REPAIR AND MAINTENANCE OF SECURITY LIGHTS, SOLAR WATER HEATER, SOLAR STREET LIGHTS, LIGHTING CONDUCTOR AND LT ELECTRIC SUPPLY NETWORK ALONGWITH CONNECTED MISC ITEMS AT MIL STN KALKA UNDER GE (I) JUTOGH

Amount

Excavation in trenches in soft/ loose soil not exc 1.5 m deep and n.exc 1.5 mtr wide for laying of cable,etc. and getting out complete all as specified and directed.

Excavation in trenches exceeding 1.5m depth and not exc. 3.0m wide and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in earth including spreading leveling and well ramming excavated soil in layer not exceeding 25 cm thick each layer, back in trenches after cable have been laid & tested,poles,stairs,struts have been erected & tested complete all as specified and directed.

Removing of surplus soil (soft/loose) obtained from excavation to a distance not exc 50 metre and depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified and directed.

M&L dry and clean fine sand for cable cushioning for cable protection complete all as specified and directed. Note : Punned down thickness shall be measured.

Supply and laying well burnt old size sub class 'B' bricks laid in trenches for cable protection, complete all as specified and directed.

M&L for PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in foundation for stay set /Pole/ FPB etc including fair finish even and fair to exposed surfaces without using extra cement complete all as specified and directed.

M&L for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in foundation for stay set /Pole/ FPB etc including fair finish even and fair to exposed surfaces without using extra cement complete all as specified and directed.

M&L for PCC 1:2:4, type B-1, using 20 mm graded crushed stone aggregate as in foundation of electric poles/struts/ etc including necessary form work, fair finished surfaces without using extra cement complete all as specified and directed.

S&F steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws asspecified type 410 SP-31 (9.00 metres long) complete all as specifed and directed. Note : Excavation & earth work shall be measured separately.

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specifed and directed.

S&F in repair LT cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm 4 core, complete all as specified and directed

S&F fully integrated all in one Automatic light (Inbuilt Mono/poly crystalline panel SPV module 40 Wp and inbuilt LiFePO 4 battery ) Luminaire wattage 12 watt, system voltage 12 volts, Lumen per watt >125 , battery type LiFePO04 ( 12.8 V & 12/14 AH), IP66, colour temperature 6000K-6500K, incl taking down old unser and complete fixing and connection complete all as specified and directed. Model No AIO-12 of Systellar or Certified by govt approved lab.

S&F in repair KIOSK Junction box weather proof made out of PVC make Sintex cat pat no GSJB 3020 or equivalent in FINOLEX/UNIVERSAL Switch gear/ Sintex and including made out of one piece mounted SMC base and door pole mounted hinged door size 300 x 200 x 105mm inside dimension comprising of aluminum bus bar 4 strips for 3 phase and neutral and 6 Amp MCB for controlling the street light fitting including MS clamps 30 x 4 mm with necessary MS nuts bolts and washer complete all as specified and directed

S&F in repair 3 core 1.5 sqmm PVC insulated and FR PVC round sheathed copper conductor flexible 1100 volts for connection from cable Junction Box to street light fittings including proper clamping for conductor complete all as specified and directed.

S&F GI pipe bracket for street light fittings made out of 40 mm dia GI pipe medium grade 1.2/0.9 mtr long bent to required angle/shape with and 2xpair of MS clamps made out 40mmx5mm MS flat iron bolts,nuts complete including two coat of synthetic enamel paint (first grade) over a coat of red oxide complete all as specified and directed.

S&F Automatic operation Astronomical street light timing switch having lighting control (ON-OFF) through Astronomical Calculation of Sun rise/sun set by setting date, time and degree of longitude and latitude without separate light sensors and pre-wired with suitable size copper conductor single core PVC sheathed cable and all mechanism fitted into LT feeder pillar box (KIOSK) outdoor type, pole mounted. The panel shall be dust and vernin proof, made of CRCA MS sheet fixed with 25mm X 4mm thick MS flate iron strip complete with nuts, bolts & washwers, duly powder coated finish. Front opening type with locking arrangement complete all as specified and directed suitable for three phase and neutral with under and over voltage protection relay, contactor 65A/63A TP, MCB 63A TPN, 415 volts, 50 Hz, AC supply system, complete all as specified and directed

M&L for painting and numbering to steel tubular pole of any size with two coats aluminium paint over a coat of red oxide primer including preparation of old painted surface scrubbing by wire brush complete all as specified and directed

M&L Painting of PCC pole upto 1.5 mtr height from PCC, of synthetic enamel paint with black and white strips and including wiriting pole No complete all as specified and directed.

