SPL REPAIR TO BLDG NO T-2 AT ARMY CAMP BAGJOLA ALONGWITH CERTAIN REVENUE AND MINOR WORKS UNDER GE (NORTH) KOLKATA

Amount

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and directed.

All as per item No. 1 above but chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

Supply and fix aluminium powder coated glazed or gauged shutter for sliding window (2 or 3 track) with aluminium channel section weighing not less than 0.55 kg per sqm including aluminium channel, including all necessary fittings such as roller, joining cleats, glazing clips, rubber packing aluminium screw as required etc. complete all as specified and directed. (Note:Wiremess/ glass shall be measured and paid separately)

Supply and fix powder coated anodised aluminium glass louver/ ventilators with blades of 10mm heavy duty with lever handle etc. complete all as specified and directed. (Note- Glass shall be measured and paid separately)

Supply and fix powder coated aluminium frame for doors, windows, ventilators (including 2/3 track) with one or more rebates including joining cleats for fixing etc. complete all as specified and directed.

Supply and fix stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and directed.

Supply and fix 4mm thick sheet glass ordinary quality, glazing with aluminium beads in square/ rectangular exceeding 0.5 Sqm in each pane fixed to aluminium frame complete all as specified and directed.

Supply and fix 4mm thick frosted glass ordinary quality, not exceeding 0.5 Sqm in each pane fixed to metal frame complete all as specified and directed.

Supply and fix 2nd class hard wood, plain, solid , straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

Supply and fix 35mm thick 2nd class hard wood factory made plain framed panelled door shutters, (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneered on both faces and rail and stiles as per IS 1003 (Pt-I), kiln seasoned and chemically pressure treated etc. complete all as specified and directed.

Supply and fix 35mm thick 2nd class Hard wood factory made glazed and skeleton door shutters, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR Part-I, clause 8.24 (a) complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) for fixing of hold fasts block and similar work including necessary form work complete all as specified & directed.

Supply and fix mild steel work as in hold fast or similar article conforming to Fe-410-0 or Fe-310-0 including tarring and sanding complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube with EPDM gasket as per specification and drawing complete all as specified and as directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification and drawing complete all as specified and as directed.

Supply and fix 100 mm size butt hinges, medium weight, stainless steel and fixed complete all as specified and as directed.

Supply and fix 100 mm size butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.

Supply and fix rolled mild steel Fe-410-w (grade E-250) quality A framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to new steel surface including preparation of surfaces exceeding 10cm width or girth complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces of any description over 10cm width or girth including preparation of new surfaces complete all as specified and as directed

Supply and fix in repair 25mm dia powder coated aluminium curtain rod fancy type ( length from 0.90m to 1.8m) with fancy type end side brackets and fancy type hanging brackets complete all as specified and as directed.

Roughnening surface of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust, etc. complete all as specified and directed.

Dismantling old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed

Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n.exc. 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Material and labour for coloured Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in skirting/ dados etc. over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed.

Demolition of reinforced cement concrete of roofs, floors , staircases, landing, chajjas and similar suspended works in ground floors beams (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) (1:1.5:3) type A1 (using 20mm graded stone aggregates) as in foundations, including rafts, foundation beams, plinth beams, bases for columns and mass concrete, complete all as specified and directed. Note: Reinforcement and formwork shall be measured and paid separately.

M&L for reinforced cement concrete (nominal mix) (1:1.5:3) type A1 (using 20mm graded stone aggregate) as in lintel, beams and like complete all as specified and directed. Note: Reinforcement and formwork shall be measured and paid separately.

M&L for reinforced cement concrete (nominal mix) (1:1.5:3) type A1 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts, complete all as specified and directed. Note: Reinforcement and formwork shall be measured and paid separately.

M&L for form work to sides of concrete foundations, footings, bases of columns, rafts beams, sides and soffits (if any) of foundations and plinth beams complete all as specified and directed.

