Construction of Indoor Sports Hall at Shalinar, Arigam, Budgam.

Amount

Earth work in excavation in trenches by mechanical/ manual meansfor foundation drains pipes etc. not exceeding 1.5 Mtr in width upto required depth (all kinds of strata) incl. dewatering of trenches if required during execution and disposal of excavated earth beyond 50 Mtrs or as directed by Incharge Engineer at sie, disposed earth is to be levelled and neatly dressed.

Supply and laying of stone soling (hand packed ) in trenches of foundation incl. consolidation watering and ramming and all consequential and incidental costs like all leads, lifts , carriages etc complete job.

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering. But Incl. consequential and incidental costs like all carriages, octroi, lavies etc complete job.

a) 1:4:8 mix ( 1 cement: 4 coarse sand: 8 graded stone crushed aggregate 40 mm nominal size)

b) 1:3:6 mix ( 1 cement: 3 coarse sand: 6 graded stone crushed aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete in 1:1.5:3 (1 cement :1.5 Course sand: 3 graded stone crushed agg. 20mm nominal size) excluding the cost of centering,shuttering, finishing and reinforcement but including cost and carriages of all materials involved.

In Foundations & plinth

In Columns upto floor 5 level. incld. all consequential and incidental costs like all leads, lifts, carriages scaffolding and curring etc complete job.

In beams Suspended floors, landings, shelves, chajjas, lintels, bounds, plain window sills etc. upto floor 5 level incld. all consequential and incidental costs like all leads, lifts, carriages, scaffolding and curring etc complete job.

Centering and shuttering incl. strutting, propping etc and removal of forms incld. all consequential and incidental costs like all leads, lifts, carriages and scaffolding etc complete job. for:

foundations, footings, bases of cloumns, etc

Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12mm thick, upto floor 5 level.

Suspended floors, landings, balconies and access platform with water proof ply 12mm thick, upto floor 5 level.

Stairs cases with water proof ply 12mm thick, upto floor 5 level.

Columns using 12mm thick waterproof ply

Filling available excavated earth in trenches, plinth sides of foundation/ depressions of ground etc in layers not exceeding 20cm in depth, consolidating each layer by ramming and watering, lead upto 50 mtrs lift upto 1.5 mtrs.

Reinforcement for RCC work incl. straightening,cutting, placing in position and binding all complete. Fe.500 Grade (conforming to IS:1786-1985) upto floor 5 level. incld. all consequential and incidental costs like all leads, lifts, carriages and scaffolding etc complete job.

supply and filling of GSB (nallah Muck/ river bed material) under floors (aggregrate size not exceeding 90mm incl. ramming, watering, dressing and carriages complete .

Brick work with common burnt clay F.P.S (non-modular) bricks of class designation 75 in superstructure above plinth level upto floor V level in 1:6 mix ( 1 cement : 6 course sand) mortar incld. all consequential and incidental costs like all leads, lifts, carriages , scaffolding and curing complete job.

Providing and fixing polyurethane insulated PUF panels in walls, partitions and in ceilings of following thickness, sandwich panels shall be made out of 0.5/0.5 mm thick PPGI precoated sheet on both sides of PU foam, PUF panels shall be jointed with toungue and goove properly sealed with the help of expanding PU foam must be CFC free, self extinguishing fire retardant type having density a of 40 Kgs per cum + 2 kg thermal coductivity @ 100 C, 0.02 W/Mo K all gaps ends and corners shall be covered by 0.5mm thick precoated flashings so that PUF or joint etc are not visible from inside and out side. the PUF panel shall be fixed with frame/structure with the help of SS screws, nuts, bolts or any other approved fixing arrangement complete in all respect, as per drawings, design and directions of Engineer Incharge.incld. all consequential and incidental costs like all leads, lifts, carriages and scaffolding complete job. A) 50mm thick

