Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.7 LAccepted-AOC | L1 | Accepted-AOC Being the lowest and reasonable bidder | |
| 2 | L2₹19.0 L+₹14,069.60 (0.74%)Rejected-AOC | L2 | Rejected-AOC Being the other than lowest bidder | |
| 3 | L3₹19.6 L+₹74,374.60 (3.94%)Rejected-AOC | L3 | Rejected-AOC Being the other than lowest bidder | |
| 4 | L4₹19.9 L+₹99,874.60 (5.29%)Rejected-AOC | L4 | Rejected-AOC Being the other than lowest bidder | |
| 5 | L5₹20.0 L+₹1.1 L (5.88%)Rejected-AOC | L5 | Rejected-AOC Being the other than lowest bidder |
Tender Value
₹23.7 L
EMD Value
₹47,500
Closing Date
5 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE Nagrota
HQ CWE Nagrota Co 56 APO
SPECIAL REPAIR TO BLDG NO PS-231(SINGLE OFFRS ACCN) OF 21 SATA REGT AT NAGROTA MIL STN UNDER GE NAGROTA
2024_MES_636559_1
CWE/NGT-39/2023-24
Open Tender
Civil Works
Item Rate
182 days
Nagrota
As per NIT and tender documents
8 documents required · 8 mandatory
₹500
Yes
GE Nagrota
₹47,500
Yes
16 Mar 2024
9 Jan 2024
12 Feb 2024
9 Jan 2024
5 Feb 2024
30 Jan 2024
9 Jan 2024 - 16 Jan 2024
Amount
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each and removing from site.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm each and n exc 4 sqm and removing from site.
Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles.
M&L for Brick work with sub class “B” bricks straight or curved on plan exc 6M mean radius built in CM 1:6 using old size bricks complete all as specified
Demolition of cement concrete (unreinforced) in ground floors and paving not exc 15cm thickness.
Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc.
S & F pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 125 x 60mm including one coat of red oxide primer complete all as specified.
S&F Solid PVC Door Frames of size 50mm X47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing
S&F 100mm long butt hinges (medium weight) colled rolled mild steel fixed with welding.
S& F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140mm
S&F Extruded aluminium alloy handles fabricated type anodised of size 125mm long 12mm dia.
S&F Aluminium anodized 150mm long barrel tower bolt of extruded section and fixed.
S&F MS 300 mm ordinary rat rails rod pattern springs including roller and roller plate.
S&F 250mm long aluminium alloy, anodized sliding door bolt with hasp staple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.
S&F Hasp and staple Aluminium anodised including bolt to hinges plate 100mm size
S&F Factory made, 2nd class hard wood, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete, all as specified .
S&F 35mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepared to receive glass ,gauge etc ( without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8 clause 8.20(a), supplied and fitted to chowkats.
Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain PVC sheets for top rail lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawings.
S & F Box type Steel windows with double shutters (inside for wiremesh & out side for glass), incl guard bar, hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.
S & F Box type Steel ventilators top hung double shutters (inside for wiremesh & out side for glass), incl guard bar, hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.
S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm dia and fixed with tinned tacks or galvanised mild steel staples
S&F Sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square n exc 0.5 Sqm.in each pane
All as per Srl item No 23 above but figured glass
S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. of required size complete all as directed. Make : Vista/lever ( all golden colour) or equivalent.
M&L for Rendering 10mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 (internally) finished even and smooth without using extra cement all as specified
M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 (Externally) finished using wpc ( wpc to be measured and paid seperately) even and smooth without using extra cement all as specified
M&L for Rendering 5 mm thick in CM (1:3) on ceiling finished even and smooth without using extra cement including preparation of surface .
Supply only integral water proofing compound.
M&Lfor Roughening surfaces of old concrete surfaces of any description over damaged surfaces irregular facia, chajjas and in similar work and also for narrow width etc and rendering dubbing coat 15mm thick cement plaster in CM (1:4) over a coat of cement slurry @ 3.00 Kg/Sqm making surface even followed by 5mm thick rendering in CM (1:3) finished complete all as specified and directed
M&L for Applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces any description, not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified.
M&L for Applying two coat of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description, not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified.