M&L form work to sides of lintels, roof beams, for rough finished surfaces of concrete complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions, for rough finished surfaces of concrete complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) (1:1.5:3) type A1 (using 20mm graded stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. Note: Reinforcement and formwork shall be measured and paid separately.

M&L for reinforced cement concrete (nominal mix) (1:1.5:3) type A1 (using 20mm graded stone aggregate) as in chajja, complete all as specified and directed. Note: Reinforcement and formwork shall be measured and paid separately.

Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc as required and welding with existing bar complete all as specified and as directed.

Material and labour for TMT bars 6 to 8mm bar, cut to length, bent to shape required, including cranking, bending, lapping etc as required and welding with existing bar complete all as specified and directed.

All as per Item No. 39 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surfaces of concrete complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window -cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

Supply and fix in repair stainless steel sink with drainage board made out of 1.00 mm thick sheet for kitchen with plug washers, waste pipe including bedding in cement mortar on dwarf wall or including galvanised iron cantiliver brackets connecting union overall size 915 X 460 mm with bowl size 405x355x178mm or 410x357x178mm complete all as specified and as directed

Supply and fix stainless steel kitchen Plate Rack of size 24''x30''x10'' complete all as specified and as directed.

Material and labour for 5 mm thick plastering in CM (1:3) on concrete surfaces as in sides of column, lintel, beam, chajja, facia, railing, RCC wardrobe etc including finishing the surface even and smooth without using extra cement complete all as specified and as directed.

Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Material and labour for 20mm thick plaster in cement mortar (1:4) in two layers, i.e 10mm thick in each layer, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall finished the surface fair and even complete all as specified and as directed. Note :- WPC shall be measured and paid separately.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing liquid admixture for concrete and mortar complete all as specified and directed.

Material and labour for rendering 5mm thick in cement mortar (1:3) on concrete surfaces as in ceiling and finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer to newly plastered surfaces of wall including preparation of surfaces complete all as specified and as directed.

Material and labour for complete removal of existing treatment of old plastered surfaces on wall including washing, rubbing down and stopping of old treatment and applying two coats of oil bound distemper over a coat alkali resistant primer etc complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified & directed.

Material and labour for complete removal of existing treatment of old plastered surfaces of wall including washing, rubbing down and stopping of old treatment and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.

Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed

Demolition of cement concrete of any description including any treatment there to and in any position provided as in roof padding, roof kerb etc complete all as specified and as directed. Note: - (a) Demolition should be done carefully to roof slab. (b) Any damage occurred in the roof surfaces during demolition shall be made good by the contractor without extra cost to the department. (c) Disposal of old debris/retrieved material to outside the premises or as directed by the Engineer-in-Charge.

Material and labour for providing plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggregates) as in roof padding laid in slope as per requirement mixed with integral water proofing liquid admixture as per manufacturer's instructions complete all as specified and as directed. Note : (i) Minimum thickness of PCC shall be 50mm. (ii) Integral water proofing liquid admixture shall be measured and paid separately.

Material and labour for water proofing treatment with APP based standard membrane over PCC padding in roof with the following courses of treatment :- (a) Applying bituminous primer (IS 3384) @ 0.40 Kg per sqm of the surface area including cleaning the surfaces complete all as specified. (MAKE : Pibial Primer of TEXSA or equivalent product of BITUMAT/ BITUNIL/SIKA) (b) Applying APP plastomeric bitumen based mineral finished water proofing membrane polyester reinforced(4 Kg/Sqm) with 10cm over laps and torch bonded at joints including surface preparation before and after application of treatment as per manufactures instruction complete all as specified. (Make of APP Membrane: Moply FP 4 Kg mineral of TEXA/WP Shield 103 PM of SIKA or Equivalent material of BITUNIL/BITUMAT. (Note :- Cost of cutting groove to parapet wall for inserting APP membrance and filling groove with cement mortar (1:3) is deemed to be included within the quoted rate.)

Supply and fix in repairs prelaminated particle board 18/19 mm thick, interior grade one side decorative choice lamination and other side balancing white lamination fixed in cup boards shutters with 6mm thick teak wood lipping/edging all round complete all as specified and as directed.