Providing and fixing polyurethane insulated PUF panels in walls, partitions and in ceilings of following thickness, sandwich panels shall be made out of 0.5/0.5 mm thick PPGI precoated sheet on both sides of PU foam, PUF panels shall be jointed with toungue and goove properly sealed with the help of expanding PU foam must be CFC free, self extinguishing fire retardant type having density a of 40 Kgs per cum + 2 kg thermal coductivity @ 100 C, 0.02 W/Mo K all gaps ends and corners shall be covered by 0.5mm thick precoated flashings so that PUF or joint etc are not visible from inside and out side. the PUF panel shall be fixed with frame/structure with the help of SS screws, nuts, bolts or any other approved fixing arrangement complete in all respect, as per drawings, design and directions of Engineer Incharge.incld. all consequential and incidental costs like all leads, lifts, carriages and scaffolding complete job. A) 100mm thick

Structural steel work welded in built up section, trusses and framed work incl. cutting, hoisting, fixing in position and applying steel priming coat of approved brand incld. all consequential and incidental costs like all leads, lifts, carriages , scaffolding and etectrical charges complete job (upto floor V-level).

Providing and fixing high rib precoated galvalume profile sheets 0.53mm TCT having a crest height of 28-32mm at 195mm pitch and effective width of 975-1000mm and length to suit site requirement to the purlins using self drilling and self tapping fastners of reputed make and fixing flashings, valleys and ridges of colour coated galvalume plain sheet using self drilling and self tapping fasteners of reputed make complete and as directed. the contractor shall have to provide a minimum 5 years warantee for sheets against deterioration, disintegrations loss of luster, variation in colour shade etc. and leakages across laps, fasteners etc. all types of steel sheets shall be load tested to satisfy 1.10 times the design wind load and coating thickness to the satisfaction of the Engineer-In-Charge. The constractor is to submit design and shop drawings for approval on the sheet profile, design and fabrication details before installation (incld. all consequential and incidental costs like all leads, lifts, carriages , scaffolding and etectrical charges complete job.)

Galvalume corner sections at required places

50mm thick cement concrete flooring in 1:2:4 ( 1 cement ; 2 coarse sand : 4 graded stone crushed agg. 20mm nominal size) finished with a floating coat of neat cement slurry incl. all cost and complete

15 mm cement plaster on the rough side of single or half brick wall / concrete in 1:6 ( 1 cement : 6 fine sand)incl. (upto floor V level)incld. all consequential and incidental costs like all leads, lifts, carriages, scaffolding and curring etc complete job.

12 mm cement plaster in 1:4 ( 1 cement : 4 fine sand) on ceiling/beams etc incl. (upto floor V level)incld. all consequential and incidental costs like all leads, lifts, carriages scaffolding and curring etc complete job.

Providing and applying white cement based putty of avrage thickness 2mm, of approved brand and manufacturer (Birla White or equivalent) over the plastered wall / ceiling surface to prepare the surface even and smooth incld. all consequential and incidental costs like all leads, lifts, carriages and scaffolding etc complete job.

Providing and fixing vitrified floor tiles 60x60 cm in size (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make colours and shades laid on 20mm thick cement mortar 1:4 (1 cement: 4 course sand) incl. grouting the joints with white cement and matching pigments etc complete.

P/F 1st quality ceramic glazed tiles of size 600x300mm confirming to IS 13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, KAJARIA in all colour shades as approved by engineer In charge in walls, steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3Kg or Sqm incl. Pointing in white cement with pigment and matching shades

Providing /fixing gang saw granite stone flooring with 18mm thick marble stone (sample of Granite shall be approved by Engineer Incharge) over 20mm thick base of cement mortar 1:4 (1 cement : 4 course Sand) laid and jointed with cement slurry including rubbing and polishing complete. (granite of approved colour and shade) finished work is to be measured incl moulding on the edges.

Finishing with epoxy paint (two or more coats ) at all locations prepared and applied as per manufacturers specifications incl. approprate priming coat including preparation of surface, etc (upto floor V level)incld. all consequential and incidental costs like all leads, lifts, carriages and scaffolding etc complete job.

