SPECIAL REPAIRS TO CERTAIN INTERNAL FINISHES AND ASSOCIATED WORKS OF CERTAIN SAILORS MD ACCN AND ADDITION/ ALTERATION TO SWIMMING POOL CHANGING ROOM AT CHANAKYA BAGH, CHANAKYAPURI

Amount

Demoltion of brick work or stone/boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Dismantling floor or wall tiling including cement mortar bedding (but not backing) and removing rubbish outside MOD land complete all as specified and directed.

Demolittion of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified and directed.

Material and labour for Brick work with sub class 'B' bricks straight or curved on plan exc 6.0 m mean radius built in CM (1:6) complete all as specified and as directed.

Material and labour for Brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and as directed.

M&L providing cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) 25mm thick as in sub floor/sub base for laying floor finishes/ tiles etc

M&L for non skid ceramic tiles 7-8 mm thick coloured(square /rectangular) exc 0.11sqm but not exc 0.18 sqm, in floors set and jointed in neat cement slurry and pointed with white or coloured cement laid over 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces such as skirting and dados of size 300x450x7-8 mm thick, set and jointed in neat cement slurry and pointed with white or coloured cement laid over 10mm thick rendering of cement mortar 1:4 complete all as specified and directed.

M&L for non skid ceramic tiles 7-8 mm thick coloured(square /rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm, in floors set and jointed in neat cement slurry and pointed with white or coloured cement over Screed bed or bedding layer of cement mortar 1:6,15mm thick complete all as specified and directed.

M&L providing cement concrete type E-2, 1:5:10 (40mm graded aggregate) in mass concrete and filling etc complete all as specified and directed.

Excavation in trenches n.exc.1.5 metre wide and n.exc 1.5 metre depth and getting out in soft/loose soil as in foundation complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in hard/dense soil complete all as specified and directed

Material and labour for PCC 1:4:8 type D2 (40 mm graded aggregate ) in foundations, filling and mass concrete complete all as specified and directed.

Demolition and breaking up drain pipes of 100 mm (Salt glazed ware, AC / PVC or Reinforced concrete) set in cement mortar or any description especified or all as specified and directed

Dismantling of 100/75 mm cast iron or reinforced concrete drain pipes, jointed in cement mortar including all fittings and taking out of trenches, if required, complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

Supply and fixing 110 mm PVC (SWR) pipes with wall thickness exc 5 mm single socketed in any length with rubber ring joints fixed to walls or laid in floors including cutting chases and making good and fixed complete in all respect as specified.

Material and labour Concrete bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested in cement conc 1:3:6 type C-2 for 100mm bore of pipe complete all as specified and directed.

Supply and fixing 110 mm PVC (SWR) bends any radius with wall thickness exc 5 mm and fixed complete in all respect as specified and directed.

Supply and fixing 110 mm PVC (SWR) bends any radius with wall thickness exc 5 mm with access door and fixed complete in all respect as specified and directed.

Supply and fixing 110 mm PVC (SWR) branch piece single, with wall thickness exc 5 mm equal or uneqal any radius including access door and fixed complete all as specified and directed.

Supply and fixing PVC (SWR) floor trap for 100mm diameter of outlet, with wall thickness exc 5 mm with stainless steel grating of 100 mm including jointing with solvent cement complete all as specified and directed

Supply and fixing 150mm PTMT Symet Bath assest Grating square hole/without hole fixed in position over Rain Water Pipe/nahani trap with cement slurry complete all as specified and directed.

Supply and fixing MS Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to FE-290 Gde-E-165 complete all as specified and directed.

Material and labour for complete removal of existing treatment from old surfaces of wall and applying two coats of oil bound distemper over a coat of primer and over incl one coat of Birla putty complete all as specified and directed.

Material and labour for complete removal of existing treatment from old surfaces of wall and applying two coats of Exterior Emulsion paint over one coat of primer and over incl one coat of Birla putty complete all as specified and directed.

Prepration of old surface and applying two coat of white wash on Ceiling complete all as specified and directed.

Material and labour for complete removal of existing treatment from old plastered or un-plastered surface of ceiling and applying two coats of oil bound distemper on walls over a coat of primer and over incl one coat of Birla putty complete all as specified and directed.

Prepration old wooden surface of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

Prepration old steel surface of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

Supply and fixing in repairs vitreous china white wash hand basin under counter round of size 450mm dia including cutting in granite slab, fixing completely in position complete all as specified and directed.

