CA NO. GE (AF)/SGR-73/2024-25 COMPREHENSIVE MAINTENANCE AT SMQ AREA UNDER

Amount

S&F in repairs CP waste coupling (half or full threaded) for discharge pipe of 32 / 40mm bore (Minimum weight 45gms), complete all as specified and directed.

S&F in repairs 32/40 mm dia bore PVC flexible pipe for wash hand basin / urinal, complete all as specified and directed.

S&F in repairs 15mm size PVC connections with PTMT nuts of length 600mm, complete all as specified and directed.

S&F in repairs 100mm dia CP grating doom, complete all as specified and directed.

S&F in repairs CP Health faucet fixed with spring action and lever along with flexible shower hose with brass nut of length 1.5m fitted in the existing water connection in the toilets, complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail 20mm dia "D" type 60cm long between flanges, complete all as specified and directed.

S&F in repairs plastic water closet seat cover closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device, complete all as specified and directed.

S&F in repairs 15mm bore bib tap, cast copper alloy, chromium plated, with capstan handle, screwed down, screwed from iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repairs 15mm bore pillar tap, cast copper alloy quarter turn, chromium plated, fancy type, CP screwed down high pressure, complete all as specified and directed.

S&F in repairs 15mm bore Stop valve / angle valve, fancy type, CP cast copper alloy screwed down high pressure with capstan head, complete all as specified and directed.

S&F in repairs 15mm bore hot and cold water mixer with swan neck for WHB chromium plated quarter turn screwed down, including necessary fittings, complete all as specified and directed.

S&F in repairs 15mm size sink mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

S&F in repairs 15 mm size wall mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, flushing cistern low level, white with inlet ball valve, float and handle including brackets and PVC flush pipe etc., complete all as specified and directed.

S&F in repairs vitreous china wash basin white flat back, size 550x400 mm, with & including 32mm dia PVC waste pipe and waste coupling with & including angle iron brackets of suitable size & length or erecting stand etc., complete all as specified and directed.

S&F in repairs Vitreous china squatting pan, Orissa pattern, size 580 x 440mm and making good, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc., including trap set in and including concrete, complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern ) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe , PVC cover sheet in same colour etc., complete all as specified and directed.

S&F in repairs for 15mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed.

S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and as directed.

S&F in repairs looking mirror of size 600x450mm with PVC moulding, complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty / wooden beading in squares not exceeding 0.50 Sqm including hacking old glass, complete all as specified and directed.

S&F in repairs 20 mm dia stainless steel drapery rod standard quality including steel funnel and steel brackets, complete all as specified and directed.

Taking down and refixing of shutters in same opening after easing and adjusting of any description exc 1 sq. m and n exc 2 sq. m each including resecuring/changing of builders hardware complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm, complete all as specified and directed.

S&F in repairs stainless steel plate rack (Utensil Rack) of size 990mm x 915mm x 380mm, made out of stainless steel 1.00mm thick sheet fixed with brass screw of required size including necessary fittings/nuts, bolts & washers, complete all as specified and directed.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 Sqm and credited to the contractor, complete all as specified and directed Note: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening, complete all as specified and directed.

S&F Factory made Solid Panel PVC Door Shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F 100mm size Aluminium handles, cast type, anodised, complete all as specified and directed.

S&F 100mm size Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F 100mm long medium weight, cold rolled mild steel Butt hinges, complete all as specified and directed..

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings, gates etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; nosing, framework of water tanks, band, straps, wind ties and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St-240, complete all as specified and directed.

S&F in repairs 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating, complete all as specified and directed.

S&F in repairs 0.63mm thick Galvanised, Plain mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating, complete all as specified and directed.

Preparing new zinc (or galvanised) surfaces to receive painting of any description over 10cm width or girth, by coating with mordant solution including washing and cleaning, etc. steel and iron surfaces and applying two coats of synthetic enamel paint, complete all as specified and directed.

Preparation of new steel surface and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint and over red oxide primer, complete all as specified and directed.

M&L for rendering 15mm thick on other than fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement including taking down old existing plaster, complete all as specified and as directed.

Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15cm thick (below or above ground level), complete all as specified and directed.

Demolition of cement / lime concrete from sunken portion in ground floors and paving exc 15cm thickness (below or above ground level) including surface finishes of any type such as Mosaic, terrazzo tile / tiles, complete all as specified and directed.

M&L for applying two coats of Shalimar Supercrete/ NITBOND water proofing coating on the entire surface of sunken portion and including 15 mm thick rendering in cement mortar 1:3 on sunken portion of toilet including admixed with integral water proofing compound FOSROC's complast X 421 IC @ 130 ml per bag of cement including bonding coat of FOSROC's Nito bond AR cement slurry/ STP No 1 liquid @ 200 ml per bag, complete all as specified and directed.

M&L for plain cement concrete, 1:5:10, Type E-2 (using 40mm graded crushed stone aggregate) as filling in Sunken portion, complete all as specified and directed.

S&F 40mm bore mild steel galvanised iron tubing, medium grade, cut to size and fixed as spout pipe in sunken floor of toilet, complete all as specified and directed.

M&L for 25mm thick plain cement concrete, 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in sub base, complete all as specified and directed.

M&L for Glazed ceramic tile 300x600x06-7mm thick (coloured) on vertical surfaces such as wall, dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for Light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for Light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat CM 1:4, complete all as specified and directed.

Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc., complete all as specified and directed.

M&L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms with gas pipe hole, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade, complete all as specified and directed.

M&L for 20-25mm thick Machine cut Kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for 20-25mm thick machine cut kota stone slab as in riser of steps, skirting, dado and pillar jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing & polishing over and including 15mm thick backing coat in CM 1:6, complete all as specified and directed.

Deduction to be made from BOQ for Schedule 'A' Part-II (Credit Schedule from dismantling / taking down items) worth Rs 89,395.00 during AOC. (Note :- Tenderers shall not quote for this Schedule)

M/S TARIQ AHMAD SHEIKH (BID ID -3252559)

M/S Abdul Ahad Rather (BID ID -3253996)

M/S KHAN ENTERPRISES (BID ID -3254586)

M/S LUCKY BUILDERS (BID ID -3254868)

M/S M.R. Construction (BID ID -3253293)

M/S UTA MOTORS (BID ID -3251845)

M/S A.R TANTRAY (BID ID -3254979)

M/S WANI AND SONS (BID ID -3253868)

M/S LATIF AHMED MIR (BID ID -3252456)

M/S GULZAR ENTERPRISES (BID ID -3250136)

M/S FAROOQ AND SONS (BID ID -3254311)

M/s PARVAZ CONSTRUCTION COMPANY (BID ID -3254619)