Supply and fix in repairs prelaminated particle board 18/19 mm thick, interior grade one side decorative choice lamination & other side balancing white lamination fixed in cup boards shelves with front side 6mm thick teak wood lipping/edging complete all as specified and as directed.

Supply and fix 100mm long hasp and staple, safety type, brass with mild steel hinges pin including bolt to hinge plate and fixed with brass screw complete all as specified and as directed.

Supply and fix in repair rotational moulded polyethylene water storage tanks (multi layered) 1000 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

Supply and fix in repairs 25mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed.

Taking up or down 15mm dia steel tubing and connections, segregating serviceable pipe for reuse complete all as specified and as directed.

All as per item No. 69 above but 20mm dia complete all as specified and directed.

All as per item No. 69 above but 25mm dia complete all as specified and directed.

M&L for cutting chases pinning in making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, cutting not exc 10 cm girth in brick wall complete all as specified and directed.

Supply and fix 15mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm sq fixed to walls, ceiling or in floors etc. complete all as specified and directed.

All as per item No 73 above but 20 mm outer dia complete all as specified and directed.

All as per item No 73 above but 25 mm outer dia complete all as specified and directed.

S&F Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply and fix in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 'P' or 'S' trap (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and as directed.

Supply and fix one pieced-white wash basin with pedestal (550 X 400)mm (oval/ square pan) a/w brackets / MS nuts and bolts for fixing, fixed with CP waste coupling and connecting waste pipe etc. complete all as specified and directed.

S&F waste fittings 32mm brass, chromium plated for glazedware sinks, basins, etc. with long screwed shanks and fly-nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Supply and fix in repair PVC Multi Utility Mirror Cabinets of size 355mmx455mm complete all as specified and as directed.

Supply and fix in repair pillar tap of 15mm bore, cast copper alloy with capstan heads fancy type, chromium plated screwed down, high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fix pillar tap of 15mm bore, cast copper alloy with capstan heads fancy type, chromium plated screwed down, high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed

Supply and fix in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fix in repair brass chromium plated shower rose of 125mm size fixed including 15 mm dia CP arm complete all as specified and directed.

S&F in repair angular stop valves fancy type chromium plated 15 mm dia screwed down, high pressure with crutch or butter fly handle, screwed both ends, complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.

Supply and fix in repair stop cock concealed type of 15mm bore fancy type, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed.

Supply and fix 10 litre capacity PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia for low level cistern including PVC connections 15mm size with PTMT nuts and washer both side of length 600mm complete all as specified and directed.

Supply and fix chromium plated towel rail of 20 mm dia, D type, 600mm long between flanges fixed with chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed.

Supply and fix grating doom 125mm dia of PTMT (Minimum wt 25 Gms) complete all as specified and directed.

Dismantling cast iron drain pipes 100mm, jointed in cement mortar obtained either from trenches/wall as required complete all as specified and as directed. (Note : Excavation if required, shall be measured and paid separately)

S&F 100mm ( outlet dia) Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Supply and fix 100mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and as directed.

Supply and fix 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured)/Tee complete all as specified and as directed.

Supply and fix 100mm bore cast iron cowls complete all as specified and directed.

M&L for plain cement concrete (1:3:6) Type C-2 as in bed to drain pipes including packing under & haunching against the sides of pipes of 150 mm dia pipe after they are laid & tested complete all as specified and directed.

Dismantling Asbestos cement / Transluscent ( Corrugated , semicorrugated etc.) sheets as in Roof covering , wall , ridge , hips valleys and flashings etc for the building structures not exceeding 10 m height from the average ground level complete all as specified and as directed.

Supply and fix pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

Supply and fix pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

Dismantling timber scantling 40sqcm and over in section in any position complete all as specified and directed.

S&F rolled section of grade Fe-410W (Gde E-250) quality A as in main and cross beams hip and jack rafters, purlins where connected to common rafters and running rails and fixed with angle cleats or other connecting plates by welding complete all as specified and directed.