Supply and fixing in repairs brass chromium plated 32 mm bore dia waste fittings,for wash hand basin with long screwed shanks and fly nuts, flange end embedded red lead cement and other end fixed complete all as specified and directed.

Supply and fixing in repairs 15mm bore dia Stainless steel finish copper alloy pillar tap (swan neck) for wash hand basin with long screwed shanks and fly nuts screwed for iron pipe and fixed complete in all respect as specified and directed. Make : Jaguar or equivalent.

Supply and fixing in repairs 15 mm dia cast copper alloy chromium plated angle cock with long shank and cup complete in all respect as specified and directed. Make : Jaguar or equivalent

Supply and fixing PVC connection 15 mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete in all respect as specified and directed.

Supply and fixing 32 mm low density polyethylene pipes (LDPE) of pressure rating 6 kg/cm square fixed complete to walls, ceilings or in floors etc all as specified and directed.

Supply and fixing in repairs Vitreous China wash down water closet pan, pedestal pattern, white complete all as specified and directed.

Supply only plastic water closet seat cover,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised device suitable for pedestal pattern white complete all as specified and directed.

Supply and fixing in repairs 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket all as specified and directed.

Supply and fixing brass chromium plated health faucet with one metre long flexible pipe and wall hook, fixed complete in position for pedestal pattern WC all as specified and directed.

Supply and fixing brass chromium plated jet suitable for pedestal pattern water closet along with flexible pipe and fixed with water closet in position with plate and nuts and bolts complete in position all as specified and directed.

Supply and fixing Vitreous China urinal, half stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1`:2 , securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement and including s&f cp brass urinal spreader complete all as specified and directed.

Supply and fixing in repairs brass chromium plated 40 mm bore dia waste fittings,for wash hand basin with long screwed shanks and fly nuts, flange end embedded red lead cement and other end fixed complete all as specified and directed.

Supply and fixing in repairs brass chromium plated urinal spreader heavy duty suitable for half stall urinal fixed with stainless steel screws in position complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

Material and labour for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite in stone including grinding and polishing laid over 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed.

Material and labour for use & waste of form work to soffits of suspended slabs such as roof slab,floor slab complete all as specified and as directed for rough finished surfaces.

M&L for rough finished surfaces, form work to edges of concrete flats, treads, breaks infloors, window cills, concrete railings, openings in concrete walls floor and roofs not exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or slopping and similar work complete all as specified and as directed.

Material and labour providing reinforced Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Material and labour mild steel TMT bar 10 mm dia and over cut to length bent to shape as required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Supply and fixing in repairs chromium plated brass shower rose 125 mm with swivel joint and shower Arm complete in all respect as specified and directed.

Supply and fixing in repairs 15 mm dia cast copper alloy fancy type chromium plated stop cock long shank concealed type complete in all respect as specified and directed.

Taking down chowkhat with shutter (with out taking off shutters from the frame) exc 1.5m Sqm each complete all as specified and directed.

Taking down chowkhat with shutter (with out taking off shutters from the frame) exc 1.5m Sqm but nexc 4.00 sqm each complete all as specified and directed.

Supply and fixing factory made PVC internal door frame manufacture by Raj shree of the size 100x45mm with a wall thickness of 5mm, made out of extruded 5mm thick prelam sheet, mitred cut at two corners and jointed with 2 nos. of 150mm long brackets of 15mmx 15mm MS tube. The two vertical door profiles are to be reinforced with 40mmx20mm MS tube of 19 gauge through out the frame. The door frame shall be fixed to the wall using 65/100mm long MS Screws through the frame by using PVC fastners. A minimum of 4nos of screws to be provided for each vertical member & minimum 2 Nos for horizontal member etc. complete as per manufactures specification and directed.

Supply and fixing 35mm thick factory made solid PVC Moulded door shutter, consisting of solid core single leaf flush door of 30mm thickness, lipped with 15mm(5mmx3) thick 30mm width on the other stiles & bottom rails. The inner panel laminated with 2mm thick termite proof and fire resistant moulded PVC sheet with 2,4 or 6 raised panel design in defferent plain and / OR prelam colours on one side after routing the moulded design on flush door & 2mm th plain and/ OR prelam PVC sheet on the other side using rubber adhesive on flush door & solvent cement adhesive on the PVC lipping etc complete all as specified and directed, manufacture,s specification and drawing.

Supply and fixing aluminium, anoidized barrel tower bolts of extruded section with bright bolts, length of bolt 200mm complete all as specified and directed.

