Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.4 LAccepted-AOC | ₹32.4 L | L1 | Accepted-AOC Being L1 |
| 2 | L2₹32.6 LRejected-Finance NEAR OLD POST OFFICE SUJANPUR TEH DISTT PATHANKOT PATHANKOT 145001 | PATHANKOT | PUNJAB | 145001 | ₹32.6 L | L2 | Rejected-Finance Other than L1 |
| 3 | L3₹32.8 LRejected-Finance 1ST FLOOR GURJEET MARKET DHANGU ROAD | ₹32.8 L | L3 | Rejected-Finance Other than L1 |
| 4 | L4₹36.1 LRejected-Finance | ₹36.1 L | L4 | Rejected-Finance Other than L1 |
| 5 | L5₹36.3 LRejected-Finance VILL BUNGDAL DADHANI P O BADHANI DISTT PATHANKOT PIN 145001 | PATHANKOT | PATHANKOT | PUNJAB | 145001 | ₹36.3 L | L5 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | Vijay Kumar Contractor and Engineers L3 | pardeep singh marwaha L6 | dadwal engineers L1 | M/S V K TRADERS L4 | M/S SURINDER KUMAR MAHAJAN L2 | M/s GIrdhari Lal Rakesh Kumar L7 | M/S CANTILEVER ENGINEERS L5 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-charge.
Notes:-Demolished material should be thrown out of the defence line including loading,transportation,unloading of debris at govt approved dumping area also no extra cost shall be paid to the contractor by department. | 6.58 | Cum | 200 ₹1,316 | 111 ₹730.38 | 50 ₹329 | 500 ₹3,290 | 250 ₹1,645 | 555 ₹3,651.90 | 60 ₹394.80 |
| 2.00 | Dismantling of floor, hearth or wall tilling, any type flooring including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engineer-in-charge. | 830 | Sqm | 20 ₹16,600 | 11 ₹9,130 | 10 ₹8,300 | 30 ₹24,900 | 13 ₹10,790 | 55 ₹45,650 | 8 ₹6,640 |
| 3.00 | S&F joint free non skid coloured ceramic tiles 07-08 mm thick (square/ rectangular) area of each tiles exc 0.11 Sqm but not exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles. | 300 | Sqm | 800 ₹2.4 L | 777 ₹2.3 L | 640 ₹1.9 L | 750 ₹2.3 L | 750 ₹2.3 L | 999 ₹3.0 L | 630 ₹1.9 L |
| 4.00 | M&L for coloured Glazed ceramic tiles in of premium quality vertical surface such as skirting, dado, riser to step etc 450mmX 350mmX 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in cement mortar 1:4 complete all as specified and directed by Engineer-in-charge.
Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles. | 530 | Sqm | 900 ₹4.8 L | 777 ₹4.1 L | 720 ₹3.8 L | 950 ₹5.0 L | 750 ₹4.0 L | 999 ₹5.3 L | 720 ₹3.8 L |
| 5.00 | M&L for pre- polished granite slab machine cut of any shade as approved by GE of 20 mm thick including over cement screed bed including edge moulding to shape cutting and nosing with suitable hole for cylinder gas pipe, kitchen sink ,WHB, grinding and machine polishing to edge to give high gloss finish (Granite finish) with suitable grinding stones and set in screed bed 15mm thick cement mortar 1:4 in single piece for platform complete all as specified and directed by Engineer-in-charge. | 150 | Sqm | 2,700 ₹4.0 L | 2,555 ₹3.8 L | 2,500 ₹3.8 L | 2,800 ₹4.2 L | 2,513 ₹3.8 L | 2,777 ₹4.2 L | 2,800 ₹4.2 L |
| 6.00 | Taking down cement or cement lime plaster on brick or stone walls etc.including raking out joints,hacking for key,scrubbing down with water,etc. in any position complete all as specified and directed by Engineer-in-charge. Note:-(i) All the wall/floor and surrounding to be made clean after applying OBD/camouflaging painting to the entire satisfactory of Engr-in-charge. (ii) Due care should be taken by the contractor for cover of furniture already existing in the qte/Bldg. | 60 | Sqm | 200 ₹12,000 | 11 ₹660 | 40 ₹2,400 | 20 ₹1,200 | 13 ₹780 | 55 ₹3,300 | 40 ₹2,400 |
| 7.00 | M&L for rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) furnished even & fair using extra cement complete all as specified and directed by Engineer-in-charge. | 60 | Sqm | 250 ₹15,000 | 111 ₹6,660 | 80 ₹4,800 | 150 ₹9,000 | 213 ₹12,780 | 333 ₹19,980 | 80 ₹4,800 |