M&L for Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of wall putty 2 to 3mm thick on plastered surfaces preparatory to distempering on wall surface .
M&L for Complete removal of existing treatment and applying two coats of oil bound distemper over a coat of wall putty 2 to 3mm thick on plastered surfaces preparatory to distempering on wall surface.
M&L for Preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer.
M&L for Complete removal of existing treatment and applying two coats of cement base paint on old wall surface .
M&L for Preparation of newly plastered surfaces of ceiling and applying three coat of white washing complete all as specified.
Preparation of old plastered surfaces of ceiling and applying two coat of white washing complete all as specified.
M&L for Machine cut kota stone flooring 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) (Each stone not less than 55 cms x 55 cms) over 15mm thick screed bed in CM ( 1:4) as in floor finished rough including roughening of existing surfaces and applying a coat of cement slurry @ 03 Kg/Sqm of surface.
All as per Srl item No 39 above but in tread of steps.
M&L for Machine cut kota stone slab 18-20mm thick in skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) over 15 mm thick rendering in CM ( 1:4) including taking out of existing dado.
All as per Srl item No 41 above but in riser of staircase.
S&F vitrified ceramic tiles 10mm thick,(square/rectangular ) polished, light shade area of each tiles not exceeding 0.36sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified.
M&L for screed bed or bedding layer of cement mortar 15mm thick in CM 1:6 for laying floor finish complete all as specified.
S&F vitrified ceramic tiles 10mm thick,(square/rectangular ) polished ,light shade area of each tiles not exceeding 0.36sqm, on vertical surface such as skirting etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified.
M & L for Non-skid coloured tiles 400x400x7mm thick as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over screed bed or beddding layer of CM 1:4, 15 mm thick over complete all as specified & directed.
M & L for 25mm thick PCC 1:2:4 type B-1 as a sub base to receive topping layer finished even and rough
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises as directed
M&L for glazed ceramic tiles of size 600x300x7mm thick as on walls/ vertical surfaces over 10mm cement rendering in cement mortar 1:4 complete all as specified and directed.
M & L for PCC 1:2:4 type B-1 as in benching coping etc and similar items including weathering slightly rounded or chamfered angles and throating on top of chajjas rails cills etc.
M & L for 50mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection finished even and fair all as specified.
S&F Framed work rolled section as in framing compound girder staging for water tank,cooler frame and the like built up from two or more beam or channel section or angles with plates stiffeners etc complete.
Dismantling unservicable /cracked water tanks and removing from site capacity exc 500 ltr n.exc 1000 ltr complete all as specified and directed.
S&F Rotational moulded polyethene water storage tank three layered of 1000 ltr capacity hoisted and fixed in position including PVC float valve 20 mm bore .
Taking down steel tubing and connection including cleaning for refixing or removal to store bore of pipe 15mm
Taking down steel tubing and connection including cleaning for refixing or removal to store bore of pipe 20mm
S&F 20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors.
All as per Srl item No. 70 above but fixing only
S&F 15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs complete all as specified.
M&L for Cuttings chases for concealed water tubing of concealed conduit (cutting n.exc 10 cms girth) and making good in CM ( 1:3) in brick walls.
S&F Shower rose brass chrominium plated of 125mm size.
S&F Cast copper alloy CP bib tap fancy type screwed down , screwed for iron pipe of 15mm dia/ bore of pipe
S&F Cast copper alloy CP stop cock /angle Valve fancy type screwed both ends for iron pipe of 15mm dia/ bore of pipe
S&F in repair single lever wall mixer 3-in-1 system with provision for both hand shower & overhead shower complete with 115mm long bend pipe, connecting legs & wall flange (without hand & overhead shower) fancy type complete all as specified. Make:- Jaguar, FLORENTINE Code No-FLR-CHR-5281N or equivalent in Kohler/ Artize.
S&F Stop valves ,cast copper alloy ,screwed down high pressure , with crutch or butterfly handle , screwed both ends for iron pipe or for union of 20mm dia
S&F Towel rail 600mm long of PTMT fixed with including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gm).
S&F in repair sheet Glass shelf assembly consisting of 5.5mm thick glass sheet shelf 12cm wide with chormimum plated bracket guard and railing 60 cm long, complete all as specified.