Supply and fixing aluminium handle cast type, anodised of size 150mm complete in all respect and all as specified and directed.

Supply and fixing aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 300mm, bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolts plate and two stapple plate complete inall respect and all as specified and directed.

Supply and fixing Butt hinges medium weight galvanised mild steel and fixed, 100mm size of hinges complete all as specified and directed.

Supply and fixing in repair stain less steel curtain rod 25 mm dia with two nos stainless steel brackets and stainless steel end caps, fixed on wall with nylon sleeves and screws complete all as specified and directed.

Taking up or down 15mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing, cutting/chauging in wall/floor complete all as specified and directed.

Taking up or down 20mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing, cutting/chauging in wall/floor complete in all respect as specified

Supply and fixing 15mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and directed. Make Jindal , TATA, BST

Supply and fixing 20mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and directed. Make Jindal , TATA, BST

Supply and fixing in repairs 15 mm dia brass chromium plated Bib tap fency type chromium plated complete in all respect as specified and directed.

Material and labour for 20mm dia CP finish brass alloy towel rail, 600mm long complete all as specified and directed

Supply and fixing brass chromium plated soap dish complete in all respect as specified and directed.

Supply and fixing in repairs 20mm bore gun matel globe or with iron wheel, screwed both ends for iron pipes fixed complete all as specified and directed.

Supply and fixing 12mm thick toughned frosted/smoked glass door swing both side with self locking vertical spring fitted with necessary fixing arrangement with wall and stainless steel pivot complete in all respect as specified & directed. Make : Modiguard or Saint Gobain.

Supply and fixing Floor spring suitable for glass door complete all as specified and directed.

Supply and fixing in repair floor spring suitable for glass door complete in all respect as specified and directed.

Supply and fixing locking arrangement for glass door both side including necessary cutting in toughned frosted glass and floor complete in all respect as specified and directed.

Supply and fixing stainless steel door handle 450 mm long for toughned glass door including necessary holes in glass complete in all respect as specified & directed.

Supply and fixing powder coated aluminium , door with door frame of 96.6 mmx44.8mmx1.6mm thick and shutter with styles 84mmx44.7mmx1.6mm thick rails 101.6mm x 44.88mm x 1.6mm thick incl 6mm glass of make Modi/Atul and Partly/fully fixed with 12mm thick prelaminated particle board fixed with aluminium snap beading and rubber gasket., The each shutter fitted with 02 Nos tower bolt 200mm, 04 Nos handle and two hydraulic floor spring & mortice lock of approved make complete all as specified and directed.

Material and labour for providing heavy duty solid factory made precast cement concrete manhole cover slab incl reinfoercement and ms frame allround of cover, of any size and description as per requirement on site and directed.

Supply and fixing openable window manufactured from rolled formed sections made of galvanized steel ,colour coated/powder coated (base steel as per IS 513 D quality, galvanized as per IS 277 with Zinc of 120 grams/Sqm), with separate shutters for glass(out side opening) & fly proofing (inside opening ) and MS guard bars in between. The section for the window outer frame (and mullion if required) should be of 72mm X50mm. The Section for glass shutter should be 47mmX20mm, and glass shall be fixed with EDPM gasket all round the glass. The Section for fly proofing should be 40mm X20mm. Thre Section for glazed shutter and fly proofing shutter sholud be cut to length and miter joined with polypropoline corner brackets, mullion joined with frame using nylon cap. Spoon profile should be used around the fly mesh to fix mesh in the mesh shutter.Fly proof mesh shall be of 304 grade stainless steel with 32 gauge steel wire having 144 holes in one suare inch.Glass shall be 5mm thick froasted glass. Guard bars should be provided with 10mm square bars at 100mm centre to centre and welded to Flat iron frame of 12X6mm thick and powder coated and fixed to main frame with screws. Accessories : Each glazed shutter should be provided with SS pivot hinge - one set per shutter , Aluminum powder coated handle-one per shutter. Fly proofing shutter should be provided with SS pivot hinge - one set, ploypropoline handle-one per shutter, 75mm aluminum tower bolt -one per shutter. All the ventilator sections are powder coated with pure polyeaster powder upto 50 microns thickcomplete all as specified and directed. Make- M/s NCL seccolor-Eco 4000 series window/ventilators or equvalent .