Dismantling wall and ceiling board ( fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets etc. complete all as specified and directed.

Supply and fix Anodised aluminium snap grid frame work size of grid 605mmx605mm for false ceiling including GI hangers 6mm dia GI wire (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and as per manufacturers instruction complete all as specified and directed.

Supply and fix of 6mm thick high pressure steam cured non asbestos fibre cement designer ceiling board of size to suit grid mould (605 x 605mm as specified above) and fixed in grid mould with necessary fixing arrangement as per manufacturer’s instruction complete all as specified and directed.

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Material and labour for 75mm thick PCC type D2 (1:4:8) (using 40mm graded stone aggragates) as in subbase of floors etc. complete all as specified and directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, over 20 mm thick screed bed or bedding layer of mortar in CM (1:6) for laying floor finishes set, jointed with grey cement and pigment and pointed in neat cement slurry in floors complete all as specified and directed.

Material and Labour for precast RCC (1:1.5:3 ) Type A-1 ( using 20 mm graded stone aggregate ) as in manhole cover and set in position with cement mortar ( 1:4 ) including demolition of existing unserviceable RCC cover slab with MS handle complete all as specified and as directed .

Excavating in post holes each n.exc. 0.5 Cum and getting out in soft /loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm complete all as specified and directed.

Surface excavation n.exc.30cm deep and averaging 15cm deep and getting out in Soft/loose soil complete all as specified & directed.

Excavation in trenches, not exceeding 1.5 m wide or not exceeding 10 sq m on plan and not exceeding 1.5 m in depth for foundation etc and getting out in Soft/loose soil complete all as specified & directed.

Returning filling including spearding levelling watering and well ramming in layer n. exc. 25 cm in soft/loose soil copmplete all as specified & directed.

Removing excavated soil n.exc 50 mtr and deposited where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Material and labour for providing cement concrete in foundations (1:4:8) type D2 (using 40mm graded stone aggregates) for foundation filling and mass concrete complete all as specified & directed.

Material and labour for preparation of newly plastered surfaces of wall by vaccum based sanding machine, and applying two coats of Anti Fungal paint white or coloured by Auto Roller over a coat of primer, including necessary scaffoldings complete all as specified and as directed and as per manufacturers instructions.

Material and labour for preparation of newly plastered surfaces of wall by vaccum based sanding machine, applying wall care putty upto 1.50mm thick (Multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of emulsion distemper white or coloured by Auto Roller over a coat of primer complete all as specified and as directed as per manufacturers instructions.

M&L for applying 1.5mm thick wall care putty and applying two coats of oil bound distemper over a coat of alkali resistant primer to newly plastered surfaces of wall complete all as specified and as directed.

M&L for applying 1.5mm thick wall care putty and applying two coats of oil bound distemper over a coat of alkali resistant primer to ceiling to new plastered surface complete all as specified and as directed.

Dismantling of old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing and rubbish off the premises) complete all as specified and as directed.

Material and labour for Light shade Vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles n.exc. 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 20mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

Material and labour for Light shade Vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles n.exc. 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles including 10mm thick rendering in CM(1: 4) complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 150 mm thick, watered and rammed to a true surface, complete as specified and as directed.

M&L for hardcore of gauge exc.63mm but not exc. 150mm ,deposited,spread and levelled in layers n.exc. 15cm thick,watered/rammed to a true surface complete all as specified and directed..

M&L for 40mm thick cement concrete (1:2:4) type B1 (using 20mm graded stone aggregates) as in floors complete all as specified and directed.

Materials and labour for 75mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in pavement/ plinth protection, laid in bays and joints shall be filled up with bituminous gola with 80/25 bitumen (1 part of bitumen to be mixed with 3 part of sand) and finished the surface fair and even complete all as specified & directed.

Material and labour for treating ends of posts, backs of chowkats, etc., with tar or coal tar black paint area tarred exc 0.1 sq. m but n exc 0.5 sq. m each complete all as specified and as directed.

