Construction Of 06 Roomed Double Storey Building For Govt.LHS Nowgham

Amount

Dismentilling roofing including ridge,rafter,velly and shutters and stacking of material within 50 mtr lead of G.S Sheets (including all lead lift and carriages if any)

Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead :Of sectional area 40 sqcm. and above.(including all lead lift and carriages if any)

Dismentlling of stone rubble masonery including stacking of steel and disposal of un serviceable material with in 50 mtr lead.(including all lead lift and carriages if any)

Dismentling of door and windows and cleastory window (steel and wooden) shutters including chowckat,rafter etc complete and stacking within 50 mtr lead(including all lead lift and carriages if any)

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 1 Osqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in:All kinds of soil (including all lead lift and carriages if any)

Earth work in excavation by manual means over areas exceeding 30 cms & upto 5 m in depth 1.5m in width as well as 10 sqm. On plan, disposal of excavated earth upto 1 m, disposed earth to be levelled & neatly dressed( all kinds of soils)(including all lead lift and carriages if any)

Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 40mm nominal size crushed stone agg.)(including all lead lift and carriages if any)

P/L in position specified grade of reinforced cement cencrete excld. The cost of centring, shuttering, finishing and reinforecement-All work upto plinth level. 1:1.5:3 graded stone agg. 20mm nominal size (including all lead lift and carriages if any)

RCC work in walls, incld. attchd pilasters, buttresses plinth & string courses, columns, pilars, abts, posts and sturts etc upto floor 5 level excld. Cost of cntring, shuttering, finishing and reinforcement 1:1.5:3 graded crshd stne agg. 20mm nominal size(including all lead lift and carriages if any)

Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:3:6 coarse sand 20mm nominal size crushed stone agg.) WITH 20 % BOULDER (including all lead lift and carriages if any)

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns (including all lead lift and carriages if any)

Centering and shuttering including strutting, propping etc. and removal of form work for Columns, piers, abutments, pillars, posts and struts (including all lead lift and carriages if any)

Brick work with FPS bricks of class designation 75 in foundtion & plinth in cement mortar 1:6 (1 cement, 6 coarse sand) I including Extra for brick work in superstructure above plinth level upto floor V level. (By manual means) (including all lead lift and carriages if any)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class kail wood (including all lead lift and carriages if any)

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge 2nd class kail wood 35mm thick (including all lead lift and carriages if any)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. coir veneer board )12mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked (including all lead lift and carriages if any)

Providing and fixing35 mm wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge 2nd class Kail wood (including all lead lift and carriages if any)

Providing & fixing of 40x5mm flat iron hold fast 40cm long including fixing to frameswith 10mm dia bolts nuts &wooden plugs and embedding in cement conc block 30x10x5cm 1:3:6mix (1cement:3coarse sand:6 graded st agg)20mm nominal size (including all lead lift and carriages if any)

15mm Cement Plaster on the rough side of single or half brick wall of mix 1:6(1 cement:6 fine sand) (including all lead lift and carriages if any)

12 mm cement plaster 0n wall of mix 1:6 ( 1 cement 6 fine sand )Inside GF & Ist Floor (including all lead lift and carriages if any)

6mm cement plaster to ceiling of mix 1 : 3 (1 cement: 3 fine sand) (including all lead lift and carriages if any)

Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete. (including all lead lift and carriages if any)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm ( double charge)(including all lead lift and carriages if any)

Extra for providing glass panes 4 mm thick )instead of ordinary glass panes13.75kg/sqm in doors windows and clerestory window shutters (Area of opening for glass panes excld portion inside shall be measured) (including all lead lift and carriages if any)

Providing and applying wall putty of 2mm thick over plaster surface (internal only) (including all lead lift and carriages if any)

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) (including all lead lift and carriages if any)

Distempring with oil bound washable distemper of approved brand & manufacture to give an even shade New work (2 or more coats)over and incld. Priming coat with cement primer (including all lead lift and carriages if any)

Applying priming coat with ready mixed Pink or grey primer of approved brand and manufacture on WOOD work (hard or soft wood) (including all lead lift and carriages if any)

Painting with synthetic enamel paint of app. Brand & manufacture to give an even shade 2 or more coats on new work (including all lead lift and carriages if any)

Providing wood work in false ceiling, partitions etc sawn & putup in position budloo/ Fir wood (including all lead lift and carriages if any)

Providing and fixing 12mm mm thick flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid separately) : (including all lead lift and carriages if any)

Reinforcement for RCC work incld straightning, cutting, bending, placing in position & binding all complete (Thermo-mechanically treated bars) (including all lead lift and carriages if any)

Structural steel welded in built up sections trusses,soffits,Eaves Boarding and framed work incld cutting hoisting fixing in positon and applying a priminng coat of approved steel primer all complete (including all lead lift and carriages if any)

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required.0.63mm thick with zinc coating not less than 27 5gm/m2 (including all lead lift and carriages if any)

Providing ridges of hips of width 60cm overall width coloured GS sheets fixed with polymer coated J or L hooks bolts & nuts 8mm dia GI limpet & bitumen washers complete 0.63mm thick with zinc coating not less than 275g/sqm (including all lead lift and carriages if any)

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete 250x16 mm (including all lead lift and carriages if any)

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :100x10mm (including all lead lift and carriages if any)

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm (including all lead lift and carriages if any)

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm (including all lead lift and carriages if any)

Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :Single rubber stopper (including all lead lift and carriages if any)

Providing and fixing bright finished brass hard drawn hooks and eyes 100mm(including all lead lift and carriages if any)

Providing and fixing M.S. grills of required pattern in frames of windows etc.with M.S. flats, square or round bars etc including priming coat with approvedsteel primer all complete.Fixed to openings / wooden frames with rawl plugs screws etc. (including all lead lift and carriages if any)

Electric wiring with 1.5sq mm copper cabble including 20mm dia 2mm thick PVC pipe 5amp switch sukan box and connection to the main pole complete as directed by engineer in charge (including all lead lift and carriages if any)

Making plinth protection50 mm thick of cement concrete 1:3:6 with 20 mm nominal size aggrigates over 75 mm bed of dry brick ballast 40 mm nominal size well rammed, consolidated & grouted with the fine sand i/c finishing the top smooth (including all lead lift and carriages if any)

sh. Bashir Ahmed Wani

M/S SHAH NAWAZ

M/s Mir and Co

Mohd Arshad Beigh

Mohd Azam

Saima Majeed W/o Kaiser Mir

NAZIR AHMED WANI

Choor Singh

MANZOOR AHMED WANI

M/S MHM CONSTRUCTIONS PROPRIETOR SH MUDDASAR HAMID MALIK

mohammad yousuf shah