S&F in repair Corner Glass Shelf (with Bracket) as per directed by Engr-in-charge. Make:- Jaquar, Cat No- ACN-1173 or equivalent in kohler/ Artize.
S&F in repair chromium plated towel rack 600mm long without lower hangers, complete all as specified. Make :- Jaquar Cat No- AKP-CHR-35781PS or equivalent in kohler/ Artize.
S&F for wash down water closet pan (pedestal pattern) wall hung EWC (size-370x510x360mm) including PP Soft close seat cover, hinges, accessories set and all fittings complete all as specified and directed. Make:- Jaquar-CNS-WHT-963NS or equivalent
S&F health faucet with 1 meter long easy flex tube in chrome finish & wall hook, complete all as specified Make:- Jaquar-ALD-565 or equivalent
S&F stainless steel soap dish holder including fixing arrangement complete all as specified and directed.
S&F in repair soap dispenser with glass bottle, complete all as specified. Make:- Jaquar, Cat No- CAN-CHR-1135N or equivalent
S&F vitreous china wash hand basin white flat back of size 550x400 mm with pedestal including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including brass chromium plated waste coupling with long screwed sank and fly nuts complete all as specified.
S&F in repair 450mm Long Braided Hose with Two 15mm Nuts & Rubber Washers (Both Side) Without Nipple (Suitable for Geysers) complete all as specified. Make :- Jaquar, Cat No- ALD-CHR-805B or equivalent in kohler/ Artize.
S&F Brass CP basin mixer fancy type for mixing hot & cold water screwed down for iron pipe and fixed of 15mm bore dia of pipe
Dismantling cast-iron/PVC pipes including fittings taking out of trenches or walls as required dia of pipe upto 100/110mm.
S & F 100mm bore cast iron spun pipe, soil, waste and vent pipes in any length with or without ears including jointing with cement joints, fixed to walls, complete all as specified and as directed.
S & F 100mm bore cast iron spun pipe, soil, waste and vent pipes in any length with or without ears including jointing with cement joints, laid in trenches or in floor, complete all as specified and as directed.
S & F 75mm bore cast iron spun pipe, soil, waste and vent pipes in any length with or without ears including jointing with cement joints, fixed to walls, complete all as specified and as directed.
S & F 75mm bore cast iron spun pipe, soil, waste and vent pipes in any length with or without ears including jointing with cement joints, laid in trenches or in floor, complete all as specified and as directed.
S&F cast iron bends any radius for 100mm bore.
S&F cast iron bends any radius for 75mm bore with oval access door.
S & F cast iron branch pipes, single (equal or unequal ) ordinary or inverted ( spigot or socket type) or with parallel branches for 100mm bore with oval access doors complete all as specified.
S & F cast iron branch pipes, single (equal or unequal ) ordinary or inverted ( spigot or socket type) or with parallel branches for 75mm bore with oval access doors complete all as specified.
S&F cast iron vent cowl 75mm bore
S&F cast iron floor trap with grating including jointing to waste pipe in solvent for 75mm bore including CP grating cover with or without hole complete.
S&F as in repair 110 mm PVC (SWR) WC Connector with lip ring complete all as specified.
Material and labour for roughening surface of old concrete, roofs by picking, sweeping clean and washing down with wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, and use to neat cement slurry complete including removing debris and rubbish from site complete all as specifed and as directed by Engineer-in-Charge.
M&L for PCC 1:2:4 type B-1 (20mm graded aggregate ) 50mm thick as in padding finished even and smooth without using extra cement
M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including bitumen primer @ 3.5Kg/Sqm
M&L for Laying APP (atatic polypropylene) modified membrane 3mm thick and weighing not less than 3 kg/sqm with 160 GSM/sqm, non woven polyester mat as center core reinforcement, laid with 75 mm side over lap and 100mm end over lap, the membrane has to be laid with LPG tourch and over lap sealed and finished neat over roof including a coat of bitumen 85/25 at the rate of 1.2 Kg per sqm over APP membrane with aluminium paint on top .