Taking down cement plaster on brick walls, raking out joints locking for key, scrubbing down with water etc complete all as specified and directed

Material and labour Polymer modified cementious bonding coat, prepared and applied on the concrete/ masonry surfaces with I part of Styrene Butadiene Rubber latex emulsion (SBR latex) with 4 parts of water and 6 parts of cement by weight.Coverage of SBR latex-0.25Ltr / sqm for one coat complete all as specified and directed.

Material and labour 15 mm thick polymer modified plaster in CM (1:4) on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement all as specified. ( SBR latex shall be measured and paid separately) complete all as specified and directed.

Supply only Styrene Butadiene Rubber latex emulsion complete all as specified and directed.

Material and labour preparation of new plastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of primer and over incl one coat of Birla putty complete all as specified and directed.

Material and labour Preparation of new plastered or un-plastered surface of walls and applying two coats of oil bound distemper on walls over a coat of primer and over incl one coat of Birla putty complete all as specified and directed.

Supply and fixing GI wire netting 0.9mm dia and 12mm mesh lathing to wood or metal studding, joist etc in walls, ceiling stachions, beams etc incl all laps cutting and waste complete all as specified and directed.

Material and labour 10 mm thick polymer modified plaster in CM (1:4) on fair face of brick or concrete surfaces on ceiling finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement all as specified. (SBR latex shall be measured and paid separately) complete all as specified and directed.

Material and labour for Preparation of new plastered or un-plastered surface of ceiling and applying three coats of white wash on ceiling complete all as specified and directed.

Material and labour for Preparation of new plastered or un-plastered surface of ceiling and applying two coats of oil bound distemper on walls over a coat of primer and over incl one coat of Birla putty complete all as specified and directed.

Supply and fixing in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, incl pvc waste pipe and cp waste fitting overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and directed.

Supply and fixing in repairs Stain less steel plate rack made of stainless steel 1mm thick 900mmx 600mm complete all as specified and directed.

Material and labour for disconnecting existing water tanks exc 500 & n.exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. all as specifed and directed.

Supply and fixing in repairs ball valve of PVC (Make Symet/Prayag) complete with aluminium rod with polyster ball for 20 mm dia iron pipe complete all as specified and directed.

Supply and fixing in repairs china water closet Orissa Pan 580 X440mm long pan Ist quality ISI marked with cast iron 'P' or 'S' trap including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete in all respect as specified and directed. (Make: CERA, Hind ware, Parryware)

Taking down shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed

Ditto item 94 above but nexc 1.00 sqm each and ditto

Supply and fixing 35mm thick 2nd class glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc(with out sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a) complete all as specified and directed.

Supply and fixing 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides,supplied and fitted to chowkats complete all as specified and directed.

Supply and fixing MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hook s and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, Fe 410-W (Gde-E-250) quality complete all as specified and directed.

Material and labour Providing cement concrete type B-I,1:2:4(20mm graded agg) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028 , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

Supply and fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fixing in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Material and labour running welding in repairs exc 2.5 cm length but n.exc 5 cm (thickness of metal to be welded n.exc 6 mm) complete all as specified and directed.

Supply and fixing 18 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work incl teak wood edging all round the shutter/shelves etc and polishing the edging as in cub boards shelves and shutter etc complete all as specified and directed.

Supply and fixing Continuous (piano) hinges,mild steel, bright finish or electrogalvanised, width of flaps 40mm (when open) complete all as specified and directed.

Supply and fixing aluminium handles cast type anodised 100 mm size of handle complete all as specified and directed.

Supply and fixing floor door stopper of alumium alloy body with double legs and 100mm long fixed with screws to shutters complete all as specified and directed.

Supply and fixing in repairs floor door stopper of alumium alloy body with double legs and 100mm long fixed with screws to shutters complete all as specified and directed.

Supply and fixing aluminium anodized hasp & staple of 100 mm size safety type complete all as specified and directed.

Supply and fixing Aluminium anodised wire gauzed window frame 63.50mm x 38mm x 1.6mm & guide Rail of Jindal section No.20956, 20966 and shutter of section No.20567, 20577 & 20576 sliding type including stain less steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed together with aluminium anodised mesh 100x100x1.0mm thick fixed with rubber and aluminium beading and aluminium hardware fittings complete all as specified and directed.

Supply and fixing Alum anodised grill made of 6mm dia aluminium bars, size of mesh 100mm by 100mm fixed together with aluminium U channel thick all round the grill complete fixed in position all as specified and directed

Dismantling of brick tiles single layer on roofs complete all as specified and directed.