S&F single pointed air termination aluminium rod, 12 mm dia, 300 mm long, complete all as specified and directed

S&F aluminium strip 25mm x 3.15mm complete with saddle and fixing screws for fitting the strip, complete all as specified and directed

S&F Galvanised iron strip 32 x6mm complete with saddle and fixing screws for fitting the strip, complete all as specified and directed

M&L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexagonal Head screw, complete all as specified and directed

M&L for earthing complete with galvanised copper plate electrode 60x60x3.15mm thick,buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level,connected to galvanised earth copper strip 32x6mm dia by means of bolts,nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 connected to earthing test point all as specified or indicated including testing on completion all as shown in Electrical Plate No 3 of MES Schedule Part I and testing complete all as specified and directed.

M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in block (300x300x300mm) for holding GI pipe post for air terminal rod including necessary form work etc complete all as specified and directed.

S&F in repair GI pipe light grade 40mm nominal bore with all fittings fixed as termination postal ,fixed to poles/ walls/ under floors/ under road etc. complete all as specified and directed.

Taking down/out unserviceable UG cables of any cross sectional area and connections including Bricks, GI Pipes, etc of any descriptions, laid in trenches and/or fixing with walls/poles including segregating of serviceable materials viz Bricks, cables, GI Pipes etc complete all as specefied and directed.

Supply, laying , jointing and testing of cable XLPE insulated, screened, PVC bedded ,galvanized steel strip or wire armoured heavy duty electric cable with multistranded aluminium conductor, 1100 volts grade, laid in trenches or duct or passing through pipe or fixed to poles walls of size 240 Sqmm 3.5 core confirming to IS : 7098-1985 laid in trenches,under road or passing through pipes/ducts or fixed to walls/poles complete with proper thimbles complete all as specified and directed.

Supply, laying , jointing and testing of cable XLPE insulated, screened, PVC bedded ,galvanized steel strip or wire armoured heavy duty electric cable with multistranded aluminium conductor, 1100 volts grade, laid in trenches or duct or passing through pipe or fixed to poles walls of size 185 Sqmm 3.5 core confirming to IS : 7098-1985 laid in trenches,under road or passing through pipes/ducts or fixed to walls/poles complete with proper thimbles all as specified and directed.

Supply, laying , jointing and testing of cable XLPE insulated, screened, PVC bedded ,galvanized steel strip or wire armoured heavy duty electric cable with multistranded aluminium conductor, 1100 volts grade, laid in trenches or duct or passing through pipe or fixed to poles walls of size 70 Sqmm 3.5 core confirming to IS : 7098-1985 laid in trenches,under road or passing through pipes/ducts or fixed to walls/poles complete with proper thimbles all as specified and directed.

Supply, laying , jointing and testing of cable XLPE insulated, screened, PVC bedded ,galvanized steel strip or wire armoured heavy duty electric cable with multistranded aluminium conductor, 1100 volts grade, laid in trenches or duct or passing through pipe or fixed to poles walls of size 25 Sqmm 4 core confirming to IS : 7098-1985 laid in trenches,under road or passing through pipes/ducts or fixed to walls/poles complete with proper thimbles all as specified and directed.

Supply, laying , jointing and testing of cable XLPE insulated, screened, PVC bedded ,galvanized steel strip or wire armoured heavy duty electric cable with multistranded aluminium conductor, 1100 volts grade, laid in trenches or duct or passing through pipe or fixed to poles walls of size 16 Sqmm 4 core confirming to IS : 7098-1985 laid in trenches,under road or passing through pipes/ducts or fixed to walls/poles complete with proper thimbles all as specified and directed. Note for Item No 29 to 33 : Road crossing and making good to the disturbed road by suitable PCC work is included in the unit rate quoted against each item.

S&F in repair 1100 volts grade heavy duty 10 Sq mm two core service cable PVC insulated aluminium Stranded conductor, served with inner shething of PVC sheathed in service conections suspended by insulating hangers and procelean beat not more than I metre apart including 4Sq mm suspension wire, one twin core cable flat or circular, complete all as specified and directed.

S&F in repair 1100 volts grade heavy duty 16 Sq mm two core service cable PVC insulated aluminium Stranded conductor, served with inner shething of PVC sheathed in service conections suspended by insulating hangers and procelean beat not more than I metre apart including 4Sq mm suspension wire, one twin core cable flat or circular, complete all as specified and directed.