Taking down existing cement plaster of sunken floor/wall,roughening and cleaning by brushing wire brushes to remove all dirt, with and including applying a coat of industrial bitumen 85/25 penetration @ 1.20kg/sqm over rendering 15mm thick in CM 1:3 using WPC finished rough over a coat of neat cement slurry @ 3.0kg/Sqm complete all as specified and as directed. ( wpc to be paid measured and seperately).
M&L for Chequered cement concrete coloured tiles 30 cm x 30 cm x 25 mm thick set , jointed and pointed in neat cement slurry with grey cement and pigment in floors
M&L for Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:6
M&L for PCC (1:3:6) 75 mm thick type C-2, using 40mm graded stone aggregate as in floors in bed to receive tiles /path tiles etc.
Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custody for taking credit complete all as specified and as directed by Engineer-in-Charge
Taking down ceiling fan any sweep, removing blades ,cleaning the fan completely for dust and dirt as well as oiling & greasing and hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook, rubber pad, nut bolts and washers etc, complete, all as specified and directed by Engineer-In-Charge.
M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20mm dia ,concealed in wall and surface on ceiling with all conduit fittings & fixing acessories inculding sunken anodised pressed steel terminal box not less than 1.2mm thick covered with 3 mm thick plastic laminated sheet cover of suitable size with brass screws for mounting switches, sockets, regulators with and including 1.5sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly complete all as specified for the following :-
(a) One light point controlled by one switch 5 Amp.
(b) One ceiling fan/exhaust fan point controlled by one switch 5Amp
(c) One socket out let 5Amp controlled by one switch on same board.
(d) One socket out let 5 Amp controlled by one switch on independent board.
(e) One bell point 5 Amp controlled by one bell push on independent board.
(f) One light point controlled by two, 2way switchs5 Amp
All as per item No 100 here in before but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15Amp socket out let controlled by one 15Amp switch on independent board.
S&F switch piano flush type 5 Amps single pole one way complete.
S&F socket outlet 5 pin, 5 Amp flush type complete.
S&F switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete.
S&F switch socket combination 2 in 1, 5 pin, 5 /15 Amps flush type complete.
S&F bell push piano type 5 Amps complete.
S&F electric bell ding dong 230 volt AC complete.
S&F of ceiling rose 3 terminal complete PVC/Polycarbonate isolated body complete all as specified and directed.
S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required all as specified and directed.
Supply and fixing LED light fitting 1x 18 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
S&F for lamp holder PVC/polycarbonate type with back plate suitable for batten fittings including 7 Watt LED bulb complete all as specified and directed.
Supply & fixing heavy duty Metal body Exhaust fan 300 mm sweep single phase AC 230/240V complete with louvers.
S&F sheet metal enclosure distribution board SPN 8 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete including taking out existing unserviceable DB with MCBs.
S&F MCB SPN 40 A to 63 A 10 KA 240 volts "C" series complete
S&F MCB single pole 6 to 32 Amps 10 KA 240 volts "C" series complete
S&F sheet metal enclosure double door for distribution board factory made for MCB DB load link Vertical TPN 4 way suitable for MCCB as incomer, 100 Amp,4 pole. (when MCB's are to be used) with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down all as directed by Engr-in-Charge at site including taking out of exsing UNSV DB with MCBs. (Note: MCCB 100 Amp 4 pole should be measured and paid seperately)
S&F MCCB 100A 4Pole 16KA 415 Volt with fixed magnetic and fixed thermal setting complete.
M&L in replacement of sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked minimum 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 sq mm as earth continuity conductor connected to commen earth and earth dolly complete including taking down existing UNSV.
S&F building security light luminaries energy saving and environment friendly long life LED light of 25W made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and impact resistance of IK07, including MS Bracket light grade 25 mm dia, 1.2 m long bend in shape fixed on wall having an angle 120 degree, fixed with and suitable size nuts, bolts and washers etc including taking down of existing light fitting and complete ,all as specified and directed.
M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion complete.
Note:- Schedule of credit of Rs. 22,584.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.
M/S Shankardass Devidass
BHARTI CONSTRUCTIONS
ASHWANI KUMAR KHAJURIA AND SONS
R.K. Works
SUNIL AND CO
Karmnaya Construction
M/S MANISHA BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .