SITC OF PA CONFERENCE SYSTEM AND ELECTRONIC BOOM BARRIER SYSTEM WORK AT SUCHNA BHAWAN LUCKNOW

Amount

BOQ OF PA/CONFERENCE SYSTEM TO BE INSTALLED IN MEETING HALL AND AUDITORIUM Digital Chairman unit with following features The Unit shall be flushed mounted on the table and shall have Microphone socket for pluggable Microphone, request switch, Low Level Loudspeaker. All the module shall be pluggable type, and connected to Digital Interface Unit. Provision shall be made so the unit can be click-to-fit mounted in combination with couplings and end caps in wooden surface. The cut out in table should be minimal and should not be more than Length 150 mm x width 40 mm. Flush mounted Priority button to override delegate units. Priority key shall generate an optional chime tone to sound while temporarily or permanently muting all active delegate units. The chairman microphone remains active as long as the priority button is pressed. The microphone should be with following feature - Microphone on/off button - Red Microphone on indicator (active mic) - Yellow color for VIP microphone indication - Low susceptibility to mobile phones - Uni-directional microphone on adjustable stem - Built-in “Silent” function - No audio output until the headphone is connected - Two push-buttons (up/down) for headphone volume control Approved Make : TOA/Bosch/PASO

Digital Delegate Unit for Members Flush Mount Modular unit with following feature The Unit shall be flushed mounted on the table and shall have Microphone socket for pluggable Microphone, request switch, Low Level Loudspeaker. All the module shall be pluggable type, and connected to Digital Interface Unit. Provision shall be made so the unit can be click-to-fit mounted in combination with couplings and end caps in wooden surface. The cut out in table should be minimal and should not be more than Length 100 mm x width 40 mm. The microphone should be with following feature '- Microphone on/off button '- Red Microphone on indicator (active mic) '- Green request indicator (request-to-speak accepted, in waiting) '- Yellow color for VIP microphone indication '- Low susceptibility to mobile phones '- Uni-directional microphone on adjustable stem '- Built-in “Silent” function '- No audio output until the headphone is connected '- Two push-buttons (up/down) for headphone volume control Approved Make : TOA/Bosch/PASO

Digital Interface Unit for Delegate Units Interface Unit shall be surface mounted type for easy mounting under table. It shall be Digital Type for routing of audio and control signal in digital domain only It shall have provision for connecting external speaker/ microphone Frequency response : 125 Hz - 20 Khz Harmonic distortion <0.5% Harmonic distortion at overload < 1% Crosstalk attenuation at 4 kHz > 80 dB Dynamic range > 90 dB Approved Make : TOA/Bosch/PASO

Wall Mount Speaker SITC of wall mount loudspeaker with dual 4" LF, single 1"HF driver with Built-in LMT.The loudspeaker should have a frequency Response (-10 dB) 65 Hz - 20 kHz having a Sensitivity ≥89 dB, 1W/1m,Max SPL ≥111 dB; Coverage(HxV): 120 x 80 ,Power handling pk.≥400 Watt; Wattage Taps @ 100V: 7.5W, 15W, 30W Approved Make : TOA/Bosch/PASO

Mixer Amplifier Supply of Powered Mixer ideal for installs with inbuilt Class D amplifier, Max. midband output power, 1 kHz, THD = 1%, dual channel into 4 Ω :2 x 450 W into 8 Ω: 2 x 270 W , also capable of Direct-Drive option for 100V speaker lines. Frequency response, -3 dB, ref. 1 kHz,Any input to any Mixer output 15–22000 Hz.Crosstalk, 1 kHz Amplifier Ch1/Ch2 < -85 dB.5 MIC/LINE input channels with compressor / limiter and talk-over function, 3 Stereo Inputs including Jack, RCA and USB connectors, onboard player for MP3 or WAV audio files, high quality effects section with 32 editable presets, 3 Master outputs with 7-band EQ each and flexible signal routing options, delay line for Master-B (150 msec / 50m), Auxiliaries (FX, AUX) 1 Post, 1 Pre ,Input impedances MIC 2 kΩ CD 10 kΩ All other inputs > 15 kΩ, headphones control, LPN speaker processing, , comprehensive protection package, , optional rack mount kit. Approved Make : TOA/Bosch/PASO

