REPAIR PAINTING AND POLISHING TO STEEL AND WOODEN FURNITURE UNDER GE DAMAN AT WORLI

Amount

Removing of unserviceable/broken wooden members of chair dining and supply and fixing new members/parts of sizes mentioned in Drg, made out of first classs hard wood (Indian Teak wood) fixing of joints with glue and bamboo pins all as per drawing No FD-228/16/279 / FD/MAP-II/05 and as specified and directed for Front leg with suitable PVC Shoe

-Ditto- all as per Ser No 1 but for Rear leg with suitable PVC shoe

-Ditto- all as per Ser No 1 but for front leg with suitable PVC shoe

-Ditto- all as per Ser No 1 but for Side rails

-Ditto- all as per Ser No 1 but for Front Rail

-Ditto- all as per Ser No 1 but for Rear Rail

-Ditto- all as per Ser No 1 but for Back patti

-Ditto- all as per Ser No 1 but for Stiffner

-Ditto- all as per Ser No 1 but for chair easy drawing No FD-229/17 and for Front leg with suitable PVC shoes.

-Ditto- all as per Ser No 1 but for chair easy drawing No FD-229/17 and Rear leg with suitable PVC shoe

-Ditto- all as per Ser No 1 but for chair easy drawing No FD-229/17 and for Arms rest

-Ditto- all as per Ser No 1 but for chair easy drawing No FD-229/17 and for Front / Rear Frame of seat / back

-Ditto- all as per Ser No 1 but for chair easy drawing No FD-229/17 and for Side Frame of seat / back

-Ditto- all as per Ser No 1 but for chair easy drawing No FD-229/17 and for Front/Rear rail under neath the seat seat frame

-Ditto- all as per Ser No 1 but for chair writing drawing No FD-250/280/20 and for Front leg with suitable PVC Shoe

-Ditto- all as per Ser No 1 but for chair writing drawing No FD-250/280/20 and for Front Rail

-Ditto- all as per Ser No 1 but for chair writing drawing No FD-250/280/20 and for Rear Rail

-Ditto- all as per Ser No 1 but for chair writing drawing No FD-250/280/20 and for Side Rail

-Ditto- all as per Ser No 1 but for chair writing drawing No FD-250/280/20 and for Arms Rest

-Ditto- all as per Ser No 1 but for chair writing drawing No FD-250/280/20 and for Stiffner

Removing of old unsv plywood commercial 12mm thick type BWR grade from charpoy GI pipe and tightening of charpoy GI pipe frame and providing new plywood 12mm thick commercial type BWR grade including 3mm thick wood beading on all side edges of plywood Make :National/Kitply/Greenply (Drg No FD 220/227).

Removing of unserviceable locks with keys and supply and fixing new MS locks of size 50 mm 6 levers with stainless steel keys in duplicate of almirah large/medium steel all as shown on drawings, as specified and directed. (Drg No FD 67/1031/1032)

Removing unserviceable legs of almirah steel medium and supply and fixing new one made out of 16 guage MS black sheet & welding all as shown as drawings, as specified & directed. (Drg No FD 67/1031/1032).

Removing unserviceable steel handle and supply and fixing new steel chromium plated handle for almirah large/medium steel all as per drawings as specified and directed (Drg No FD 67/1031/1032)

Removing unserviceable three way locking devices from almirah large steel and supply & fixing new one made out of 8 mm round bars including painting with two coats of synthetic enamel paint over a coat of primer all as per drawing as specified and directed (Drg No FD 67/1031/1032)

Removing unserviceable three way locking devices from almirah medium steel and supply & fixing new one made out of 8 mm round bars including painting with two coats of synthetic enamel paint over a coat of primer all as per drawing as specified and directed (Drg No FD 67/1031/1032).

Removing of unserviceable drawers lock and supply and fix Godrej Lock 50mm, 6 lever of table office clerk/officer steel, complete all as specified and directed alongwith duplicate key. (Drg No FD 84/1003/1004)

Removing old unserviceable top of table office clerk steel of size 1220 x 710mm and S&F new table top of 18 mm thick table top of prelaminated particle board with 20mm x 5mm thick teakwood beading all over the frames as per drawings and as specified and directed . (Drg No FD 84/1004).

