Repair of 8x1000 MT godown replacement of profile sheet and construction of new office room at Nagenpali

Brick work with Fly ash bricks 23cm x 11cm x 8cm size having crusing strength not less then 35Kg/cm2 in cement mortar (1:6) in foundation & plinth ,super structure/ cum.

Foundation & plinth

Above 3mtr hieght

R.C.C work of M-20 grade with 20mm & down grade BHG C/B chips including hoisting, laying & all cost, conveyance, royalty & taxes etc. comp. to work site as per the specification approved by the deptt. & direction of EIC.

Plinth Band

Lintel band

Col & beam

RCC Roof Slab, Landing ,Balcony,Sunshade & chajja

Providing M.S reinforcement for RCC work including cutting, bendind,binding & tying the grills and placing in position including cost of binding wire 18 to 20 gauge as per drawing & technical specification.

Providing and laying 20mm thick grading plaster in cement mortar(1:4) with water proof cement compound with curing etc. all complete.

12mm thick cement plaster (1:6) on brick work including all cost conveyance royalty & taxes etc. comp. to work site per 1sqm.

Up to 3mtr height

Above 3mtr hieght

16mm thick cement plaster (1:6) on brick work including all cost conveyance royalty & taxes etc. comp. to work site per 1sqm.

Up to 3mtr height

Above 3mtr hieght

Finishing wall surface of walls with cement based wall putty (water based) of approved make & finished smooth & even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc. complete.

Wall painting two coats with plastic emulation paint of approved shade on new work to give an even shade including cost of paint per sqm.

Painting two coats with approved shade of weather coat to outside wall surfaces.

Upto 3mtr height

Above 3mtr height

Painting 2 coat with approved enamel paint on new wood work or iron work over a coat of primer.

Ground floor

1st floor

Supplying, fitting & fixing vetrifed tile in floors of size 600mm x 600mm of approved make conforming to IS: 13755 laid on 20mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of EIC.Data for 10 sqm, vide page - 235 of A/R - 2006, item - 1,in other building items chapter.(for new work only)

Fixing tiles/marble tiles in floors trades or steps and landing on 25mm bed of cement mortar 1:1 jointed with neat cement slury mixed with pigment to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles.

Fixing glazed wall tiles of size 20cm x 30cm in floors, treads on steps and landing on 25mm thick bed of cement mortar 1:1 joined with neat cement slurry mixed with pigment to match the shade of the tiles incl. rubbing & polishing complete incl cost of glazed tiles.

Cost, supplying ,fitting &fixing of bathroom fibre door of approved make including fibre choukatha all GI fittings all cost ,conveyance taxes etc. complete.(M.R.)

Manufacturing supplying and labour charges for fitting and fixing in position of M.S. grills as per approved design with one coat of anti-corrosive painting & making good to the damages of walls or R.C.C. or other structurals complete including mending or cutting sizes or grooves with cost and conveyance of all materials and labour with T&P required for the work, taxes and royalties etc. complete.(M.R.)

Cost,supplying ,fitting &fixing of pre-cast concrete ventilators of size 0.38 m x0.25 m. (M.R.)

Supplying, fitting, fixing up window (sliding type) made up aluminium section 9778 as windows frame, section No 4095,4096 and 9777,3994 as shutter frame with 5mm thick black glass as penal fitted with rubber beading including locking arrangement including all fitting, cost of materials all taxes etc. complete as per direction of EIC.

Supplying, fitting, fixing of Aluminum door with OEL anodized Al. door section of 9202 as vertical member and, 9201as top member and 9200 as bottom & middle member & 9mm thick pre laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle no. 1855 including all cost of labour, T&P, hire charges of drilling machine, etc. complete as per direction of EIC.

Antitermite treatment chemical emulsion IMIDACLOPRID 30.5 SC including all cost etc complete.

Cement punning including cost & conveyance of cement per sqm.

Removing old cement plaster from wall including racking out joints 12mm deep & removing the debris with in 50mt lead

Dismantling and removing 2.5 cm thick A.S flooring including stacking the useful materials for reuse and removing the debris within 50m lead

Cement conctrete blocks machine mixed and hydraulic compressed having crushing strength not less than 75 kg./cm2 pitching on edge including filling the interstices with sand or sandy soil including all cost conveyance etc. Complete.

Providing fitting,fixing of barbed wire fencing with post by means of staples & straining hooks by means of tying with GI wire including cost of staples ,hooks and tying wires including all labour ,cost ,conveyance &taxes etc. complete but excluding cost of angular post.

C.C (1:2:4)with 12mm size HG chips including all cost, conveyance,royalty & taxes etc.comp.to work site as per the specification approved by the department & direction of E.I.C.

Finishing walls with water proofing cement paint of approved shade on new work Two coat to give an even shade per 1sqm.

Above 3mtr height

Supplying & painting coal tar based Epoxy Shalipoxy CTE HB in two coats over floor & wall per sqm.

Neutralization of outside & inside surfaces with 10% HCL solution, soaking & cheking for residuals, water wash & soaking again of the brick works complete in all respect. (As per market Rate)

Dismantling G.C.I or A.C sheet roofing after carefully removing nut & bolt including stacking of materials for re-use & removing the debris.

Dismantling brick or stone masonary in lime or stone mortar above 3mt height including stacking the useful materials for re-use & removing the debris.

Supplying, fitting and fixing of precoated Galvanized iron profile sheet semi gloss of total coated thickness 0.5 mm in roof drilling hole in wind ties including fixing of ridges valleys, wind ties including fixing of ridges valleys,wind ties etc. complete including cost of sheet and all fitting,all taxes labour,T&P etc.complete as per direction of Engineer-in-charge.