REPAIR, MAINTENANCE OF EXTERNAL ELECTRIC SUPPLY, LT OH/UG CABLE, STREET LIGHT FITTING, PAINTING OF POLES, AND SERVICE CONNECTION, CABLES AND CONNECTED ITEMS AT RV COLONY UNDER GE (I) R and D KANPUR

Amount

Supply, fixing and testing in replacement of Old unserviceable/ worn out Aviation light by integral LED Aviation light of 302 LED comprising ofaluminium housing with polycarbonate enclosure complete all as specified and directed including all accessories complete . Make :Bajaj Cat No 110731/ Phillips/CG/ /Havells as approved by GE (I).

Supply, fixing and testing in replacement of Old unserviceable/ worn out street light fitting by pressure die cast powder coated LED street light 100 watt 240 volt , in built integrated electronic LED driver toughened glass with silicon gaskets for IP 65 protection including all accessories complete complete all as specified and directed. Make : Bajaj cat No 169885 /Crompton cat no LSTN 100 CDL- A/ Havells Cat No LHETAXU7PA6J120 as approved by GE (I).

Supply, fixing and testing in replacement of Old unserviceable/ worn out street light fitting by pressure die cast powder coated LED street light 60 watt 240 volt , in built integrated electronic LED driver toughened glass with silicon gaskets for IP 65 protection complete all as specified and directed including all accessories complete . Make : Bajaj Cat No 169950/ Havells cat no LHETBXU7PA7B060/ Crompton Cat No LSTP- 60-CDL as approved by GE (I).

Supply, fixing and testing in replacement of Old unserviceable /worn out security light fitting by Out Door LED Security light fitting 30 W of suitable size including connection with 3 core sheathed PVC insulated cable white colour not less than 0.5 sqmm not more than 0.50 m long complete all as specified and directed. Make :Bajaj Cat No 169887/ Havells Cat No LHETBXU7PAIS030/ Crompton Cat No LSTL-30-CDL as approved by GE (I).

Supply, fixing and testing in replacement of Old unserviceable/ worn out flood light fitting by Turbo LED flood light 180 watt 240 volt with secondary optics made in pressure die cast housing a LED flood light high efficiency in built integrated electronic LED driver complete all as specified and directed including all accessories complete . make :Bajaj Cat No 169658/ Havells Cat No LHFPCZBFP46J180/ Crompton Cat No LSFO-200-CDL/60 as approved by GE (I).

19. Supply, fixing and testing in replacement of Old unserviceable/ worn out flood light fitting by Turbo LED flood light 120 Watt, 240 volt with secondary optics made in pressure die cast housing and heat sink in aluminium extursion with IP 66 protection high efficiency in built integrated electronic LED driver complete all as specified and directed including all accessories complete . Make : Bajaj Cat No 169641/ Havells Cat No LHFPCZBFP46J120/ Crompton Cat No LFLN-150-CDL/60 as approved by GE (I).

Supply, fixing and testing in replacement of Old unserviceable/ worn out post top lantern with LED post top lantern 40 Watt by pressure die cast powder coated LED high efficiency in built integrated electronic LED driver IP 65 protection complete all as specified and directed including all accessories complete . Make : Bajaj Cat No 112364/ Havells cat no LHEVBGP7PN6K040/ Crompton Cat No LPTO-40-CDL as approved by GE (I).

Supply, fixing and testing in replacement of Old unserviceable street light timer with astronomical timelite switch distribution board of capacity 40Amp, 230 volts, 50 Hzs including all accessaries fitted on pole complete all as specified and directed. Make : IndoAsian/Hager/ Bajaj/Havells as approved by GE (I).

Dismantling & taking down unserviceable street light/security light fitting of SV/MV type of 150/250/400 Wattage or T- 5 Street Light luminaires or 2x36 watt CFL Fitting of any type from existing pole/building from height not more than 11.0 metre from ground level for repair/replacement of worn out / burnt accessories and refixing at same location after making it serviceable including testing and connecting to street light feeder complete in all respect and as directed by Engr-in-Charge. Note :- Spare parts/service wire/control wiring required to make the light fittings serviceable shall be measured and paid separately as "supply only" under relevant items.

Supply of Metal halide tubular clear lamp (single ended), Base cap - E 40 type of 150 Watt suitable for 240 VAC supply Lamp Type : 150W MH SET-Make : Phillips/CG/ Bajaj/Havells as approved by GE (I).

Supply of Metal halide tubular clear lamp (single ended), Base cap - E 40 type of 250 Watt, suitable for 240 VAC supply Lamp Type : 250W MH SET-6000K Make : Phillips/CG/ Bajaj/Havells as approved by GE (I).

Supply of Metal halide tubular clear lamp (single ended), Base cap - E 40 type of 400 watt, suitable for 240 VAC supply Lamp Type : 400W (BT) 6000 K , Make : Phillips/CG/ Bajaj/Havells as approved by GE (I).