Removing of unserviceable drawer supports of table office clk steel/Offr steel and providing new drawer support duly welded and making the drawer sliding smooth functioning all as specified and directed (Drg No FD 84/1003/1004).

Removing of drawers from table office clerk and resetting with alignment after removing of dent and making drawers smooth functioning with greasing (Drg No FD 84/1003).

Removing of unserviceable/broken PVC seat and back of Chair verandah, preparation of steel surfaces (de-rusting & cleaning ) and apply one coat of synthetic enamel white paint to steel surfaces supply and suplly and fixing of new PVC seat 4 mm thick with 90x10mm grooves 10 Nos and 4mm thick ribs on back side complete all as specified & directed (Drg No FD/MAP-II/06)

Removing unserviceable/broken legs and providing new leg made out of first classs hard wood (Indian teak wood) for Table 900 X 600 mm with drawer all as shown on drawings, as specified & directed (Drg No FD -224/41).

Removing of unsv plywood of drawers of table 3'x2' with drawers and supply and fixing new ply 6 mm commerical BWR grade to the table 3'x2' with drawers. All as specified and directed. (Drg No FD -224/41).

Removing of unserviceable/broken glass of dressing mirror Gents of size 1200x600x100mm with mirror door , all as shwon on drawings as specified and directed. (Drg No FD/E6/MAP/16)

-ditto- all as per item no 34 above but hat stand with mirror of size 1000x710x 30mm without leg frame (Drg No FD-233)

Fixing of dressing mirror Gents of size 1200x600x100mm with mirror door , all as shwon on drawings as specified and directed. (Drg No FD/E6/MAP/16)

Fixing of Table dressing single Gents , all as shwon on drawings as specified and directed. (Drg No FD-230)

Fixing of Peg set of 6 , all as shwon on drawings as specified and directed. (Drg No FD-252/253)

Removing of unserviceable/broken top, tightening the loose frame by glue and bamboo pins and providing new top made out of 18/19 mm prelaminated partical board one side teak veneer exterior grade conforming to relevant IS with 4 mm thick Teak wood beading duly polished size 300 X 450 mm Table Peg. (Make - Novapan) (Drg No FD-236/384/25(M).

Removing unserviceable/broken legs and providing new leg made out of first classs hard wood (Indian teak wood) for table peg all as shown on drawings, as specified & directed (Drg No FD-236/384/25(M).

Removing of unserviceable/broken long top rail and supply and fixing first classs Hard wood (Indian teak wood) of size 40 mm X 19 mm thick to table peg all as shown on drawings as specified & directed (Drg No FD-236/384/25(M).

Removing of unserviceable/broken top, tightening the loose frame by glue and bamboo pins and providing new top made out of 18/19 mm prelaminated partical board one side teak veneer exterior grade conforming to relevant IS with 4 mm thick Teak wood beading duly polished size 900 X 450 mm Table Centre. (Make - Novapan) (Drg No FD-134/274).

Removing unserviceable/broken legs and providing new leg made out of first classs hard wood (Indian teak wood) for table centre all as shown on drawings, as specified & directed (Drg No FD-134/274).

Removing of old unserviceable broken arm rest of chair CBA steel & providing new second classs HW handrest duly black polished all as specified and shown on drg No FD-75/120.

Removing of old unserviceable foam cushions with kora cloth lining and tapestry cloth of back rest of sofa to seat 3 person and providing 32 density new polyurethane foam cushion 50 mm thick with kora cloth lining and tapestry cloth all as specified and shown in drg. (Drg No FD-258/18 (M) / FD/MAP-II/02.

Removing of old unserviceable foam cushions with kora cloth lining and tapestry cloth of back rest of sofa to seat one person and providing 32 density new polyurethane foam cushion 50 mm thick with kora cloth lining and tapestry cloth all as specified and shown in drg. (Drg No FD-258/18 (M) / FD/MAP-II/02.

Removing of old unserviceable foam cushion of seat with kora cloth lining and tapestry cloth for seat of 3 persons and providing new polyurethane, foam 40 density 100 mm thick with new kora cloth lining and tapestry cloth all as specified, directed and shown in drg (Drg No FD-258/18(M)/ FD/MAP-II/02.

