Electrification to the additional block and additional block for Girls Hostel, additional block for Boys Hostel at Veterinary college and Research Institute, Orathanadu.

Amount

Electrical Works

Supply, Installation, Testing and Commissioning of Indoor type LT Switchboards, Floor mounting type, Bottom/Top entry. Refer standard : IS 13947, 8623(part-1) Enclosure: Compartmentalized Single front CRCA Doors:2mm Body:2mm Gland:3mm covers and partitions:1.6mm IP class:IP52 for Indoor/IP55 with weather proof enclosure for outdoor Bus bars: Electrolytic grade conductivity as per standard IS 5082 Bus bar Material: As per SLD Bus bar supports: DMC/FRP/SMC Bus bar joints: Shrouded/Tinned Breakers: Microprocessor based above 250A/Thermal Magnetic up to 250A Protection releases: As per SLD(Adjustable over current & short circuit unless otherwise specified) Ics=Icu for all breakers Utilization category: All MCCB/ACB's shall be Cat: A except ACB's for Ltg & raw power input distribution panel shall be with Cat: B . Louvers:Busbar chamber shall have louvers with fine mesh inside Shade: Epoxy powder coated RAL 7032 Design: Modular type Cable entry: As per site condition SPD should have N/O contact for remote indication Bus bar insulation: Copper bus bars with color coding at the ends/Copper shall be bare with color coding at the ends/For Humidified areas the copper bus bars shall be coated with tin.MAIN MV PANEL: Supply & commissioning of MAIN MV PANEL - suitable for 415Volts 3Phase 4wiresystem, fabricated from 14/16SWG CRCA sheet steel, gland plates at top/bottom, complete with internal wiring, ferrules, name plates, painting etc., conforming to the technical specification for panels& comprising of the following. INCOMER - 2Nos of 250A, 50KA, 4 pole MCCB having Electronic Trip Unit with adjustable protection against Overload and Short Circuit Metering for Incomer (Each)1No - Digital Multimeter1Set - 160/5A, Class 1.0, 5VA Cast Resin CTs for metering & Protection1set - R,Y & B LED type Indication lamps Bus bars:200A TPN Copper Busbar. If the busbar is painted with a non-metallic matt finish paint with colour coded and SMC Bus bar supports. Current density of the bus bars shall not exceed 0.8A/sqmm.1 set of Surge protection device of protection level Outgoing feeders - 63A 36kA TPN MCCB of 3Nos and 100A 36kA TPN MCCB of 5Nos - Under voltage relay with time delay1Lot - Control MCB1set - suitably rated CT's for metering.1Sets - Control MCB

LIGHTING PANEL: Design, manufacture, testing at works, transportation to site, unloading, storing, leading, erecting, testing & commissioning of suitable for 415Volts 3Phase 4wiresystem, fabricated from 14/16SWG CRCA sheet steel, single fronted, free standing, front hinged, rear removable, extendable on both sides, dust & vermin proof, cubicle type, floor mounted, undrilled gland plates at top/bottom, complete with internal wiring, ferrules, name plates, painting etc., conforming to the technical specification for panels& comprising of the following. INCOMER - 1, 2Nos of 200A, 36 KA, 4 pole MCCB having Electronic Trip Unit with adjustable protection against Overload and Short Circuit, Metering for Incomer (Each)

EB meter panel: Design, manufacture, testing at works, transportation to site, unloading, storing, leading, erecting, testing & commissioning of floor/wall mounting unit the following components.Incomer:3x200A TPN fuse cutouts - 1set with 200A neutral link.3x200A fuse cutouts with sealing covers and neutral link - 1setwith space to mount CT meter and one lot of wiring, earthing etc. Including all interconnections & accessories etc as required. The outgoing side shall be connected to 1Nos 200A TPN FSU with HRC fuses along with adopter boxes duly earthed.