Supply of T 5 Lamp of 24 Watt Cool day light of High efficiency/High out put suitable for 240 VAC supply Base cap G5 Type Lamp Type : 24WT5HO-6500K,Make : Phillips/CG/ Bajaj/Havells as approved by GE (I).

Supply of high frequency "regular" electronic ballast slim, light in weight suitable for 2 x 24 watt T5 luminaires to improve power factor close to 0.98 having THD < 30 % complete all as specified and directed. Make : Phillips/CG/ Bajaj/Havells as approved by GE (I).

Supply of open construction electromagnetic MH ballast consisting of high quality silicon steel lamination with argon welding, super enamelled copper wire wound, vacuum impreganated with white resin, terminal block with tapping for 220/240 Volt AC Supply of 150 Watt suitable for MH luminaires complete all as specified and directed. Make : Phillips/CG/ Bajaj/Havells as approved by GE (I).

Supply of open construction electromagnetic HPSV/ MH ballast consisting of high quality silicon steel lamination with argon welding, super enamelled copper wire wound, vacuum impreganated with white resin, terminal block with tapping for 220/240 Volt AC Supply of 250 Watt suitable for Metal halide luminaires complete all as specified and directed. Make : Phillips/CG/ Bajaj/Havells as approved by GE (I).

Supply of open construction electromagnetic MH ballast consisting of high quality silicon steel lamination with argon welding, super enamelled copper wire wound, vacuum impreganated with white resin, terminal block with tapping for 220/240 Volt AC Supply of 400 Watt suitable for MH luminaires complete all specified and directed. Make : Phillips/CG/ Bajaj/Havells as approved by GE (I).

Supply of electronic ignitor (superimposed) for integral type metal halide luminaires of 70/150/250/400 Watt suitable for MH Lamp upto 5 metre striking distance complete all as specified and directed.Make : Phillips/CG/ Bajaj/Havells as approved by GE (I).

Supply of Lamp Holder, Lampbase - G 5 for 4 x 24 Watt T 5 Luminaires complete all as specified and directed. Make : Phillips/CG/ Bajaj/Havells as approved by GE (I).

Supply of FR PVC insulated, PVC sheathed flat twin core, solid aluminium conductor cable of size 2.5 sq mm for voltage grade upto 1100 volt confirming to IS- 694/1990 with latest amendments and ISI marked including removing old connection and making service connections to street light feeder of Make:- Polycab or its equivalent of EON (Indo Aian) / Havells/ Paragon Electron/ Plaza/Rallison as approved by GE(I).

Supply of FR PVC insulated, PVC sheathed flat twin core of stranded aluminium conductor cable/wire of size 6.0 sq mm for voltage grade upto 1100 volt confirming to IS- 694/1990 with latest amendments and ISI marked including removing old connection and making service connections to street light feeder of Make:- Polycab or its equivalent of EON (Indo Aian) / Havells/ Paragon Electron/ Plaza/Rallison as approved by GE(I).

Supply of metalised poly-propylene film capacitor as per IS 1569 for use in luminaires to improve power factor complete all as specified and directed of following capacity and of Make - CG or its equivalent of Surya/Havells/Epcos/Siemens as approved by GE(I)

20 Mfd, 250VAC for 150 watt MH fitting

33 Mfd, 250VAC for 250 watt MH/SV fitting

42 Mfd /250VAC for 400 W MH fitting

Supply & fixing street light bracket made out 32 mm dia bore Galvanised Iron pipe, light grade ISI marked of length not less than 1.2 metre, bend to required shape for holding the fitting including taking down the old bracket from existing pole/building complete all as specified and directed. Note:-Clamps ,Nut & Bolts for supporting the brackets shall be measured and paid separately under relevant item herein after.

Supply, fabrication, bending of mild steel flat iron to required shape and size as required/ directed including drilling hole, nuts, bolts and washers set of adequate size with one priming coat of red oxide with two finishing coat of aluminium paint and fixing on steel tubular pole including removing old flat iron for supporting G.I. tubing/bracket/protection pipe complete all as specified and directed.

Supply and fixing the electronic energy meter electronic tamper proof design digital technology of three phase 3x240 volts volts 50 HZ 0.4% basic current for direct connected meter and 0.2% of basic current for CT operated meter LCD display class 1 accuracy as per IS 13779 temper proof Microprocessor based single phase energy meter of 10--60 amps /5 amps CT operated with CT with optical communication port with all accessories and including sealing with sealing wire, sealing materials and lead complete and connecting with all accessories all as directed at site. Make HPL socomec model PPEM 01 or equivt havells or as approved by GE

Supply, Errecting and fixing in replacement of in true Vertical position steel tubular swaged pole with iron square belded base plate, finial taper plug, bolt, nuts and screw,weld and reduced section and logitudional weld Seam through out entire length of pole including 2 coats of black bituminious paint through out intrnely and externely up to planting depth and remaining exterior portion of pole with two caot of aluminium paint over a coat of red oxide as specified type 410 SP 31 (9.00 Mtr long) complete all as specified and directed at site. NOTE - Excavation and Earth work and PCC in foundation shall be measured and paid seprately.