Providing and fixing extruded German profile U-PVC sliding Door system in white colour, frame 62+2mmx52+2mm with 1.25mm G.I U section reinforcement with rubber gasket of gray / black colour, including fixed fiber mesh jali (Whereever Required) of gray colour with jali frame section 30+2mm x50+2 mm, and fitted glass 5mm thick hermitically scaled unit . The doors will be having 50% area dedicated to fixed glass and 50% fixed with 12 mm thick laminated board pannels as per design and with 5mm glass pannels (whereever required )(with welded corners ) complete at site. The complete assembly will be having ten years warranty against weathering of profiles and one year warrenty on hardware fittings . (As per Sample)

B) Providing and fixing extruded German profile U-PVC sliding window system in white colour, frame 62+2mmx52+2mm with 1.25mm G.I U section reinforcement with rubber gasket of gray / black colour, including fixed fiber mesh jali of gray colour with jali frame section 30+2mm x50+2 mm, and fitted glass 5mm thick hermitically scaled unit . The windows will be having 50% area dedicated to fixed glass and 50% for sliding shutter with fiber mesh and frames the complete assembly will be having ten years warranty against weathering of profiles and one year warrenty on hardware fittings . (As per Sample)

With float glass panes of 5mm thickness (weight not less than 10 kg /sqm)

With float glass panes of 4mm thickness (weight not less than 10 kg /sqm)

Providing and fixing of 12mm thick toughened glass fixed with necessary stainless steel spider fittings and cleats with necessary screws/fasteners complete with silicon jointing at edges and joints complete

P/F of following Aluminium powder coated fittings incl. all necessary screws, nuts, bolts and washers ietc complete job.

Round shaped handle (100mm long)

Tower Bolt (100 x 12) mm thick

I Hooks (powder coated) of required size.

providing and fixing of anodised alluminium fittings ISI marked (Anedic coating not less than grade AC 10 as per IS: 1868) transparent of dyed to required color or shade with necessary screws etc for door fittings A) Tower bolt 150x12mm

Handles 150mm long ISI mark

Sliding door bolt (L-Drop) 200 - 300mm long of link or equivalent make

Supply anf fixing of asbestos free FIBRE Cement board made from homegenous mixture of protaland cement, treated cellulose fibre, finely grounded silca quartz and other materials (Everest or equivalent) sample to be approved by the engineer incharge, including necessary frame work of alluminium extruded built up standard tubular sections (40mm x 65mm section), frame mesh not less than 600mm x 1200mm, fixed with dash fasterners of required dia and size including necessary filling of gaps at junctions/top bottom and sides including all consequential and incidental cost like all leads lifts carriages and scaffolding.

P&F in position stainless steel, (grade 304) railing made of hollow tubes, channels, plates etc. incl. welding, grinding, buffing, polishing, making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete incl. fixing the railing with necessary accessories and stainless dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the sides of waist slab with suitable arrangement as per approval of engineer incharge incl. stainless steel ornamental King Post as per requirement.

Providing, fabricating and fixing of aluminium composite panneil (ACP) Alistine or equivalent brand of approved patern and design and colour as per the directions of Engineer incharge including alluminum frame work with extruded built up standard tubular section 25mmx40mm of approved make (jindal or equivalent) conforming of IS:733 and IS: 1285 3mm thick fixed to steel truss members with necessary fastening arrangements complete. For Eaves and Soffits( incl scaffolding upto any height)

Providing, fabricating and fixing of aluminium composite panneil (ACP) Alistine or equivalent brand of approved patern and design and colour as per the directions of Engineer incharge including alluminum frame work with extruded built up standard tubular section 25mmx40mm of approved make (jindal or equivalent) conforming of IS:733 and IS: 1285 3mm thick fixed to steel truss members with necessary fastening arrangements complete. For Eaves and Soffits( incl scaffolding upto any height)

p/f glass strips for c.c flooring

P/finishing walls with water proof cement primer

Sanitary Fittings and disposal system providing PPR concealed pipes with PPR fittings, clamps cutting chases and making good the wall (Thermax).