Demolition of mud in roofs,any thickness complete all as specified and directed.

Material and labour Providing cement concrete type B-I,1:2:4(20mm graded agg) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028 , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

(a) Material and labour cleaning the surface, remoive dust dirt, loose particles and unsound substrate and providing 20mm thick cement screed (1:4) mixed with Dr Fixit STP tonic liquid 200 gram/Bag over Dr Fixit bonding coat MPB complete all as specified and directed. (b) Applying primer coat with solvent based bitumen primer @ 3.50 ltr/XSqm.(c) Align Dr Fixit/STP torch shield water proofing 3mm thick membrance using gas burner to heat substrate, pressing firmly from lower end to upper end with 100mm over lap.(d) Heat both overlap with round trowel to seal over lap excess compound smoothened,pressed into seam using hot trowel.(e) Seal edges well into grooves & protect with CM 1:2 complete all as specified and directed.

Material and labour pre cast PCC plain tile of size 300x300x20mm machine made laid over & & including cement mortar screed 15mm thick in CM 1:6 mixed with water proofing compound and jointed pointed in CM 1:3 mixed with 5% crude oil by weight of cement complete all as specified and directed.

Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fittings such as ceiling rose, pendent holders, regulators and socket point etc and making good the disturbed surface & wall/ floor complete all as specified and directed.

M&L of point wiring with PVC FRLS insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded copper conductor of size 1.5 sqmm as earth continuity conductor connected to common earth dolly, in existing conduits and its accessories, including replacement of factory made steel boxes suitable for modular switch/sockets including modular plates of suitable size as per site requiremnt for the following. Make:-Polycab/Havells/RR Note:if Cutting & chashing required shall be measured/paid under relevant items.

One light/fan/exhaust fan point controlled by one nos, one way switch complete all as specified and directed.

One three pin 5 Amp socket outlet point controlled by one no, one way switch on independent board complete all as specified and directed.

One three pin 5 Amp socket outlet point controlled by one no, one way switch on same board complete all as specified and directed.

All as per item No. 118.00 here in before but with 2.5 sqmm (for phase, neutral) and 1.5 sqmm (for continuous earth wire) cable for one 15/16 amp socket out let point on independent board complete all as specified and directed.

Supply and fixing of Modular switch 6 amps 250 V AC one way with ISI mark including 6 amps switch frame complete all as specified and directed. Make:-Indoasian/Havells/Legrand

Supply and fixing of modular switch 16 A SP one way 240 volts complete all as specified and directed. Make:-Indoasian/Havells/Legrand

Supply and fixing modular socket 6 A Multi socket for 2 pin and 3 pin 240 volts complete all as specified and directed. Make:-Indoasian/Havells/Legrand

Supply and fixing of modular socket outlet 16 A-6 pin combined 240 volts complete all as specified and directed. Make:-Indoasian/Havells/Legrand

Material and labour in replacement of point wiring with FRLS PVC insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded copper conductor of size 1.5 sqmm as earth continuity conductor connected to common earth dolly, in and including PVC concealed conduit 20 mm dia medium grade ISI marked and its accessories, provn of new galvanised MS sunken box and new hylum sheet 3 mm thick of suitable size, ISI marked for housing the switches and sockets, for the following complete all as specified and directed :- Make:-RR/POLYCAB/HAVELLS

One light/fan/exhaust fan point controlled by one nos, one way switch.

One light point controlled by one nos of two way switch.

One bell / buzzer point controlled by one bell push

One three pin 5 Amp socket outlet point controlled by one no, one way switch on independent board

One three pin 5 Amp socket outlet point controlled by one no, one way switch on same board

All as per item No. 124.00 here in before but with 2.5 sqmm (for phase, neutral) and 1.5 sqmm (for continuous earth wire) cable for one 15/16 amp socket out let point on independent board complete all as specified and directed.

All as per item No 124.00 above but point wiring with 4 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core cable on independent circuit complete all as specified and directed.