Removing of old unserviceable foam cushion of seat with kora cloth lining and tapestry cloth for seat single person and providing new polyurethane 40 density 100 mm thick with new kora cloth lining and tapestry cloth all as specified, directed and shown in drg (Drg No FD-258/18 (M)).

Spray painting to Almirah large steel with one coat of synthetic enamel paint of approved quality/shade after applying putty on steel surfaces whereever necessary and making smoothening of surfaces where ever required by sand papering Complete all as specified & directed (Drg No FD-67/1031/1032/FD/E6/MAP/18).

All as per item No 49 above but Almirah Small/Medium steel Drg No FD-67/1032

All as per item No 49 above but book case steel Drg No- FD-90M/1028/45M

All as per item No 49 above but table office clerk steel Drg No FD-84(M)

All as per item No 49 above but book shelf open small steel Drg No FD-69(M)

All as per item No 49 above but side rack with tray steel Drg No FD-97(M)

All as per item No 49 above but chair CBA steel with Arms Drg No FD-75(M)

All as per item No 49 above but chair CBA steel with/Out Arms Drg No FD-75(M)

Removing Ply wood 12 mm thick of size 1.9mtrx 0.9mtr charpoy IP hard top/ Bed hard ply top all as specified & directed (Drg No FD/E6/MAP II/01 & FD/E6/MAP/08(R))

Preparation of previously treated wooden surface of furniture items by scraping removing and cleaning all dirt and filling porcus surfaces or cavities with wood filler and apply french polish of high glossy finish all as specified and directed for Chair dining. (Drg No FD-228/279/FD/MAP-II/05)

-Ditto- all as per item No 58 for Chair writing (Drg No FD-250/280)

-Ditto- all as per item No 58 for Chair Easy (Drg No FD-229)

-Ditto- all as per item No 58 for Peg table (Drg No FD-25/384)

-Ditto- all as per item No 58 for Table bed side (Drg No FD-284/28/FD/E6/MAP/15(R))

-Ditto- all as per item No 58 for Table centre (Drg No FD-134/274)

-Ditto- all as per item No 58 for Table 900X600 with drawers (Drg No FD-283)

-Ditto- all as per item No 58 for Teapoy (Drg No FD-232/34/278)

-Ditto- all as per item No 58 for Table dining 6 persons (Drg No FD-30/FD/MAP-II/03)

-Ditto- all as per item No 58 for Table dining 8 persons (Drg No FD-239/30)

-Ditto- all as per item No 58 for Table 3' x2' with drawer (Drg No FD-41/224)

-Ditto- all as per item No 58 for Table 3' x2' without drawer (Drg No FD-231/42)

-Ditto- all as per item No 58 for Forme with back (Drg No FD-78/97(M)

-Ditto- all as per item No 58 for Notice board (Drg No FD-TP/99M)

Supply and fixing of new stiffner 25mm x25mm to chair dining made out of first classs hard wood (Indian Teak wood) fixing of joints with glue and bamboo pins all as per drawing and as specified and directed by EIC (Drg No FD/MAP-II/05)

Removing of unserviceable/broken handle of Table bed side and fixing with new s/s handle with screw complete all as specified & directed (Drg No FD/E6/MAP/15 (R))

Ditto complete all as per item S No 73 but for Side board (Drg No FD-1112)

Removing of unserviceable/broken PVC sheet of Chair dining JCOs/OR and supply and fixing of new PVC sheet 4 mm thick with holes and 4x10 mm thick ribs moulded alongwith seat in single piece with appropriate screws complete all as specified & directed (Drg No FD/MAP-II/05)

Removing of unserviceable/broken handle/arms of chair writing/chair computer and supply and fixing of the same all as specified and directed. (Drg No FD/E6/MAP/12/FD/E6/MAP/01).

Removing of old threaded unsv bolts from charpoy IP hard top/Bed hard and refitting new existing 08 x nos of bolts of appropriate sizes to charpoy IP hard top/ Bed hard all as specified and directed. (Drg No ED/MAP-II/01, FD/E6/MAP/08(R)

Nakshatra Enterprises

Nisa Enterprises