Work of installing street lights (including poles) for lighting at the Government Public Stadium, Bajju Khalsa

Supply and erection of MS pole conforming to with galvanised base plate in position excavation of the and filling the same with of M-20 grade 1:1.5:3 from base plate to ground level with the help of steel frame not less than 40 cm dia up to 114.3mm outer dia and 50 mm ID and 114.3mm outer dia around the pole. Duly finished with cement plaster, earthing terminals, cable entry, GI cable sleeve complete as required. After erection pole shall be painted with two coats of red oxide primer and two coats of enamel paint of silver colour as per the direction of Engineer in charge. The pole shall be fabricated by using IS mark tube for structural purpose of following height & designation (See Table P-02 for specs complete in all respects). All as per pre-approved by Engineer in charge. For additional technical parameters of products/work refer Annexure 'A' attached with this BSR. Based on RUIDP BSR Electrical E180701 7.5 Mtr. (410 SP-5) Rs- 6992/each less 10% cont. profit.

Providing & Fixing of IKOB IP-66 protected high power LED flood light system with single piece Pressure die-cast aluminium housing, toughened glass with suitable lenses on LED/integrated lens diffuser to achieve various beam angles, of high power LED of 3 to 5 watt each. Integrated metal case potted driver has a unique BIS R number (as per IS 15885) having efficiency more than 85% and in compliance to BIS certified and Trade mark certificate (Fitting & driver both have separate BIS R number). The System level Luminaire efficacy > 130 lm/W. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @ > 300 V AC & Low Voltage cutoff @ > 90 V AC and Auto resetting Safety Power factor 0.95, THD < 10% LED driving output current < 750mA. Driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector Surge Protection Min > 4KV internal and 10KV external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI > 70 and CCT 5700K ±355K as required. High Power LED Flood Light 200W RUIDP BSR Electrical E181209 Rs 22146/each Without GST less 10% cont profit.

Providing & Fixing of IKOB, IP 66 protected LED Street Light Luminaire on existing bracket/pole Fixture made of powder coated single piece pressure die cast aluminium material with heat dissipation fins on housing and secondary lens on each LED/Integrated lens diffuser without cover & should be High power LED of 3 to 5 watt each. The System efficacy 135 lm/W and integrated metal case potted driver & has a unique BIS R number (as per IS 15885) with Input Voltage AC 120 to 270 V AC with High voltage Cutoff 300 V AC & Low Voltage cutoff @ > 90 V AC and Auto resetting Safety, Power Factor >0.95 driver Efficiency >85% THD < 10% Humidity 10% to 90% RH Working Temp -5°C to 45°C LED driving output current 750mA. The luminaire shall be BIS certified (Fitting & driver both have separate BIS R number) and Trade mark certified Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintained, CRI 70 and CCT 5700K ±355K. Surge protection shall be min 4 KV Internal driver should be Phase to phase protection of 440 V and min 10 KV external inside driver compartment for 4 Hrs as required. LED Street Light fixture 100 Watt RUIDP BSR Electrical F-181307 Rs-8744/each less 10% cont. profit.

Supply & Fixing XLPE insulated PVC sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS 7098-1/1554-1 approved make in ground as per IS:1255 including excavation of 30cm x 75cm size trench, 25 cm thick under layer of sand, second class bricks covering, refilling earth, compaction of earth making necessary connection, testing etc. as required of size. Based on PHED BSR 2022 item no. 2.20.1 Rs-218/- Mtr less 10% cont. profit.

Contingency charges - 2%