Supply and erection concealeding of Lighting Distribution Board :- LDB 16Way 1ph DBs (Incoming DP MCB, Outgoing SP MCB) Incomer : One No. 32A DP MCB - 'C' curve Outgoing : 14 Nos. 6/10/16/32A SP MCB - 'C' curve (14way outgoing each phase) (make: L&T/ Hager/Siemens)

Supply, installation, concealeding ,testing & commissioning of 12Way TPN seven segment type, double door Lighting distribution boards (LDB) conforming to the technical specifications for MCB DB's & comprising of the following. Incomer: 1No - 63A 16kA 4P MCB Phase control: 3Nos - 40A, 30mA DP MCB Outgoings: 36Nos - 6A 10kA SP MCB " C " Curve (make: L&T/ Hager/Siemens)

Supply, installation, concealeding, testing & commissioning of 8Way VTPN , double door Power distribution boards (VTPNDB) conforming to the technical specifications for MCCB DB's & comprising of the following. Incomer: 1No - 125A TPN MCCB Outgoings: 8Nos - 63A TPN MCB (make: L&T/ Hager/Siemens)

Supply, laying, testing & commissioning of the following sizes of 1.1KV grade XLPE Cable, Aluminium / Copper Conductor armoured power cables on trays, ceilings, walls trenches, ground etc., with necessary clamps, cable ties, fasteners, identification tags, cable marking as required. Cost of sand, bricks, excavation should not be included in the rate quoted & measured separately. 3.5C X 50 Sq.mm A2XFY Cable - Lighting Panel Incoming & VTPN DB (make polycab/universal)

4C X 25 Sq.mm A2XFY Cable - DB Incoming cable (make polycab/universal)

4C X 16 sqmm A2XFY - FOR 3PH 4 pole MCB isolator (make polycab/universal)

Supply & end termination of following AL/CU armoured power cables with necessary double compression brass glands, AL/CU. terminal sockets, insulation tapes, fasteners, earthing clips & connecting the clip to main earth bus with suitable bare copper wire complete accessories as required. 3.5C X 50 Sq.mm A2XFY Cable - Lighting Panel Incoming & VTPN DB

4C X 25 Sq.mm A2XFY Cable - DB Incoming cable

4C X 16 sqmm YWY - FOR 3PH 4 pole MCB isolator

Light , Power Socket & Wiring Supply, installation, testing and commissioning of the following light fittings. Rate shall be inclusive of all accessories, holders, ballast, starters etc as required interconnection of wires from ceiling rose the fittings and to all type of lamps suitable to the fixture / T8 or T5 fluorescent tubes / CFL lamps with low lost Electronic Ballast etc. Supply and fixing of twin type 4'-20W LED tube or equivalent fitting suspension mounted luminaire rate inclusive with 600-1000mm down rod and ball socket (make: Philips/Crompton or equivalent)

Supply and fixing 4'-20W LED single tube Wall or Ceiling Surface mounted luminaire with connection complete (Phillips/Crompton or equivalent)

Supply and fixing of 1 X 11 W Wall mounted luminaire for Mirror Light with suitable connection complete (Philips/Klite)

Supply and fixing of 48 watts LED street light or equivalent on GI pipe with GI bend on wall with syntex box enclousure.with suitable connection complete (make: Philips /Wipro or equivalent)

Supply and fixing of 18 watts LED or equivalent square/round fitting on ceiling/ wall with suitable connection complete. (make: Philips / Wipro or equivalent)

Supply and fixing of 120 watts focus LED type or equivalent fitting on ceiling/ wall with suitable connection complete. (make: Philips / Wipro or equivalent)

Supply and fixing of 18" Exhaust fan with light trap arrangements with suitable connection complete. (make: Almonard / Khaitan/Usha)

Supply and fixing of 1200 mm (48") AC ceiling fan High speed with stepped electronic 120W regulator plate with suitable down rod on the Clam. with suitable connection complete( make: Crompton High speed)

Supply , installation, testing and commissioning of 11W LED lamps in position including Flat/angle holder in toilets with suitable connection complete

Supply, installation, testing and commissioning of modular 16A Control Switch (Anchor or equivalent) for each hostel room as per technical specification.