25mm dia nominal bore incl elbow,socket & Tee

20mm dia nominal bore incl elbow,socket & Tee

15mm dia nominal bore incl elbow,socket & Tee

P/F of PPR union fittings of standard quality and make(thermax) including jointing/ testing complete

25mm Dia

20mm Dia

15mm Dia

tank nipples 25mm/20 mm

P/F of following PVC pipes & fittings of standard quality & make (B type) Prince or equivalent incl. jointing/testing complete

100mm Dia

75mm Dia

50mm Dia

Door Junction (100mm x100mmx75mm ) = 12Nos ( 100x100x100)mm = 8 Nos

Door Bend (75mm)

Floor Trap (100mm)

collar 100mm with rubber washer

collar 75mm with rubber washer

cowl 75mm size

door bend100mm

100 mm/75mm ofset

Reduser 100mm to 75 mm

holding cliffs 100 mm

Plain TEE 75 mm/100mm

Plain bend 50mm

cliffs 75 mm

plain bend 75 mm/100mm

50mm tee

Providing and fixing of gun metal gate value with C.I wheel of approved quality (ISI mark)

25mm bore

20mm bore

Construction of brick masonary inspection Chamber (450x450)mm inside depth 600mm in brick work in cement mortar 1:4 mix, RCC top slab with 1:2:4 mix, foundation concrete in 1:4:8 mix, inside plastering 12mm thick in cement mortar 1:3 mix with floating coat of neat cement and making channels complete, including cost of manhole frame and Cover of required size of stanard quality and carriage of all materials involved complete.

P/F of water closet squarting pan (W.C) Indian Type Orrisa pattern white vitereous china with 100mm pvc "B type" P or S trap, 10 litre capacity low level flushing cistern of approved make with flush pipe, manually controlled device (handle Lever) with all fittings and fixtures complete, incl. cutting and making good the walls and floors whenever required (580x440mm with intergal type foot rest)

Providing and fixing white vitreous china pedestal type water closet of approved quality (European lype W.C Pan) with seat and lid, 10 litres low level white PVC flushing cistern, including flush pipe with manually controlled device (handle ever) with all fittings and fistures complete including cutting and making good the walls and floors whenever required (W.C Pan ISI makred white solid plastic seat and cover)

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm size respectively with automatic flushing cistern with C.I/M.S brackets standard size of G.I. Clamps complete, including painting of fittings and brackets cutting and making good the walls and floors wherever required. (one urinal basin with 5 litres PVC white automatic flushing cistern of approved quality)

Providing and fixing white vitreous china wash basin size 630x 450 mm with pedestal of approved make C.P brass basin mixer (Jaquar/Parkoo or equivalent make), including painting of fittings and brackets, cutting and making good the wall.whenever required.

Providing and fixing white vitrious counter basin 450x450mm with CP Brass waste 32mm dia and waste pipe to be fixed on the granite counter (excluding cost of granite which shall be paid seperately)

P/F C.P brass fittings of standard quality and make (Jaquar or equivalent)

Bib Cock with base cups (long nose)

Angle Valve

Basin mixer

Shower Rose

Health Focit with holder

Soap dish

Floor Grating (100mm)

Toilet Paper holder

Towel rail of required size

(15mm nominal bore) PVC connection of approved quality and required length

Pvc waste pipe for counter basin/wash basin (32mm)

P/F of looking mirror of superior glass (of approved quality), rectangular size ( 450x350)mm with plastic moulded frame of approved make and shade with 6mm thick hard board backing.

Providing and fixing 600x120x5 mm glass shelf with edges round supported on anodised aluminium angle frame with C.P brass brackets and gaurd rail complete fixed with 40mm long screws, rawl plugs etc complete

P/F of approved quality and make 50 litres capacity gyser (Venus or equivalent) including all necessary fittings nuts bolts and C.P tubes complete.

Providing and fixing in position polythylene septic tank type-B (Comfort or equivalent) having capacity for 20 users, 47"x51"x119" inches in size, including excavation of put as per the size, providing and laying of 150mm thick bed concrete in 1:4:8 mix (1: cement :4 Course Sand : 8 graded stone agg. 20mm nominal size) filling the septic tank with fresh water, connecting the inlet and outlet with the septic lank and filling the dry course of sand and bajre arround the septic tank complete job including carriage of all materials involved.

