one coat of Primer complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces of walls including cornices, pilasters etc and applying two coats of weather proof exterior emulsion paint over one coat primer complete all as specified and directed by Engineer-in-charge. Make:- Asian - Apex or equivalent quality of Make Berger / Nerolac

M&L for preparation of old painted steel and iron surfaces of any description exc 10cm width or girth by brooming down or steel wire brushing, scrapping down, smoke soot moulds, and greasy spots of roof / CGI Sheets, steel gates, steel doors, steel rolling shutters, steel eves boards etc, applying one coat of synthetic enamel paint in camouflage pattern as approved, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old wooden surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old wooden surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted steel surfaces of any description not other wise described over 10cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge

M&L for preparation of old painted steel surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

M&L for Complete Removal of existing treatment from wall including sides and soffits of the beams, ceilings, fascias, parapets etc by scraping down smoke soots, moulds, moss and trading oil and greasy spots etc and applying two coats of weather proof exterior emulsion paint over one coat primer complete all as specified and directed by Engineer-in-charge. Make:- Asian - Apex or equivalent quality of Make Berger / Nerolac

M&L for Complete Removal of existing treatment from wall including sides and soffits of the beams, ceilings, fascias, parapets etc by scraping down smoke soots, moulds, moss and trading oil and greasy spots etc and applying two coats of cement base paint, in camouflage pattern as approved, over one coat primer complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old decorated surfaces of walls, pillars, cornices by brooming down or steel brushing, scraping down smoke roots. moulds, moss and efflorescence salts, trading oil greasy spots etc. and applying one coat of cement base paint complete all as specified and as directed by Engineer-in-Charge

M&L for preparation of old decorated surfaces of walls, pillars, cornices by brooming down or steel brushing, scraping down smoke roots. moulds, moss and efflorescence salts, trading oil greasy spots etc. and applying two coats of cement base paint complete all as specified and as directed by Engineer-in-Charge

S&F in repair second class soft wood weather boarding, clean sawn, thickness 20 mm to 25 mm and rebated on thick edge to give 20 mm laps and fixed in eaves board etc up to 15 metres height, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-In-Charge.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge

S&F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275 complete.

All as per item No 23 but except Sheets using sheet retrieved vide item No 22 above.

S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

M&L for Preparing new zinc (or galvanised) surfaces to receive painting, by coating with mordant solution including washing and cleaning, etc steel and iron surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint in camouflage pattern as approved over one coat red oxide primer complete all as specified and directed by Engineer-in-Charge

M&L for complete removal of existing treatment from concrete / plastered surface of road side Kerb including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat primer complete all as specified and directed by Engineer-in-charge.

FG CONSTRUCTION

M/S LUCKY BUILDERS

NAJAR ENTERPRISES

M/S Thakur & Sons

M/S FAROOQ AND SONS

M/S WANI AND SONS