Supply, installation, testing and commissioning of Modular type 6A/16A Universal Socket (Anchor or equivalent) controlled by 16A Switch in sheet steel enclosure concealed to wall/floor/ceiling/furniture including MS/PVC conduit all accessories and associated civil works

Supply, installation, testing and commissioning of 32A Metal glad Socket controlled by 32A MCB concealed to wall/floor/ceiling/furniture including PVC conduit all accessories and associated civil works for AC points (make: L&T/Hager/Siemens)

Supply, installation, testing and commissioning of modular type 6A 5 pin Universal Socket( Anchor or equivalent) outlet with switch in sheet steel enclosure concealed to wall/floor/ceiling/furniture including PVC conduit all accessories and associated civil works, etc.

Supply, installation, testing and commissioning of 63A FP MCB isolator as per technical specification and suitable connection complete. (make: L&T/Hager/Siemens)

Supply, installation, testing and commissioning of 6/10/13A 3 Nos Universal Socket (Anchor or equivalent) outlet with switch in sheet steel enclosure concealed to wall/floor/ceiling/furniture including all accessories and associated civil works, etc. For Computer Socket

Supply, installation, testing and commissioning of 40mm (15") AC wall mounting fan complete with MS clamp with necessary with suitable connection complete. (make: Crompton/Usha/Khaitan)

Supply and laying of XLPE insulated multistranded copper conductor wire with 2 runs of 4 sq.mm (P & N) and one run of No:14 TC (Earth) in 25 mm dia PVC conduit for concealed in all types of wall, ceiling etc. complete with all accessories, wiring terminations etc. as per standards & specifications. The rate shall include supply of wires, conduits, junction box and termination accessories etc - For 5/15A & 15A Socket (make polycab/RR cable/Kundan cab)

Supply, wiring, testing & commissioning of 2R-10Sq.mm+1R - No:14 TC copper conductors including suitable PVC conduit in wall/ ceiling with all accessories required from DB to Switch Board - For Light incoming / power circuit. the rate shall inclusive of all conduit & switch box, switches. (make polycab/RR cable/Kundan cab)

Supply, wiring, testing & commissioning of 2R-2.5Sq.mm+1R - 14 TC copper conductors including suitable PVC conduit in wall/ ceiling with all accessories required from DB to Switch Board - For Light Wiring and computer sockets wiring, the rate shall inclusive of all conduit & switch box, switches. (make polycab/RR cable/Kundan cab)

Supply and laying of XLPE insulated multistranded copper conductor wire with 3 runs of 14 TC (P, N & E) in 25 mm PVC conduit for surface and PVC conduit for mounted in concealed/surface all types of wall, ceiling etc. complete with all accessories, wiring terminations etc. with 6A modular switch ( Anchor or equivalent).The rate shall include Switches, metal boxes, junction boxes etc.. and supply of wires, conduits, junction box and termination accessories etc. from switch box to Light/Fan/Exhaust Fan/Wall mounting Fan. (Point wiring) (make polycab/RR cable/Kundan cab)

Supply and laying of XLPE insulated multistranded copper conductor wire with 3 runs of 14 TC (P, N & E) in 25 mm PVC conduit for surface and PVC conduit for mounted in concealed/surface all types of wall, ceiling etc. complete with all accessories, wiring terminations with 6/6A 5 pin SS modular plug cum socket( Anchor or equivalent) in Ms box concealed with wall switch box for plug. (make polycab/RR cable/Kundan cab)

Equipment earthing: Supply and installation of earth pipe electrode as per IS 3043 complete with 3mtr long with 40mm dia 'B' class G.I. pipe and GI earth plate of size 600mm x 600mm x 6mm including watering funnel. Including 750mm x 750mm x 3mtr long excavation and construction of 850mm x 850mm x 300 mm high brick wall chamber with cement mortar. The chamber shall be provided with 450mm x 450mm x 10mm cast iron / RCC cover with frame and lockable facility. The plate electrode shall be filled with alternate layer of salt and charcoal as required full depth. The Cover shall be heavy duty to suit heavy vehicle movements:

Supply and laying of 25 x 3mm copper flat for MV panel boards body earthing.

Supply and run of No.8 copper base conductor on wall/floor with suitable 'U' nail clamp for connect earth pit to DB, etc.

Getting liasoning from TNEB and availing EB supply to the building with approval from the CEIG with drawings- 3 sets.

Preparation of single line Electrical Schematic diagram in colour- 5 sets.

Bidder Name

Turbo Electrical Engineers