Earthwork in excavation by manual means in trenches/ septic tank/ soakage pits, incl. disposal of excavated earth beyond the site, disposed earth is to be leveled and neatly dressed incl. dewatering of trenches during execution. (if required).

Dry random rubble masonry with hard stone in foundation and plinth using quarry stone with bond stones incl. carriage of stones.

Providing and laying of re-inforced cement concrete work in 1:2:4 mix (1 cement : 2 Course Sand : 4 graded stone agg. 20mm nominal size crushed stone agg) excluding cost of centering, shuttering and reinforcement but incl. carriage of all materials.

Providing and fixing water storage tanks with PVC lid having locking arrangement (Triple layer) of approved quality (Sintex or equivalent) including making inlet, outlet and overflow connections.

P/F of water pump 1.02 HP (mono black type) kirloskar/crumption greeves or equivalent make incl. cost of fittings & electrical cabling etc.

Supply, installation, testing and commissioning of branded pre-fibricated L.T distribution boards of LEGRANDS or equivallent make for 1 No. 100 Amp DP MCB, 10 No. 32-40 MCB's 24 No. 10-12 MCB;s, 24 Hour programmable digital meter including cost of inter company fabricated bushar system complete.

supply, installation, testing and commissioing of ChANGE OVER switch on load 200 AMP 4 pole. The cost includes cable termination box for both ends fitted of M.S pedestals.

Supply installation, testing & commissioning of the following accessories/equipments to be fitted in LT panel & distribution borad

200 Amp MCB TPN (Havells/SSK/Legrand or make)

63 Amp MCB TP (Havells/SSK/Legrand or make)

100 Amp MCB DP (Havells/SSK/Legrand or make)

32-40 MCB DP (Havells/SSK/Legrand or make)

10-25 MCB SP (Havells/SSK/Legrand or make)

CAPLING supply, laying, testing and commissioning insulated armoured cable in ground, walls, ceiling, trenches etc. complete with clamps, saddle, cable tags, markers, sand tile/brick etc for refilling of trenches 3.5 core 95mm. Of approved quality and make.

supply, laying, testing and commissioning insulated multistrand copper wire 16mm thick of approved quality and make in ground, walls, ceiling, trenchs, inconduitsetc complete with clamps, saddle, cable tags, markers, sand and brick fill etc. for refiling of trenches and cost of necessary PVC conduit wherever needed incl. making wire termination.

supply, laying, testing and commissioning insulated multistrand copper wire 6mm thick of approved quality and make in ground, walls, ceiling, trenchs, inconduits etc complete with clamps, saddle, cable tags, markers, sand and brick fill etc. for refiling of trenches and cost of necessary PVC conduit wherever needed incl. making wire termination.

EARTHING STATION supply and prviding earthing station conforming to IS 3043 as specified incl. excavating the earthing not less than 3 m deep and back filling with soil to treated soil components of alternate layers of charcoal and common salt incl. 600mm x 600mm x 3 mm copper electrode with earth conductor incl. masonry chamber with C.I cover, watering pipe (40mm dia G.I Pipe) and test links etc.complete

EARTHING CONDUCTOR supply, laying of earthing conductor in ground, built up trenches, cable trags, incl. clamps and fixing accessories incl. excavaton and back filling wherever needed (25mm x 3mm copper strip)

WIRING INSTALLATION Wiring, lightening points/bell points/fan points concealed type in stage wise i.e., the time of casting slab, plastering, flooring, finishing items with 3x1.5 Sqm copper wire + 1 No. earthing wire in 20/25 mm dia SFT PVC conducts with JB pull boxes, clamps, saddles and other accessories incl. fixing necessary out lets and connecting terminals switch boxes M.S type having earth point incl. testing and commissioning.

Wiring, heating points concealed type in stage wise i.e., the time of casting slab, plastering, flooring, finishing items upto first heating outlet with 3x2.5 mm2 copper wire + 1 No. 1.5 mm2 continous earthing wire in 20/25 mm dia PVC conduits with JB pull boxes, clamps, saddles and other accessories incl. fixing necessary out lets and connecting terminals switch boxes M.S type having earth point incl. testing and commissioning. complete

supply, laying testing of circuit wiring for lightening point using 2.5mm2 + 1.5 mm2 for continous earthing wire incl. commissioning.

