Material and labour for Construction of 6590 Mtr Fd Security Fence (Chain Link) in Ferozepur

S&F Structural steel post of angle iron 65x65x5mm, 4.80 Mtr long, weight as per IS 2062-1984 including febrication of 0.75 Mtr long top portion for swan neck at 30 degree to vertical, including making six round holes of 15 mm dia on vertical posts and for fixing of nuts and bolts and three Nos of 15 mm dia holes for fixing strut and five Nos notches on the swan neck and welding of two Nos of 16 mm MS rod each of 0.23 mtr length to bottom end of picket for anchorage including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above GL complete and two coat of bituminous paint embeded portion of angle 0.45mtr.. Make : Jindal/ SAIL/ TATA/Equivalent ISI Marked Make : Jindal/ SAIL/ TATA/Equivalent ISI Marked Drg no-01

S&F Structural steel post of angle iron 65x65x5mm, 3.30 Mtr long, weight as per IS 2065-1984+B12, including febrication for strut post bending at top portion, including making three Nos holes of 15 mm dia on vertical posts for fixing of nuts and bolts and three Nos of 15 mm dia including 0.23 mtr 16 mm dia MS rod two piece to be welded at bottom for anchoring purpose including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above GL complete and two coat of bituminous paint for stud 0.45mtr below GL for one side of the post. Make : Jindal/ SAIL/ TATA/Equivalent ISI Marked Drg no-01

S&FGalvanised two strand steel barbed wire (line wire) 2500 RM of 2.24mm diameter of wire, barb at 75mm spacing. The barbs are (point wire) 02mm thick wire shall be ISI marked as per IS:278 of 1978 (Third revision) with amdt No 1 to 4. The points of barbs shall be sharp. The line and point wires shall be circular in section free from scales and point wires shall be circular in section free from scales and defects and shall be uniformity Galvalium. The barbed wire shall be manufactured as per clause 11.2.1 and 11.2.2 respectively of IS specification cited above read with IS 4826/79 (first revision) 37.00 Kg per boundle.

S&FGalvanised steel chain link fence fabric of mesh size 125 mm x125mm (+/-) 4mm of nominal diameter. The size of chain link fence febric shall be 2.4 mtr x 15 mtr mesh wire. Galvalium chain link shall be manufacture as per IS 4823.

S&F Concertina Coil. Punched Tape Concertina Coil - 1A shall confirm to CQA(EE), Pune specification No. CQAE/5660/1602/a(including spike and handle) with dimensions as follows:- Dia of coil when closed :1050mm (+50mm-0.00mm), dia of coil when opened 915mm (+50mm -0.00mm), wt of one coil : 15.2 Kg (+5% & -5 %)without packing material and coil wound with bituminized hessian cloth for providing protective coating as per standard specification.Punched tape concentrina coil shall have a core wire of high carbon spring steel of high tensile strength not less than 1620 N/Sq mm. The punched tape and core wire are to be electro galvanised to provide protection against outdoor exposure with minimum zinc coating of 230 gm /sq m. The punched tape should be mechanically crimped over the core wire forming into a coil . Provn of steel clips to connect the individual turns of the coil to each other for to opens like an accordion. The width of strip shall be 19mm and spacing of clips shall be 23.5mm to 24.5mm C/C.Each coil to be standered up to 12.50mtr.Drgno-01

S&FMS flat of 40x3 mm, 2.70 mtr long with 6 holes of 15 mm dia, including one coat of red oxide primer and two coats of synthetic enamel paint. 3.02 Kg per flat. Make of steel: Jindal/ SAIL/ TATA/Equivalent ISI MarkedDrgno-01

S&FMild steel bolts with hexagonal head at one end and screwed the other end fitted with one nut and two washers, The bolt shall be 12mm dia and 50mm long.

S&FMS round bars 10mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer.

S&FSteel Main Gate. Steel gate 5.5 mtr wide with 02 Nos of Gate pillar made of RCC of size 500x400mm complete all as directed (Alongwith reinforcement).

S&F Wicket Gate. Steel gate 1.2mtr wide with 02 Nos of Gate Pillar made of RCC of Size 300x200mm complete all as directed ( Alongwith reinforcement).