| 8.00 | M&L for applying 2-3mm thick white wall care putty on wall/ceilling to obtain smooth surfaces and even finish by using vacume based sanding machine, including preparation of surfaces etc. complete all as specified and directed by Engineer-in-charge. | 60 | sqm | 50 ₹3,000 | 111 ₹6,660 | 20 ₹1,200 | 50 ₹3,000 | 85 ₹5,100 | 55 ₹3,300 | 20 ₹1,200 |
| 9.00 | M&L for preparation of old plastered or unplastered surfaces of wall including cornices, pillasters by using vacum based sanding maching to remove all smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc applying two coat of distemper oil emulsion of shade as approved by Engr-in-charge with auto paint roller on old surfaces of walls complete all as specified and directed by Engineer-in-charge. Note- Surface to be made even and smooth by filling the depression if any. | 60 | Sqm | 40 ₹2,400 | 33 ₹1,980 | 30 ₹1,800 | 50 ₹3,000 | 35 ₹2,100 | 33 ₹1,980 | 30 ₹1,800 |
| 10.00 | Taking up or down steel tubing 15mm bore and connections complete all as specified and directed by Engineer-in-charge. | 50 | RM | 5 ₹250 | 11 ₹550 | 10 ₹500 | 20 ₹1,000 | 13 ₹650 | 33 ₹1,650 | 10 ₹500 |
Updated dates
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
21 Jan 2026, 6:00 pmClosed
GE (AF) Pathankot
GE (AF) Pathankot
REPAIR/RENOVATION OF EXISTING KITCHEN CUP BOARD, CABINETS WITH SS TROLIES, GRANITE COOKING PLATFORM AND OTHER SIMILAR WORK IN DOMESTIC AREA AT AFS PATHANKOT
2025_MES_746046_1
GE/PAF-84/2025-26
Open Tender
Civil Works
180 days
GE (AF) Pathankot
As per NIT
9 documents required · 9 mandatory
₹500
GE (AF) Pathankot
₹90,000
Yes
5 Mar 2026
24 Dec 2025
23 Jan 2026
24 Dec 2025
21 Jan 2026
7 Jan 2026
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-charge. Notes:-Demolished material should be thrown out of the defence line including loading,transportation,unloading of debris at govt approved dumping area also no extra cost shall be paid to the contractor by department.
Dismantling of floor, hearth or wall tilling, any type flooring including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engineer-in-charge.
S&F joint free non skid coloured ceramic tiles 07-08 mm thick (square/ rectangular) area of each tiles exc 0.11 Sqm but not exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles.
M&L for coloured Glazed ceramic tiles in of premium quality vertical surface such as skirting, dado, riser to step etc 450mmX 350mmX 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in cement mortar 1:4 complete all as specified and directed by Engineer-in-charge. Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles.
M&L for pre- polished granite slab machine cut of any shade as approved by GE of 20 mm thick including over cement screed bed including edge moulding to shape cutting and nosing with suitable hole for cylinder gas pipe, kitchen sink ,WHB, grinding and machine polishing to edge to give high gloss finish (Granite finish) with suitable grinding stones and set in screed bed 15mm thick cement mortar 1:4 in single piece for platform complete all as specified and directed by Engineer-in-charge.
Taking down cement or cement lime plaster on brick or stone walls etc.including raking out joints,hacking for key,scrubbing down with water,etc. in any position complete all as specified and directed by Engineer-in-charge. Note:-(i) All the wall/floor and surrounding to be made clean after applying OBD/camouflaging painting to the entire satisfactory of Engr-in-charge. (ii) Due care should be taken by the contractor for cover of furniture already existing in the qte/Bldg.
M&L for rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) furnished even & fair using extra cement complete all as specified and directed by Engineer-in-charge.
M&L for applying 2-3mm thick white wall care putty on wall/ceilling to obtain smooth surfaces and even finish by using vacume based sanding machine, including preparation of surfaces etc. complete all as specified and directed by Engineer-in-charge.
