SPECIAL REPAIR TO DRAIN OF 92BH, PROVN OF DRAIN BETWEEN AFM TO BLDG NO B-47, DRAINAGE SYSTEM AT CERTAIN LOCATIONS, ROOF COVERING AND DRAIN AT BLDG NO P-85 AND EXTENSION OF CORRIDOR INCLUDING STERLIZATION ROOM AT 15CPU AT BB CANTT SRINAGAR

Amount

Taking down cement plaster of any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor and paving n.exc 15 cm thickness below or above ground level complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in sub floor finished rough to receive topping layer complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (sqare/ rectanglear) area of each tile exc 0.18 sqm but n.exc 0.38 Sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in Cement mortar (1:4) complete all as specified and directed.

M&L PCC in foundation filling and mass concrete type D-2(1:4:8 ) 40 mm graded stone aggregate complete all as specified and directed.

Making good to road with PCC 1:3:6 after laying of RCC hume pipe as in foundations, filling and mass concrete type C2 (1:3:6) using 40mm graded stone aggregate complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surfaces 450mm x 350mm x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering as in skirting in Cement mortar 1:4 complete all as specified and directed.

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth and getting out in hard/dence soil complete all as specified and directed.

Demolition & breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in CM Internal dia of pipe 200 mm complete all as specified and directed.

M&L PCC in foundations, filling and mass-concrete type C2 (1:3:6) using 40 mm graded stone aggregate complete all as specified and directed.

Supply and laying of RCC hume pipe 450mm dia class NP-2 laid and jointed complete with collars complete all as specified and directed.

M&L Concrete bed to 450mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid & tested; in PCC (1:4:8) complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil. complete all as specified and directed.

Removing excavated soil n exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. laid, bedded & pointed in any mortar complete all as specified and directed.

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement & pigment over 15mm thick screed in CM(1:6) complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and directed.

M&L Random rubble walling, uncoursed, well bonded, bedded and solidly hearted built in CM (1:4) complete all as specified and directed.

Random rubble walling, uncoursed, well bonded, bedded and solidly hearted built in CM (1:6) except stone complete all as specified and directed.

M&L PCC in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed type B1 (1:2:4) using 20 mm graded aggregate complete all as specified and directed.

M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in CM(1:4) with joints to match complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc complete all as specified and directed..

M&LBrickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished even & smooth (without using extra lime or cement) complete all as specified and directed.

M&L Keyed pointing to random or polygonal rubble, uncoursed or brought upto courses in CM (1:4) complete all as spd and directed.

M&L RCC M-25 design mix using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor & roofs n exc 20 cm wide & sides of RCC/PCC bands in walls, horizintal or sloping & similar work exc 10cm but n exc 20cm wide Roughed finished surface of concrete complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any thickness including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section, in unframed work in any position completeall as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

S&F Galvanised class 2, corrugated steel sheeting 0.63mm thick with two corrugation side lap, fixed with L or J type or cranked hook bolts, in roofs, walls etc complete all as specified and directed.

S&F 0.63mm Plain,galvanised, mild steel sheeting, in ridges, hips, valley gutters,drip and straight flashing(length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed.

M&L 2nd class soft wood clean sawn timber fixed in scantling complete all as specified and directed.

2nd class soft wood clean sawn timber fixed in scantling complete all as specified and directed.(Except Timber)

M&L Brickwork with subclass `B' old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

M&L Brickwork with old size bricks,using old serviceable bricks,as retrieved from dismantling of brick work under respective item, after removing mortar from and cleaning bricks, straight or curved on plan exc 6m mean radius ,built in cement mortar 1:6 complete all as specified and directed.

Racking out joints/pointings to random rubble or polygonal rubble or uncoarsed or brought up to courses and rasied pointing to random rubble or polygonal rubble, uncoursed or brought upto course in cement mortar 1:4 complete all as specified and directed.

S&F rolled mild steel section of angle, tee,flats,and plates as in roof , trusses,purlines,rails,etc and like fixed with angle cleats and connecting plats with welding,upto 4m height, Gde FE-410-0 or FE -310-0 complete all as specified and directed.

M&L Second class soft wood 20mm thick wrought surface as in eaves board, ceiling, soffits and weather boarding etc with 30mm butt/lap joints, complete all as specified and as directed.

All as per item ser No 41 above but except boarding.

Preparation of new wood and wood based surfaces of any description exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

M&L Granite work with 18-20mm thick black slab, table rubbed and polished, in steps, window cills, cooking platforms and like in single piece set in neat cement slurry and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed or bedding layer in cement mortor (1:4) complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D-2 using 40 mm gragded aggregate as in base / sub base complete all as specified and as directed.

M&L Chequered cement concrete tiles hard glazed rubber top 30cmx30cmx25mm thick made using vibratory mechanical system having glazed top layer with mixture of white cement and pigment, set, jointed and pointed in neat cement slurry in floors laid on 20mm thick screed bed in CM (1:6)complete all as specified and directed..