16. M&L for pre- fabricated street light junction /distribution box of size 200mm x250 mm with hinged cover system made of MS Sheet/ CRCA sheet duly painted with two coats of synthetic enamelled paint over a coat of red oxide primer suitable for mounting on pole including fixing on pole with clamp 50x6 and nut, bolts and suitable size Aluminium bus bar 02 Nos (Phase,N) connecting incoming and out going connection with proper lugging as latest practice acting as control circuit for street light including MCB SP 'C' 6 Amps for control of s/light complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep in soft/loose soil and getting out for cable complete all as specified and directed.

Returning filling of excavated soil after laying the cable with spreading leveling watering and well ramming in layers not exceeding 25cm thick in loose/soft soil complete all as specified and directed.

Removal of surplus soil/excavated material obtained from ground level to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above from the starting point complete all as specified and directed.

Supply & spreading local sand obtained from ganga river in trenches for cable cushioning complete all as specified and directed.

Supply & laying /paving of dry well burnt bricks of sub class ‘B’ laid flat of whole brick over the cable after spreading the sand for cable protection complete all as specified and directed.

Supplying and laying un-reinforced precast concrete cable cover, Type 2, flat, size 300mm x 180mm x 40mm over the cable after spreading the sand for cable protection complete all as specified.

M&L for PCC (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) for foundation base complete all as specified and directed.

M&L for PCC(1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) for foundation of pole and stay assembly complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) for coping/finishing of pole foundation and plinth protection complete all as specified and directed.

Supply and fixing GI tubing of 100 mm dia bore, light grade conforming to IS 1239 Part-I and ISI marked fixed alongwith pole and embedded in hardstanding / pillar foundation including breaking /cutting PCC/hard standing not exceeding 20 cm girth or as required at site and making good with cement mortar of ratio 1 :3 complete all as specified and directed.

All as per item no 37.00 herein before but 50 mm bore

All as per item no 37.00 herein before but 25 mm bore

Cutting & Chasing required on concrete block /path/tile /floor/ wall not exceeding 20 cm girth to concealed the cable/GI wire and making good to disturbed surface with cement mortar 1:3 including facing / finishing where as required to match with existing surfaces complete all as specified and directed.

Takingout unserviceable cable any type from trenches,pole, road,duct etc including necessary joints(U/S)fittings and pipes etc complete all as specified and directed

Supply & laying XLPE insulated, PVC sheathed, strip armoured electric cable with aluminium conductor (stranded) working voltage upto 1100 volt of 120.0 Sqmm x 3.5 core as per IS 7098 Pt I in trenches, culvert, through pipe etc including connecting both end with proper size of alluminium lugs duly crimped with die press crimping device and cable gland complete all as specified and directed by Eng-in-charge.

Supply & laying XLPE insulated, PVC sheathed, strip armoured electric cable with aluminium conductor (stranded) working voltage upto 1100 volt of 35.0 Sqmm x 3.5 core as per IS 7098 Pt I in trenches, culvert, through pipe etc including connecting both end with proper size of alluminium lugs duly crimped with die press crimping device and cable gland complete all as specified and directed by Eng-in-charge.

Supply & laying XLPE insulated, PVC sheathed, strip armoured electric cable with aluminium conductor (stranded) working voltage upto 1100 volt of 25 Sqmm x 3.5 core as per IS 7098 Pt I in trenches, culvert, through pipe etc including connecting both end with proper size of alluminium lugs duly crimped with die press crimping device and cable gland complete all as specified and directed by Eng-in-charge.

Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated PVC bedded armored heavy duty electric cable 1100V grade with aluminum conductor of cross sectional are 10 Sq mm 2 core complete all as specified and directed.

Supply and Fix MCCB with continuously adjustableThermal and Adjustable Magnetic Release, Four Pole, 415 VAC, Current rating- 250 Amps, Breaking capacity ( Ics ) - 36 KA, complete all as specified and directed by GE (I). Make:- Indo Asian /Legrand / Seimens/Schneider/Hager as approved by GE (I).

Supply and Fix MCCB with continuously adjustableThermal and Adjustable Magnetic Release, Four Pole, 415 VAC, Current rating- 200 Amps, Breaking capacity ( Ics ) - 36 KA, complete all as specified and directed by GE (I). Make:- Indo Asian /Legrand / Seimens/Schneider/Hager as approved by GE (I).

Supply and Fix MCCB with continuously adjustableThermal and Adjustable Magnetic Release, Four Pole, 415 VAC, Current rating- 63 Amps, Breaking capacity ( Ics ) - 25 KA, complete all as specified and directed by GE (I). Make:- Indo Asian /Legrand / Seimens/Schneider/Hager as approved by GE (I).

M/S PASHUPATI TRADERS

Himanshu Construction and Suppliers

Shanti Constructions

VEE KAY ENTERPRISES

M/s A S Electrical