REPAIRS REPLACEMENT OF STREET LIGHTS AND OTHER CONNECTED WORKS UNDER GE PULGAON

Amount

Attending day to day Complaint of security/street light fittings fixed to wall or mounted on poles by replacing unserviceable parts and removing of carbon from line jumpers/Tightening of jumper/alligment of fitting defective street light/security light fitting/LED light/HPMH light fitting of any wattage/capacity from electric pole carefully and removing old US parts such as LED driver/HPMH lamp/choke/ignitor/Ballast etc, and repairing, testing and re-fixing on site complete all as specified and as directed. Note : (a) Spare parts and accessories such as LED Driver, lamp/tube/choke/ignitor/Ballast and connector, etc will be measured and paid separately under respective item. (b) One electrician and one helper will attend the complaints daily excluding Sundays and holidays all as directed by EIC and collect the complaint slip from the complain cell and ensure that all job given by the dept has to be completed in time. (c) The rates includes all the requisite safety equipment required by the electrician such as Helmet, Safety belt, Safety shoes etc. (d) All required tools will be provided by the contractor. (e) All required minor stores such as insulating taps etc will be included in the quoted rates.

Supply only electronic ignitor for HPMH lamps,components are fitted inside a polypropylene insulating container suitable for 150W lamp. Make Bajaj/Phillips/Wipro/Indo-asian or equivalent.

Supply only electromagnetic ballast consisting of high quality silicon steel lamination with argon welding, super enemelled copper wire suitable for HPMH 250/400 watt fitting . Make Bajaj/Phillips/Wipro/Indo-asian or equivalent.

Supply and fix lamp tubular 400 watt for MH light fitting . Make Bajaj/Phillips/Wipro/Indo-asian or equivalent.

Taking down carefully the old unserviceable Street light and Supply and fix LED streetlight of 25 Watt comprises of pressure die cast Aluminium housing & having system efficiency>104 lumens/Watt i.e 2781 lumns,All LEDs should be highpower LEDs of 1W to 3W Only with moduler lens for batwin shape distribution of 30 degree & 60 degree,Input voltage working range is 140 Vac to 270 Vac,Brand name should be emoboised,Potted Driver is used with 4KV internal & external 5KV Potted surge protection,Short Circuit Protection,Open Circuit Protection,High & low voltage Protection, fixture should withstand high & low voltage protection,fixture should withstand high voltage upto 440 V for 8 hr,IP65 Protected,THD<10%,CRI>70CCT 5700+/-300K,PF>0.9,Driver efficiency>85%,LM79 report require from NABL Accediated lab complete all as specified and as directed. Make : C.G ( CAT LSTS-25-CDL-M ) or equivalent make in Wipro/Phillips/ Havells/Bajaj

Taking down carefully the old unserviceable Street light and Supply and fix LED streetlight of 45 Watt comprises of pressure die cast Aluminium housing & having system efficiency>123 lumens/Watt i.e 5570 lumns,All LEDs should be highpower LEDs of 1W to 3W Only with moduler lens for batwin shape distribution of 30 degree & 60 degree,Input voltage working range is 140 Vac to 270 Vac,Brand name should be emoboised,Potted Driver is used with 4KV internal & external 5KV Potted surge protection,Short Circuit Protection,Open Circuit Protection,High & low voltage protection,fixture should withstand high & low voltage protection,fixture should withstand high voltage upto440 v for 8 hr,IP66 Protected,THD<10%,CRI>70CCT 5700+/-300K,PF>0.9,Driver efficiency>85%,LM79 report require from NABL Accediated lab complete all as specified and as directed. Make : C.G ( CAT LSTV-45-CDL ) or equivalent make in Wipro/Phillips/ Havells/Bajaj

Taking down carefully the old unserviceable Street light and Supply and fix LED streetlight of 60 Watt comprises of pressure die cast Aluminium housing & having system efficiency>110 lumens/Watt i.e 6670 lumns,All LEDs should be highpower LEDs of 1W to 3W Only with moduler lens for batwin shape distribution of 30 degree & 60 degree,Input voltage working range is 140 Vac to 270 Vac,Brand name should be emoboised,Potted Driver is used with 4KV internal & external 5KV Potted surge protection,Short Circuit Protection,Open Circuit Protection,High & low voltage protection,fixture should withstand high & low voltage protection,fixture should withstand high voltage upto440 v for 8 hr,IP66 Protected,THD<10%,CRI>70CCT 5700+/-300K,PF>0.9,Driver efficiency>85%,LM79 report require from NABL Accediated lab complete all as specified and as directed. Make : C.G ( CAT LST-60-CDL ) or equivalent make in Wipro/Phillips/ Havells/Bajaj

Taking down carefully the old unserviceable flood light and Supply and fix LED flood lights capacity of 60W complete all as specified and as directed.

Taking down carefully the old unserviceable flood light and supply and fix Energy saving enviormental friendly ,long life exclusive innovative die-cast aluminium IP65 flood light with high power 150W LEDs as light source ,sutable for high lighting architectural facade highmust and genaral purpose 150W all as directed by EIC. Make : C.G CAT No-LFLN-150-CDL, or equivalent make in Wipro/Phillips/ Havells/Bajaj.