M&L Khatamband pattern false ceiling , design as approved by GE with ornamental wood work made out of Ist class soft wood (deodar) including 12mm thick BWR plywood and finally finishing with french polish (two or more coats) complete all as specified and directed.

S&F rolled mild steel section of angle, tee, flats,and plates as in grating,grills etc and the like fixed with angle cleats and connecting plates Gde FE-410-0 or FE-310-0 complete all as specified and directed.

M&L Precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in cover slab for manhole etc including necessary form work complete all as specified and directed.

S&F PVC(SWR) trap of bore 100/110 mm in dia, complete all as specified and as directed.

S&F PVC (SWR) pipes of 110 mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

M&L Cement concrete in foundations, filling and mass concrete type D2 1:4:8 (40mm graded aggregate), complete all as specified and directed.

All as per item ser No 27 here-in-above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; for fair finished surface, complete all as per specified and directed.

Formwork to edges of concrete slabs, shelves, treads, breaks in floors, window cills and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc. 20cm wide, complete all as specified and directed.

M&L RCC 1:11/2:3 type A-1 (using 20mm graded aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, lintels, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L Rendering 10mm thick plaster in cement mortar 1:6 on fair faces of concrete/brick surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M&L 50mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection finished even & smooth with out using extra cement including making joints 10mm wide and 30mm deep at spacing n more than 2.5m and at corners at mandatory and filled with sealing compound grade A complete all as specified and directed.

S&F Aluminium frame of size 100mm x 44.4mm for doors/windows/partitions powder coated of any colour (thickness or powder coating not less than 50 micron), windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

S&F Aluminium door shutters/partitions of powder coated, with aluminium section weighing 0.55 kg/m, powder coated of any colour (thickness or powder coating not less than 50 micron), including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, mortice locking arrangement, hinges, anodised aluminum snap beading screws etc.; panelled (two panels), filled with 5mm thick PVC sheet manufactured by Rajshree Indore or equivalent or 5.5mm thick frosted glass; fitted with rollers, bottom and upper guide channels, complete all as specified complete all as spd and as directed.

S&F Aluminium sliding window shutters, ventilator shutter of powder coated, side hung type, without sash bars, aluminium sections weighing 0.55 kg/m (thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading to fixind 5.5mm thick frosted or plain glass, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

M&L Plywood 6mm thick grade BWR type BB fixed with screws to timber frame work commercial type as in ceiling/partition, complete all as specified and as directed.

M&L Preparation of newly or previously untreated steel surface exc 10 cm width or girth and applying two coats of synethic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L Preparation of new plastered surfaces by using necessary filling compound of Altek/Birla 3mm white putty to obtain smooth/even finish using sand paper and applying two coats of distemper oil emulsion over a coat of alkali resistant cement based priming paint complete all as specified and directed.

Prepration of new plaster surfaces of wall and applying two coats of cement based paint over a coat of alkali resistant cement base primer on wall surfaces complete all as specified and directed.

Excavation Over areas n. exc. 1.50 m deep and getting out in hard /dense soil 1.5M wide complete all as specified and as directed.

M&L PCC in surface channels and drains type B1 (1:2:4) using 20 mm graded stone aggregate complete all as specified and as directed.

M&L Rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:3) complete all as specified and as directed.

M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:4) in landings, cover slabs (for manholes etc.) chullah hoods,chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and as directed.

Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be ensured under 'Structural Steel') complete all as specified and as directed.

M&L for point wiring complete with PVC insulated and unsheathed, flame retardand low smoke (FRLS) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core in and including rigid PVC surface conduit not less than 19mm dia, clip, with suitable MS terminal boxes (not less than 1.0mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint including earth dolly with 3mm thick plastic laminated sheet top cover of approved colours including 1.50 sqmm green solid copper conductor as continous earth wire with all accessories including lugs required, complete all as specified and directed for the following: (a) One light/fan point controlled by one switch

S&F switch piano flush button type 5 Amp single pole one way complete all as specified and directed

S&F LED light fitting fixture 18W 6000K, decoratie ultra slim with extruded AI, heat sink, environmental friendly. Energy efficient ready to use complete all as specified. Make-Havells Ct Pt No-LHEWEB7PL1W022/ equivalent in SEIMENS.

S & F Ceiling rose three terminals polycaronate, isolated body complete all as specified and directed.

S & F sheet metal enclosured double door for mounting MCBs with 200A rated bus bar 4 way AC 230 Volt with IP-43 protection complete all as specified and directed. Make legrand Cat Part No. 607711 or equivalent in Hager/Havells.

S & F Single Pole MCB 6 to 32 Am p s 240v, 50Hz AC Made form moulded self-extinuishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity and terminal box suitable upto 35sqmm cable complete conforming to IS 8828 of 1996 complete all as specified and directed.

M&L Two single core 4 sqmm size stranded copper conductor PVC insulated unsheathed cable (FRLS) in and including PVC rigid non metallic conduit and one PVC cable 1.5sqmm size solid copper conductor PVC insulated and unsheathed for contineous earth wire with junctions boxed covered with laminated sheet 3 mm thick and other accessories complete all as specified and directed.

M/S SUHEEL CONSTRUCTIONS