Supply Audio Processor cum feedback suppressor Feedback Supressor having following features complete as required to meet the enclosed specification.DSP to suppress acoustic feedback , should have upto 12 dB gain before feedback occurrence,Balanced line / microphone input with phantom power , should have second microphone input with automatic mixer, frequency response : 150 to 12000Hz, Distortion <.1% at 1Khz, S/N >90db, Signal Delay < 11 ms, feedback suppression algorithm . Approved Make : TOA/Bosch/PASO

Wire Less Hand Held Microphone Hand Held Mic Supply of Wireless Lapel Mic with Cardiod polar pattern for transmitter ,Receiver & Transmitter frequency response 100Hz-18kHz or better, Receiver RF sensitivity < 1.0 µV, Receiver Image rejection>55dB,Receiver Dynamic range >95dB and receiver having 32 channels possible Receiver S/N ratio >100dB A, distortion <1 %, Transmitter sensitivity - 5.6 mV/Pa, modulation:+/-40kHz . 19 "Equipment Rack Made of MS for housing of all above equipment , front lockable glass door, Fan tray fro colling, Caster wheel base , Main Panel with Spike Buster, Indivdual FUSE power supply unit, including all internal wiring/ interconnection as required Approved Make : TOA/Bosch/PASO

S/I/T/C of 5 KVA online UPS with batteries for a power back up upto 30 minutes. Approved Make : Microtek/APC/Luminous

Cable & Accessories Loud Speaker/Mike Cable

Conference Cable

Connectors

Supply OF 900 Watts DSP amplifier, Fully integrated professional speaker processing with FIR Drive technology, Maximum Output Power Single Channel 2 Ω 3200 W,2.7 Ω 700 W,4 Ω 1800 W,8 Ω 950 Signal Processing FIR Filters, Audio Limiters Output delay per channel, 31 band GEQ per channel, PEQ per channel, Load impedanc,Signal to Noise Ratio Amplifier, >109 dB, Intuitive system control software, makes setup and control easy Approved Make : TOA/Bosch/PASO

Supply of 300 Watts Speaker with Maximum SPL 130 dB, Nominal impedance 8 Minimum impedance 8 Crossover frequency minimum 1.6 kHz or better, speaker should be Signal Synchronized Transducers (SST) waveguide design provides precise and consistent coverage, minimal distortion, and maximized acoustical loading and Professional-grade hardware Approved Make : TOA/Bosch/PASO

Supply of Mixer with 8 input channels with 4 Mic/Line, 2 Mic/Stereo-Line, 2 Stereo-Line inputs 2 High-Quality FX processors, editable with 100 factory and 20 user presets Professional 4x4 24-bit/96kHz USB interface, recording software and MIDI interface for FX control Stereo EQ for the main mix, Input Sensitivity,MIC -74 dBu,LINE (Mono) -54 dBu,LINE (Stereo) -34 dBu (15.5 mV),Equivalent Input Noise, MIC input, A-weighted, 150 ohms -130 dBu Approved Make : TOA/Bosch/PASO

Gooseneck microphone with Mulit-Pattern,Frequency Response 50 Hz to 20,000 Hz ,Polar Patterns: Omnidirectional Cardioid Super cardioid Hypercardioid,Dynamic Range >101 DB, Power Phantom, 12 – 52 VDC Approved Make : TOA/Bosch/PASO

S/I/T/C of 2 core 1.5 mm speaker cable

CMC - 2nd Year from the date of completion

BOQ OF ELECTRONIC BOOM BARRIER SYSTEM S/I/T/C of electromagnetic intensive use boom barrier upto 6 mtrs, 6 sec opening/closing time, including smart controller, Photo cell, boom base plate, remote and different accessories and fasteners, elegant boom rest with rubber pad, push button proper earthing electrical wire, switches, MS fixtures etc, complete in all respaect with 2 years maiintenance from the date of completion. Approved Make : Beninca Inn/Gunnebo/Quiko

CMC - 2nd Year from the date of completion

Alliance Telesys Industries Pvt. Ltd.