Supply and fix PVC (SWR) pipe 110mm bore, type A, single socketed, in any length with rubber ring joints fixed to walls with and including PVC clip complete all as specified and as directed.

Supply and fix PVC (SWR) bends/ shoe/ Tee 110mm dia complete all as specified and as directed.

Supply and fix steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and as directed.

Supply and fix Plates (plain or chequered ) Grade 410 -W (Gde E-250 ) quality-A channels, square cut or notched (ordinary and counter sunk ) forming holes ,without any attachment complete all as specified and directed.

Supply and fix of pre-painting galvalume sheets having pitch 190mm, depth 29mm and not less than 0.50mm thickness having tensile strength of 550 Mpa (Galvalume base-PPGL trapezoidal profile sheets) fixed with aluminium self tapping screws of size 50/75mm and aluminium washer of suitable size in roof covering complete all as specified and directed.

Material and labour for providing cement concrete (1:2:4) type B1 (using 20mm graded stone aggregates) as in copping including weathering, slightly rounded or chamfered angles and necessary formwork complete all as specified and as directed

Supply and fix in repair rimless one piece floor mounted ceramic wash down water closet with soft close slim seat cover of size 69cmx37cmx71cm with 2/4ltr flushing and 'S' type trap complete all as specified and directed. Make Hindware Model Name "Elba" / Equivalent Model of Makes specified in OS here-in after.

Supply and fix counter type white wash basin of size (550 X 400) mm (oval/ square pan), fixed with CP waste coupling and connecting waste pipe etc complete all as specified and directed.

Supply and fix health faucet (ABS body) with 8mm dia 1 meter long flexible tube and wall hook for fixing to 15 mm dia pipe complete all as specified and as directed.

Supply and fix chromium plated two ways bib cock with wall flange for fixing in 15 mm dia pipe complete all as specified and as directed.

Supply and fix corner glass shelf with CP railing complete all as specified and as directed. Make: Jaquar or equivalent.

Supply and fix toilet paper holder with flap recessed type (stainless steel) complete all as specified and as directed. Make: Jaquar or equivalent.

Supply and fix in repair chromium plated bottle trap with CP waste couplings fixed with wash had basin complete all as specified and directed.

Supply and fix chromium plated grating doom of 125mm dia complete all as specified and directed.

Supply and fix Rotational moulded polyethylene water storage tanks (multi layer) 500 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

Supply and fix aluminium powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steelheavy duty and fixed complete all as specified and directed.

S&F cast brass pivot suitable for aluminium door, complete all as specified and directed.

S&F Brass 2 lever Mortice lock, vertical type, size 100 mm complete all as specified and directed.

Supply and fix 5.5mm thick frosted glass ordinary quality, glazing with aluminium beads in square/ rectangular exceeding 0.5 Sqm in each pane fixed to aluminium frame complete all as specified and as directed.

Taking down carefully copper/ aluminium point wiring (light, fan, call bell, socket or power) complete, including fittings and fixtures such as switches, ceiling rose, pendants, holders, regulators, sockets, light fitting etc. & removing from site and making good the disturbed surfaces of wall, ceiling etc. complete all as specified and directed

Material and labour for point wiring (concealed type) with PVC insulated FRLS (Fire reatrdant low smoke) cable 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of modular GI boxes of thickness not less than 0.8 mm thick for mounting modular inner and outer cover combine plate and accessories complete for fixing of modular switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way modular switch complete all as specified as directed. Note: Cutting chases and making good to disturbed surfaces is deemed to be included in quoted rate.

All as per item No 150 above but for one 3/5 pin 6 Amps socket outlet on the same board with other switches complete all as specified as directed.

All as per item No 150 above but for one 3/5 pin 6 Amps socket outlet on the independent board complete all as specified as directed.

All as per item No 150 above but for One call bell point controlled by one bell push switch complete all as specified as directed.

All as per item No. 150 above but for one light point controlled by two 2 way modular switch complete all as specified as directed.