Supply and fixing in replacement of switch, piano type,flush mounted 230/250 volts grade, on top covers (catered in point wiring above) complete all as specified and directed.:-

Single pole, one way piano type,flush mounted switch, 5 Amp rating. Make:-Anchor/cona/indoasian

Supply and fixing bell push 6A with Neon flush type 240 volts. Make:-Anchor/cona/indoasian

Single pole, two way,piano type, flush mounted switch,5 Amp rating. Make:-Anchor/cona/indoasian

Single pole, one way,piano type,flush mounted switch,15 Amp rating. Make:-Anchor/cona/indoasian

Supply and fixing in replacement of socket outlet, multipurpose type, non-shuttered, non-interlocking, flush mounting type, 230/250 volts grade on top covers (catered in point wiring above) complete all as specified and directed :-

3 Pin 5 Amp socket outlet (with 2 pin outlet also). Make:-Anchor/cona/indoasian

5 Pin 15 Amp & 5 Amp multipurpose socket outlet. Make:-Anchor/cona/indoasian

Supply and fixing plug metal clad single pole & neutral with a 2 pin & earth plug and socket complete with MCB SP 20 Amp, 230 volts complete all as specified and directed. Make:-Havells/indoasian/Legrand

Supply and fixing plug metal clad single pole & neutral with a 2 pin & earth plug and socket complete with MCB SP 10 Amp, 230 volts complete all as specified and directed. Make:-Legrand/Havells/Indoasian

Disconnecting mains connection and taking out old sub main wiring two single core 4/6 sq mm and one single core 4/6 sq mm aluminum conductor cable from the concealed conduit from the wall or ceiling and making good to surface complete all as specified and directed.

Material and labour in replacement of submain wiring with PVC insulated unsheathed copper conductor multi stranded 1100V grade heavy duty 2 x 6 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 6 Sqmm PVC insulated unsheathed copper conductor multi sranded cable for continuous earth wire and duly connected to common earth dolly all as specified and directed (The specified runs of single core cables and specified runs of earth continuity conductors and the relevant conduit with accessories shall be measured as one run length). MAKE:-RR/Polycab/Havells.

Supply and fixing in replacment of ceiling rose 3 terminal / PVC/ Polycarbonate, insulated body ISI Marked.

Disconnecting mains connection and taking out old distribution board 8/12 way SPN with 200 amp rated bus bar.

Supply and fixing in replacment of factory made, sheet steel distribution boards,SPN 8 ways. double door, suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar complete all as specified and directed. Make:Legrand/Indoasian/Havells.

Supply and fixing in replacment of MCBs, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed :- Note : Make of the MCB should be the same as that of DB.

MCB SP 6 to 32 Amps Make:Legrand/Indoasian/Havells

MCB SPN 40-63 Amps Make:Legrand/Indoasian/Havells

Supply and fixing LED Tube Light of 20Watt 230Volt(size 4 ft) , box type complete with LED Tube Light 20 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified and directed. Make-CG cat part no.-LCTL-18-CDL, Bajaj Cat Part No BLRB-DB218 or equivalent in make.

Supply and fixing in replacement LED Tube light fitting 10 watt ( 2 ft ) white 230 Volt AC complete including connecting up with three core twisted flexible copper conductorr cable all as specified and directed. Make CG Cat Part No LCTL-9-CDL, Havells Cat part No LHEXBLP7UN1W009, Bajaj Cat Part No BCLSB10WH, crompton cat part no-LTT8-8

Supply and fixing in replacement LED fitting surface mounted 36 watt ( 1X 4ft ) white 230 Volt AC complete including connecting up with three core twisted flexible copper conductorr cable all as specified and directed. Make : CG Cat Part No LCTLSN-40-CDL(1X4),Or equivalent in Havells/philips

Supply and fixing LED Bulkhead fitting of 10Watt 230Volt , complete with LED e Light 10 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified and directed. Make-CG cat part no.-LBHP-10-CDL, equivalent in Havells/Philips.

Supply and fixing LED Mirror light of 3.6 Watt 230Volt ,chrome colour complete with E14 lamp base & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified and directed. Make-Philips cat part no.-34034/14/86 or equivalent in CG/HAVELLS .

Material and labour for taking down of ceiling fan of any size and servicing complete, greesing, painting ,changing of ball bearing of any type,Copper rewinding (if required)and marking of MES No. etc at site and refixing complete all as specified and directed.

Supply and fixing stepped type electronic fan regulator flush type on the existing phenolic laminated sheet, etc.complete all as specified and directed. Make:-Anchor/cona/indoasian.

Material and labour for taking down of exhaust fan of any size and servicing complete, greesing, painting ,changing of ball bearing of any type,Copper rewinding (if required)and marking of MES No. etc at site and refixing complete all as specified and directed.

Supply and fixing electric bell AC 230 Volt complete all as specified and directed. Make:-Anchor/cona/indoasian

BEHAL TRADERS

B S R Enterprises