M&L for preparation of old plastered or unplastered surfaces of wall including cornices, pillasters by using vacum based sanding maching to remove all smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc applying two coat of distemper oil emulsion of shade as approved by Engr-in-charge with auto paint roller on old surfaces of walls complete all as specified and directed by Engineer-in-charge. Note- Surface to be made even and smooth by filling the depression if any.
Taking up or down steel tubing 15mm bore and connections complete all as specified and directed by Engineer-in-charge.
S&F in repair 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed by Engineer-in-charge.
S&F in repair body fancy type bib taps cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15mm bore complete all as specified and directed by Engineer-in-charge.
S&F in repair 32/40 mm dia bore PVC flexible pipe for wash hand basin/kitchen sink complete all as specified and directed by Engineer-in-charge.
S&F 304 grade stainless steel matte finish double bowl with drain board kitchen sink (45 x 20 x 7.5 inch) made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe complete all as specified and directed by Engineer-in-charge.
S&F in replacement stainless steel plate rack of size 750mm X 750/900mm X 250 mm complete all as specified and directed by Engineer-in-charge.
S&F in replacement 100mm/75mm bore pvc floor trap with anti cockroach with/without hole CP grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1, complete all as specified and directed by Engineer-in-charge.
S&F 0.80mm thick PVC edge binding tape around the 18 to 20mm thick PVC shutter colour complete all as specified and directed by Engineer-in-charge.
Taking down existing Kitchen cabinets cupboards and Supply and fixing for factory made 18-20mm thick solid WPC(wood particale composit) sheet one side laminated with 1.50mm thick scratch less acrylic sheet 6m grade (of pattern as approved by GE) and other side wood nature for cupboard shutter of density 600 kg /cbm bent 90 including 100% termite/water proof, fire rertradent, Eco friendly, and finish at all edges at level etc.complete as per direction of engr-in charge and Manufacture specification complete all as specified and directed by Engineer-in-Charge.
S&F in repair factory made 18 to 20mm thick solid WPC (wood particle composit) without pre-laminated sheet having both side wood nature colour for cupboard partitions/slabs of density 600kg/Cbm bent 90 including 100% termite/water proof, fire rertradent, eco friendly complete all as specified and directed by Engineer-in-charge.
S&F 100mm long aluminium handle cast type anodised complete all as specified and directed by Engineer-in-charge.
S&F 10mm continuos(piano) hinges Mild steel bright finish width of flaps (when open) complete all as specified and directed by Engineer-in-charge.
S&F 100mm size hasp and staple aluminium anodised safety type fixed with screws complete all as specified and directed by Engineer-in-charge.
S&F 50mm dia polished hardwood knobs fixed with screws complete all as specified and directed by Engineer-in-charge.
S&F Magnet ball catcher for cupboard shutter fixed with screws complete all as specified and directed by Engineer-in-charge.
S&F stainless steel plain basket of size 17" x 20" x 8" complete all as specified and directed by Engineer-in-charge.
S&F Stainless steel plain portion basket of size 17" x 20" x 6" complete all as specified and directed by Engineer-in-charge.
S&F Stainless steel cutlery basket of size 17" x 20" x 4" complete all as specified and directed by Engineer-in-charge.
S&F Stainless steel plate/thali basket of size 17" x 20" x 8" complete all as specified and directed by Engineer-in-charge.
S&F Stainless steel cup & soucer basket of size 17" x 20" x 4" complete all as specified and directed by Engineer-in-charge.
S&F Stainless steel plain basket of size 17" x 20" x 6" complete all as specified and directed by Engineer-in-charge.
S&F 20" long telephonic slider to facilitate drawer slide of steel ball bearing fixed with steel screwscomplete all as specified and directed by Engineer-in-charge.
S&F 14" long telephonic slider to facilitate drawer slide of steel ball bearing fixed with steel screws complete all as specified and directed by Engineer-in-charge.
Please Enable Macros to View BoQ information
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.44 MB
tender84.pdf
Tender Documents • 0.94 MB
schofcredit84.pdf
Additional Documents • 0.19 MB
BOQ_835369.xls
BOQ • 4.88 MB
Download all tender documents and submit your bid