S&F in repair 1100 volts grade 2.5 Sqmm twin core flat heavy duty cable PVC insulated,PVC sheet with solid aluminium conductors, multistranded served with an inner sheathing of PVC tape and overall PVC shathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm dia GI suspension wire including disconnection and removing the unserviceable cable.

S&F in repair 1100 volts grade 4 Sqmm twin core flat heavy duty cable PVC insulated,PVC sheet with solid aluminium conductors, multistranded served with an inner sheathing of PVC tape and overall PVC shathed in service connections .

S&F in repair street light bracket made out of 40 mm dia light grade pipe 1.2 mtr long bend to shape along with two FI clamp made out of 20mmx3mm including nut, bolt, washers Clamps all as directed and taking down the existing bracket.

M & L Earthing complete with galvanised earth plate electrode 60cmx60cmx6 mm thick buried directly in ground not less then 2.25 mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanised iron strip 32x6 mm as earthing lead by means of bolts, nut check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to main switch distribution board complete and testing on completion all as specified and as directed. Note : The unit rate shall also includes for excavation and earth work, in/any type of soil, pit in PCC 1:3:6 type C1 funnel with watering pipe 20mm bore GI light grade from earth test point upto equipment to be earthed, earth lead protection pipe 40mm bore GI light grade, RCC 1:2:4 type B1 cover for earrth chamber, 50mm thick with 8mm dia for steel 150mm C/C both ways & 6mm dia MS round bars as handles of cover slab complete all as specified and as directed.

Supply & Fix in repair steel tubing GI light grade 50mm bore for cable protection passing under Road/Floor or for fixing to poles complete all as specified and as directed.

S&F in repair LED street light Driver for 45 W LED Street light.

S&F in repair LED street light Driver for 60 W LED Flood light.

Dismantling of existing power tool motor replacement of winding completely motor bearing and rewinding the same and repair/replacement the steel rope completely and testing complete all as specified and as directed .

M&L for Preparation of old painted surfaces of steel tubular poles 9/11 Mtr long including cross arms protection pipe and painting one coat of aluminium paint from 2.1 mtr above ground level to top of pole and cross arms and protection pipe and painting of bottom area of pole upto 2.1 mtr from ground level with synthetic enamel paint in alternate bay ( 30 cm wide) with black and yellow paint including writing poles numbers in white letter on black ground complete all as specified and as directed .

Supply and laying XLPE LT 1100 volts underground earthed cable, PVC bedded, galvanized steel strip or wire armoured, electric power cable heavy duty 1100V with multi stranded, aluminum conductor of cross sectional area 4 core x 16 Sqmm including laying, testing and commissioning complete all as specified and as directed.

Supply and laying XLPE LT 1100 volts underground earthed cable, PVC bedded, galvanized steel strip or wire armoured, electric power cable heavy duty 1100V with multi stranded, aluminum conductor of cross sectional area 2 core x 10 Sqmm including laying, testing and commissioning complete all as specified and as directed.

Taking out LT XLPE/PVC insulated armoured cable alongwith all joints of any size from trenches wall/roof including taking out of brick layer and sand from trenches complete all as specified and as directed .

Excavation in trenches not exceeding 1.5 metre wide & not exceeding 1.5 meter in depth for foundation, laying of cable or pipe and getting out in soft/loose soil including trimming the sides and forming bottom surfaces to required levels complete all as specified and as directed.

Returning, filling in trenches in soft/loose soil in layers n.exc. 25 cm after laying of cables including spreading, levelling, wtering, and well ramming complete all as specified and as directed.

Removing surplus excavated soil to a distance n.exc. 50 metre and depositing where directed at a level n.exc.1.5 metre high from the starting point complete all as specified and as directed .

M & L for sand cushioning with dry and clean sand over and under the under ground cable in trenches , ducts for cable protection incliding levellling and consodilation complete all as specified and as directed. Note : Punned thickness shall be measured.

Supplying and laying un-reinforced precast concrete cable cover,Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and as directed.

S&F in repairs MCB TPN 63 amps 415 volts complete all as specified and as directed.

S&F in repairs MCB SPN 32 amps 230 volts complete all as specified and as directed.

M&L for cutting / trimming of tree branches upto 50mm girth all around LT over head line and making free/safe all around 2 mtr LT OH line by taking all precautions and dispose of tree branches to nearest disposal point all as directed.

MAHARASHTRA ENTERPRISES

M/S Maa Durga Constructions,Pulgaon

M/s MM TRADERS

SHREE SIDDHIVINAYAK TRADERS

M/S JAI BHAWANI CONSTRUCTIONS

I P Constructions

Bidder Name

I P Constructions

SHRI RANI SATI TRADERS

SHREE SIDDHIVINAYAK TRADERS

MAHARASHTRA ENTERPRISES

M/S Maa Durga Constructions,Pulgaon

M/s MM TRADERS

M/S JAI BHAWANI CONSTRUCTIONS