Balance work for Repair Renovation of Munsiff Court Quarter at Billawar

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables, etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5m including getting out excavated earth as directed by Engineer-in-charge, including all leads and lift. a) All Kind of soil.

Providing and laying cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:5:10 (1 cement:5 coarse sand:10 graded stone aggregate 40mm nominal size) (including all leads and lifts carriages of material by MT/HL)

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead

a) 1:3:6 or richer mix.

b) 1:4:8 or leaner mix.

Providing and laying cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by MT/HL)

Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 (1 cement:6 coarse sand). (including all leads and lifts carriages of material by MT/HL)

Reinforced cement concrete work in beams, suspended floor, roofs having slope upto 15˚, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with: a) 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size). (including all leads and lifts carriages of material by MT/HL)

Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. a) Cold twisted bars.

Centring and shuttering including strutting, propping etc.and removal of form work for :

a) Foundation, footings, bases of columns etc. for mass concrete.

b) Suspended floors, roofs, landings, balconies and access platform.

15mm cement plaster on the rough side of single or half brick wall of mix. 1:4 (1 cement: 4 fine sand) (including all leads and lifts carriages of material by MT/HL)

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete (including all leads and lifts carriages of material by MT/HL)

Providing and laying vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. a) Size of tile 600x600mm (including all leads and lifts carriages of material by MT/HL)

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge, in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement)3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm. including pointing in white cement mixed with pigment of matching shade complete (including all leads and lifts carriages of material by MT/HL)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. a) Two or more coat on new work

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately). a) 2nd class deodar wood.

Providing and fixing 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design / shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge (complete job).

Providing and laying dry stone aggregate using 40mm nominal size incl. spreading leveling of sand grouting watering & ramming including carriage etc. all complete.

Finishing walls with acrylic smooth exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm.

Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required. a)White glazed fire clay kitchen sink of size 600 x 450x250mm

Providing and fixing White vitreous china wash basin including making all connection but excluding the cost of fitting (Jaquar). a)Flat back ISI marked size 630 x 450mm

Providing and fixing on wall face un-plasticized- PVC moulded fittings/accessories for un plasticized Rigid PVC rainwater pipesz conforming to IS:13592 TypeA including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. a) Coupler 75mm

Carriage of the following materials by Mechanical Transport from source to site of work incl. loading, unloading and stacking complete :- a) Sand from Billawar crusher for an average lead of 3.00 Km. by M.T. b) Stone aggregate 40mm nominal size & above from Billawar crusher for an average lead of 3.00 Km. by M.T. c) Stone aggregate (Crusher bajree) below 20mm nominal size from Billawar crusher for an average lead of 3.00 Km. by M.T.

RAVI KANT GOVT CONTRACTOR