S&F in repair for GI pipe light grade of size 80mm dia laying in trenches/ under floor/on walls for protection of UG cables complete all as specified and directed

S&F in repair for GI pipe light grade of size 50mm dia laying in trenches/ under floor/on Poles for protection of UG cables with and 2xpair of MS clamps made out 40mmx5mm MS flat iron bolts,nuts to be fitted on pole (Only) complete including two coat of synthetic enamel paint (first grade) over a coat of red oxide on clamp complete all as specified and directed

S&F in repair for GI pipe light grade of size 40mm dia laying in trenches/ under floor/on Poles for protection of UG cables with and 2xpair of MS clamps made out 40mmx5mm MS flat iron bolts,nuts to be fitted on pole (Only) complete including two coat of synthetic enamel paint (first grade) over a coat of red oxide on clamp complete all as specified and directed

S&F in repair MCCB (Thermal Magnetic) Release, Adjustable Overload 80-100%, 4 pole ,415 volt,100 amps, 25kA breaking capacity complete all as specified and directed.

S&F in repair MCCB, 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA, AC, 50 Hz, complete all as specified and directed.

S&F in repair MCCB, 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA, AC, 50 Hz, complete all as specified and directed.

S&F in repair MCCB, 4 Pole, 415 V, Adjustable type, 400 Amps with breaking capacity 36 KA, AC, 50 Hz, complete all as specified and directed. Note for Item No 39 to 42: If any MCCB burns or became UNSV during defect liability period, then it should be replaced by the contractor with the same make and of with same capacity.

S&F in repair of Outdoor type LT Panel/ Feeder pillar by relacement of Front & Rear doors/ shutters, Made out of CRCA Sheet 3.15 mm thickness with necessary fabrication work like replacement of hinges,locking knob Bending,welding required at site, complete all as specified and directed.

M&L for painting of LT Panel complete with two coats of synthetic Enamel paints over a coat of red oxide as per required at site complete all as specified and directed.

S&F in replacement of Indicator Lamp (RYB) complete all as specified and directed.

S&F in repair LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specifed and directed.

S&F in repair LED Post top 20 watt decorative type,made of cast aluminium with decoratice opal polycarbonate diffusar with IP-65 protection including fixing with suitable size GI pipe as required on the top of gate pillar including all fixing accessories complete all as specified and directed.

M&L for meggering of cable including cable jointing kit of 1.1 KV (LT) grade for Heat-shrinkabIe straight through/ End Joint after disconnecting from LT Pole/panel as directed,and finding out fault including required earth work, cutting of cable and preparation for jointing of defective portion of cable complete with jointing material and accessories suitable for PVC/XLPE armored aluminum stranded conductor cable of size 50/70/95 sq mm 3.5 core complete all as specified and directed

All as per Srl item No 48.00 above but of size 185 to 240 sqmm, complete all as specified and directed.

S&F Aluminium thimble/sleeve of 25 Sqmm complete all as specified and directed.

S&F Aluminium thimble of 50 Sqmm complete all as specified and directed.

S&F Aluminium thimble of 95 Sqmm complete all as specified and directed.

S&F Anchor Fastener 6mm/ 8mm of length 3'' for clamping of electrical items complete all as specified and directed.

S&F in repair 1.5 Sqmm (Nominal area) FRLS-H PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor complete all as specified and directed.

S&F in repair 2.5 Sqmm (Nominal area) FRLS-H PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor complete all as specified and directed.

S&F in repair 6.0 Sqmm (Nominal area) FRLS-H PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor complete all as specified and directed.

S&F in repair busbar chamber TPN-Type (Al.Busbar) in sheet metal enclosure having 200A TPN BBC (Al.) with 4 o/g ways & IP 42 Protection complete all as specified and directed.

M&L for pruning of tree branches of any size /dia from LT/HT overhead line up to a minimum clearance of 2.5 mtr from over head conductor incl T &P and transportation for disposal complete all as specified and directed.

S&F in replacement LT line poly proplain composite phase separators moulded type suitable for horizontal/vertical 4 lines LT overhead lines complete all as specified and directed.

S&F Heat Shrinkable sleeve for electrcal insulation of LT Cable, suitable for 16 to 95 Sqmm LT Cable size as per reqd colour complete all as specified and directed.

M&L for Rubber mat of Dimension 1m x 2m and 3 mm thick complete for Electrical installation and Main Panels complete all as specified and directed.

M&L for broken stone or boulder hard core of gauge n.exc. 63mm deposited spread and leveled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for PCC 1:1.5:3, type A-1, using 20mm graded course aggregate as in top gap filing of road/path etc complete all as specified and directed.

R. P. Suppliers and Construction Co. (BID ID -3083184)

M/S Sonu Traders (BID ID -3080207)