Supply, laying, testing of circuit wiring for heating point using 4 mm2 for contineous earthing complet.

TELEPHONE/CABLE NETWORKING supply, laying commissioning of telephone copper wire 5 pair 0.7 mm laid in separate PVC conduits in walls, ceiling, floors trenches complete of approved quality.

Supply, layng, commissioning of insulated telephone copper wire 2 pair 0.7mm laid in separate Sft PVC conduits in walls, ceiling, floor trenches complete of approved quality/ make.

FITTINGS AND FIXTURES Supply, laying, commissioning of a) 5Amp Switch Havells/SSK/Legrands

b) 5 Amp Bell Push

d) 6 Amp 3 Pin Sockets

e) 30 Amp Socket

f) 30 Amp Switch

g) Light Indicator

h) telephone jack RJ-11

j) Dummy plug small

Supply and insallation of gang plates modular type with cover and plate white a) Module 2

module 1

module 3

b) Module 4

c) Module 6

d) Module 8

e) Module 12

supply, Installation, testing and commissioning of wall brackets mirror lights etc. of approved make.

supply, installation testing and commissioning of Canopy High Power led light IP66 with lamp type 80W Led 600K lumanaire code LHEMACP7PN 6S080 (Havells or equivalent make)

Supply , installation testing and commissioning of LED clean room IP 54 lamp type 42 W Led 6000K lumanaire code LHECCWL7PW W042 (Havells or equivalent make)

Sypply installation testing and commissioning of BOLT Square led light a) Lamp type 6W Led 6000K Lumanaire codeLHEAASP7ULIW006 (Havells or equivalent make)

b) lamp type 12 W Led 6000K Lumanaire code LHEAASP7ULIWO12 (Havells or equivalent make)

Supply installation testing and commissioning of 30 Watt Led 5000 K LHEDLZUEIN6W030 (Havells or equivalent make)

Supply, installation testing and commissioning of industrial type exhaust fan single phase 300 mm sweep.(Havells or equivalent make)

square block

Fan dimmer

Ceiling rose

Electronic bells

Dash fastner 150mm hilti

Providing and fixing of 8mm thick PVC sports flooring (Vinyl indoor sports flooring BWF certified ). The flooring should be a multi layer product consisting of top layer as wear layer in GEM pattern of thickness 1.5 mm followed by fibre layer for better dimensional stability of the product.The last layer should consist of Foam layer. The flooring to be fixed with water based or rubber based adhesives to ensure better adhesion of the product . The joints of the flooring to be thermo welded with pvc weilding cord of similar colour. The process to be executed by an hot weilding process it should have all sports properties like shock absorbtion , ball rebounding etc . Product should be BWF certified and IAF approved conforming to EN 14904 category P1 with shock absorption of 34%.

Design, preparation and submission of complete set of shop drawings for civil, sanitary and electrification and main hall for complete construction of all features ( complete Job).

Earth work in excavation by mechanical/ manual means for foundation drains pipes etc. not exceeding 1.5 Mtr in width upto desired depth (as per design) in all kinds of strata incl. disposal of excavated earth beyond 100 Mtrs lead or as directed by EIC including loading/ unloading / dosing etc Surplus excavated earth is to be disposed beyond the municipal limits by mechanical means including all equipments and machinery including to prevent sliding of sides of foundation, effective and sufficient protection, providing staging, timbering and shuttering etc including dewatering of trenches during execution of all items of work upto NSL. (All kinds of soil). Including ETS Charges Complete

Subsoil investigation by drilling borehole with augar boring or whatever means for ascertaining the bearing capacity and sub soil strata including hire charges of equipment, transportation and consultancy charges including submission of report in accordance with the standard IS practices, depth 20m. (Complete Job)

M/S FALCON CONSTRUCTION COMPANY

M.N.Enterprises

M/S MOHAMMAD ASHRAF GILKAR ENGINEERS AND CONTRACTORS