Material and labour for point wiring (Concealed type) with FRLS PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of modular GI boxes of thickness not less than 0.8 mm thick for mounting modular inner and outer cover combine plate and accessories complete for fixing of modular switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for 3/5 pin 16 amps socket point on independent board complete all as specified as directed.

Supply and fix modular switch 1 way, 6 A, 1 module complete all as specified and as directed.

Supply and fix modular switch 1 way, 16A, 1 module complete all as specified and as directed.

Supply and fix modular socket 6A 2/3 pin combined 2 module complete all as specified and as directed.

Supply and fix modular socket 15A/16A, 2/3 pin combined 2 module complete all as specified and as directed.

Supply and fix modular switch 2 way, 6 A, 1 module complete all as specified and as directed.

Supply & Fix Bell push switch modular type 1 module complete all as specified as directed.

Supply and fix lamp holder insulated body with back plate for angle/batten fittings complete all as specified and as directed.

Supply and fix ceiling rose surface bakelite, 65 x 50mm, three terminals complete all as specified as directed.

Supply and fix Call bell, AC, 230 volt, single pole including taking down old unserviceable call bell complete all as specified and as directed.

Supply and fix modular type electronic fan regulator stepped type flush type AC 240 volt 2 module complete all as specified and as directed. .

Supply and fixing modular motor starter 16A , 2 module for Geyser power supply including taking down old metal clad socket complete all as specified and directed. Cat No. 679271, Make: Legrand or equivalent model of Makes specified in PS here-in-after.

Supply and fixing modular white cover plate with metallic frame 2 module complete all as specified and directed. Cat No. 673242, Make: Legrand or equivalent model of Makes specified in PS here-in-after.

All as per Item Ser No. 167 above but for 3 module complete all as specified as directed. Cat No. 673213, Make: Legrand or equivalent model of Makes specified in PS here-in-after.

All as per Item Ser No. 167 above but for 4 module complete all as specified as directed. Cat No. 673214, Make: Legrand or equivalent model of Makes specified in PS here-in-after.

All as per Item Ser No. 167 above but for 8 module complete all as specified as directed. Cat No. 673268, Make: Legrand or equivalent model of Makes specified in PS here-in-after.

All as per Item Ser No. 167 above but for 12 module complete all as specified as directed. Cat No. 673262, Make: Legrand or equivalent model of Makes specified in PS here-in-after.

Supply & fixing blanking plate 1 module complete all as specified and directed. Cat No. 673262, Make: Legrand or equivalent model of Makes specified in PS here-in-after.

Material and labour for sub-main wiring (Concealed type) with FRLSH two run of PVC insulated, unsheathed, single core, multistranded copper conductors of size 6.0 Sq mm and one run of 6.0 Sqmm copper conductor as continuity earth wire, drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site all and taking down old sub main wiring with conduit complete all as specified and directed. (Note: Three run of 6.0sqmm copper conductor+One run PVC conduit shall measured as one unit i.e RM)

Material and labour for sub-main wiring (Concealed type) with FRLS two run of PVC insulated, unsheathed, single core, multistranded copper conductors of size 4.0 Sq mm and one run of 4.0 Sqmm copper conductor as continuity earth wire, drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site all and taking down old sub main wiring with conduit complete all as specified and directed. (Note:Three run of 4.0sqmm copper conductor+One run PVC conduit shall measured as one unit i.e RM)

Supply and fix of 4 way vertical type TPN DB in double door suitable for four pole MCCB as incomer including make good of damaged surface/wall including re-connection with existing earth wire to DB incuding taking out the old unserviceable one complete all as specified and as directed. Cat No. 507745 Make: Legrand or equivalent model of Makes specified in PS here-in-after. Note:- MCCB shall be measured and paid separately.

Supply and fix MCCB four pole 63 amps, 415 volts, 16 KA, with all incoming / outgoing connections suitable for fix 4 way vertical type TPN DB in double door twith proper size of aluminium lugs complete all as specified as directed. Cat No. 420013, Make: Legrand or equivalent model of Makes specified in PS here-in-after.

