Special repair by providing renovation repair of existing structure converted into ICU at Civil Hospital B.K Hospital Faridabad Civil and P.H

Amount

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead), For thickness of tiles 10mm to 25mm [HSR 5.43.1]

Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion, (i)Single socketed pipes.110mm diameter [HSR 9.57.2]

Providing and fixing on wall face Unplasticised – PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming toIS : 13592 Type A, including jointing with seal ring conforming toIS : 5382, leaving 10mm gap for thermalexpansion – 110mm bend [HSR 9.58.5.2]

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ≥85%, Thermal Conductivity k = 0.052 – 0.057 w/m K, Fire Performance as per (BS 476 pt – 6&7) in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanizediron section of 0.33mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200mm and secondary intermediate cross T of size 15x32 mm of length 600 mm toform grid module of (galvanized @80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2mm, spaced at 1200mm centre to centre along main ‘T’. The system should rest on periphery walls/partitions with the help of GI perimeter wall angle of size 24x24x3000mm made of 0.40mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450mm centre to centre & 40mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyster baked paint, for all height. The work shall be carried outas per specifications, drawings and as per directions of the engineer-in-charge with 16mm thick bevelled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6 (HSR 32.47.1).

Providing and fixing of P.V.C. sheet flexible type conforming to I.S. 3462-1966 flooring plain coloured marble or mottled finish on a smooth damp proof base laid with adhesive recommended by manufacturer including pressing the sheet with a suitable tool to get a smooth surface all complete as directed by the Engineer-in-Charge. 3.00 mm thick (HSR 10.82.4)

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, ottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement ortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete (HSR 10.58)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacture, over the palstered wall surface to prepare the surface even and smooth complete (HSR 11.60)

Wall painting with (bio grade) plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) Generally used in hospital buildings etc. complete as per specifications (HSR 11.123)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: water thinnable cement primer (HSR 11.67.1)

Providing and fixing aluminium work of doors, windows, ventilators and partitions with extruded built up standard tubuler sections/ appropriate Z sections and other sections of approved make confirming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling C.P brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron) [HSR 12.157.1.2]

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) –Powder coated aluminium (minimum thickness of powder coating 50 micron) (HSR 12.157.2.2)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade I type II, in paneling fixed in aluminium doors, windows shutters and partition frames with C.P brass/ stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-Charge. Pre-laminated particle board with decorative lamination on both sides [HSR 12.158.2]

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-Charge. (Coat of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 Kg/ Sqm) [HSR 12.159.2]

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body/ plate with double spring echanism and door weight upto 125 Kg for doors, including cost of cutting floors, embedding floors as required and making good the same matching to the existing floor finishing and cover lates with brass pivot and single piece M.S sheet outer box with side plate etc. complete as per the direction of Engineer-in-Charge with brass cobver plate minimum 1.25 mm thickness [HSR: 12.160.2]

Providing and fixing hospital certain track including ceiling clamp, wall clamp, Band and brackets etc. complete in all respect as per the direction of Engineer-in-Charge [NS]

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and confirming to IS: 15622, of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/ Sqm including grouting the joint with white cement and matching pigments etc. complete Size of tile 600 x 600 mm [HSR 10.63.2]

Providing and laying rectified Glazed Ceramic floor of size 300 x 300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make, in colours, white, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 Coarse Sand), jointing with grey cement slurry @ 3.3 Kg/ Sqm including grouting the joints with white cement and matching pigments etc., complete [HSR 10.60]

Providing and fixing white vitreous chinaware pedestal type water closet (European type W.C pan) with seat and lid, 10 litre low level white P.V.C lushing cistern, including flush pipe, with annually controlled device (handle lever), confirming to IS : 7231, with all fitting and fixtures complete, including cutting and making good the walls and floors wherever required. W.C pan with ISI marked white solid plastic seat and lid [22.23.1]

Providing and fixing G.I inlet connection for flush pipe connecting with W.C pan [HSR 22.35]]

Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-Charge [HSR 22.15]

Providing and fixing CP Brass single lever telephonic wall mixer of quality & make as approved by Engineer-in-Charge 15mm nominal dia [HSR 22.12.1]

White vitreous chinaware Surgeon type wash basin of size 660 x 460 mm with a pair of 15 mm C.P brass pillar taps with elbow including operated levers [HSR 22.1.8]

Providing and fixing toilet paper holder:- C.P Brass [HSR 22.42.1]

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & Cold water supply, including all CPVC Plain & brass threaded fitting, i/c fixing the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. [HSR 22.86] (i) 15mm nominal outer dia pipes [22.86.1]

20 mm nominal outer dia pipes [22.86.2]

Providing and fixing Unplasticised PVC connection pipe with brass unions [HSR 22.101.2.1] 45 cm length 15 mm nominal bore

Providing and fixing C.P Brass bib cock of approved quality conforming to IS: 8931:15 mm nominal bore [HSR 22.104.1]

Providing and fixing C.P brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms 15 mm nominal bore [HSR 22.106.1]

Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931:- 15 mm nominal bore [HSR 22.108.1]

Providing make and utility as per direction of Engineer-in--Charge [HSR 22.109]

Amarjeet Contractor

S & T CONSTRUCTIONS