Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹23,900
Closing Date
10 Aug 2026, 4:30 pm
EXECUTIVE ENGINEER, MALDA MECHANICAL DIVISION, PHE
OFFICE OF THE EXECUTIVE ENGINEER, MALDA MECHANICAL DIVISION, PHE DTE. DOULATPUR PHE COMPLEX, P.O. MALIHA, DIST. MALDA, PIN 732102
Replacement of old damaged suction piping arrangement at Sankaritolaghat intake pumping station within Malda Arsenic water supply scheme, dist Malda under Malda Mechanical Division PHE Dte.
2026_PHED_1033191_3
WBPHED/EE/MLMD/NIeT_04 of 2026-2027
Open Tender
Electrical Work/ Equipment
Item Rate
45 days
DOULATPUR PHE COMPLEX, P.O. MALIHA, DIST. MALDA
Please refer Tender documents.
3 documents required · 3 mandatory
₹23,900
23 Jul 2026
23 Jul 2026
12 Aug 2026
23 Jul 2026
10 Aug 2026
23 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Charges for dismanting 600 mm dia suction pipe line part by part by cutting the pipe line joint including carrying the damaged pipe from the site to departmental store at Daulatpur PHE complex by hiring suitable four wheeler vehicle including loading & unloading at both the ends as per direction of EIC (The cost includes hiring charges of Welding set, lifting tool tackles and ferry boat at site to complete the job as and when required) | 1 | Item | - | - |
| 2Supply, delivery and storage of following mechanical components at site. | |||||
| 2.02 | S.S Strainer (SS-304) with Flange size DN 900 mm with 600mm Long Rod size 8 | 1 | no | - | - |
| 2.03 | DN 600 mm X DN 900 mm X 600 mm long M.5. Bellmouth. | 1 | no | - | - |
| 3 | Supply and delivary at site of 600mm dia MS (ERW) pipe (Fe410) of wall thickness 9.50 mm as per IS:3589-2001 including of loading carriage unloading & stacking properly at Departmental store/Work Site all complete as per direction of EIC | 30 | Mtrs | - | - |
| 4 | Charges for replacement of 600 mm dia suction pipe line part by part by welding the pipe line joint with necessary fabrication and proper alignment of the pipe as required for the same by using the above supplied materials as in item no. 2.01 to 2.03 considering charges of Welding set and lifting tool tackles on hire basis including supply of 1 inches X 100 mm long MS Nut Bolt with double washer, 3 inches holding "U" shape clamp, 5 mm thick rubber gasket as per direction of EIC (The cost includes hiring charges of ferry boat at site to complete the job as and when required) | 1 | Item | - | - |
| 5 | Testing of the newly laid suction pipe line by running the pumping machinery as per direction and up to the entire satisfaction of EIC. | 1 | Item | - | - |
| 6 | Add GST @ 18% | 1 | item | - | - |
| 7 | Add Cess @ 1% | 1 | item | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.20 MB
WBF2911.pdf
Tender Documents • 0.50 MB
BOQ_2538086.xls
BOQ • 0.41 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].