Supply and fix powder coated sheet metal enclosure single pole & neutral for DBs (Double door) 8 way with rated busbar DIN channel, neutral link & earth link superline including taking down old unserviceable enclosure one complete all as specified as directed. Cat No.507611, Make: Legrand or equivalent model of Makes specified in PS here-in-after.

Supply and fix MCB single pole & neutral 40 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified as directed. Cat No.408618 Make: Legrand or equivalent model of Makes specified in PS here-in-after.

Supply and fix MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed. Cat No.408587-95, Make: Legrand or equivalent model of Makes specified in PS here-in-after.

S&F LED tube light fitting, 1 x 20 watt, 4 feet, 220 volt AC decorative type with driver holder and led lamp including connecting up with three core flexible cable copper conductor including taking down old unserviceable light fitting complete all as specified and directed.

S&F LED tube light fitting, 1 x 10 watt, 2 feet, 220 volt AC decorative type with driver holder and led lamp including connecting up with three core flexible cable copper conductor including taking down old unserviceable light fitting complete all as specified and directed. Model: LUMILINE PLUS NEO, Make: Havells or equivalent model of Makes specified in PS here-in-after.

Supply and fix LED building security light fitting 25 watt energy saving versatile pressure die-cast aluminium IP65 building security luminaire with suitable GI bracket complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete all as specified and directed. Cat No. ENDURA SUNBEAM of Havells or equivalent model of Makes specified in PS here-in-after.

Supply and fix LED bulb two pin (Base type B22) 7 watt complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 230 CFM BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V, 50 Hz, of 230mm sweep with, blades, frame and louvers complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V, 50 Hz, of 300mm sweep with, blades, frame and louvers complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating elment upto 2 KW, capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as speciifed and directed. Make: Havells/V-Guard/Crompton

Supply and fix 2 ft x 2 ft recess/surface mounted luminaire suitable for grid ceilling /suspended from ceiling complete with electronic driver for 35 / 36 W LED luminarries and including 35 / 36 W LED Lamp duly pre wired complete with all acessories inculding connection with flexible twin core copper conductor of size 23/0.0076 mm complete all as specified and as directed.

M&L for chases cutting in brick/ stone/ concrete surfaces girth, exc. 10cm and not exc. 20cm for concealed wiring and the like, making the surface good to match the existing in CM 1:3 etc. complete all as specified and directed.

Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) for watering and connected to control switch as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 150mm C/C both way and two Nos lifting handle made of 8mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete and as specified in electrical plate No 3 of SSR Pt I complete all as specified as directed.

Supply and fix GI wire as earth continuity conductor complete all as specified and as directed.

Supply and fix GI pipe 15 mm bore (dia), light-grade for protection of earth electrode complete all as directed and as specified.

S&F LED tube light fitting, 1 x 18 watt 220v AC decorative box type with driver holder including LED tube light connecting up with three core flexible copper conductor cable with sutiable size from ceiling rose complete all as specified & directed.

S&F LED Blub 10 watt Self Ballasted Retrofit type lamp with PBT body shell and DC Diffuser CCT 6500 K with fitting complete all as specified and directed.

S&F in repair single pole and neutral DB wall mounting type, 240 Volts, 4 Way, double door suitable for fixing MCB's including connecting etc complete all as specified and directed.

Supply and fix MCB single pole & neutral 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified as directed.

S & F LED building security light fitting 35W new generation energy saving and environmental friendly long life LED street light made up of pressure diecast aluminium housing with high power LED as lighting source and lens embedded PC cover having seperate driver compartment with IP65 protection and impact resistance of IK07 including mounting bracket of suitable size complete all as specified and directed.

BHARUKA ENTERPRISES (BID ID -3191973)

DNS CONSTRUCTION COMPANY (BID ID -3192889)

RUNJEN CONSTRUCTION (BID ID -3191799)

PINKY CO. (BID ID -3192678)

PODDAR SALES CORPORATION (BID ID -3190219)

S Majumder and Construction (BID ID -3191260)

J. D. CONSTRUCTION (BID ID -3193197)