CWE/K-59/2021-22 PROVN OF GD ROOM WITH BATHROOM AT 2/5 GR (FF) AND SPECIAL REPAIR TO BLDG NO. T-140 (COOK HOUSE) OF 118 (I) INF BDE GP SIG COY, AT NIMU UNDER AGE(I)NIMU

Amount

Sch "A' Part-II B/R work:- Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil, complete.

Excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil complete all as specified and as directed.

Extra over item No. 2 for each additional 1.5 m or part thereof in depth beyond the first 1.5 m

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out hard/dense soil

Returning , filling in excavated soil including spreading , leveling watering and well ramming in layers not exceeding 25 cm thick complete

Removing excavated material (soils) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point, complete.

M&L for cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete.

Demolation of brickwork or stone/boulder masonry, built in cement mortor including all quins, arches pillars, etc, but excluding ashlar facings dressed stonework and precast concrete articles.

M&L for pre-cast cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate ) block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6, and set as in wall etc

M&L for stone masonrywalling of random rubble, uncoursed well bonded, beded and solidly herted, built in cement mortar 1:4 complete all as specified and as directed.

M&L for stone walling of random rubble, uncoursed, well bonded, laid dry in retaining walls, abutments and similar work complete all as specified and as directed.

M&L for 75mm thick cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in sub base.

Taking down Chowkhats or frames exc 1.5 Sqm but not exc. 4 sq. m each (without taking off shutters from the frames)

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)

M&L for 2nd class softwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

M&L for 2nd class Hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

S&F mild steel hold fasts, wall ties and similar small articles conforming to Fe 290-0 or E 165

M&L for cement concrete , 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in lintel upto 1.50 m span, cills, steps, seismic and other silmilar bands, plinth courses, sring courses,lacing courses, parapets and railings upt 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troghs and the like including weathering, slightly rounded or camphered angles and throating, as directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips.

All as per item No 08 here-in-before but but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter,

Formwork to sides and soffits of girders, bressummers, lintels, cantilevers, shelves including supports, flat rough finished surface of concrete.

Formwork to sides of column, posts for Square and rectangular rough finished surface.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick

M&L for RCC 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregate ) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete (Note:-TMT bars will be masured and paid sepretly)

M&L for RCC 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregate ) as in Beams, cantilevers, bressummers, lintels over 1.5m span (Note:-TMT bars will be masured and paid sepretly)

M&L for RCC 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregate ) as in Columns, pillars, piers, posts and struts (Note:-TMT bars will be masured and paid sepretly)

M&L for RCC 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregate ) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like (Note:-TMT bars will be masured and paid sepretly)

M&L for pre cast reinforced cement concrete 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregate ) as in manhole cover set in cement mortar 1:4. (Note:-TMT bars will be masured and paid sepretly)

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to Fe 410 W (Gde-E-250) quality A.

M&L for mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long and dia of neck exc 12mm and n.exc 20mm complete all as specified.

M&L for preparation of new surfaces of steel of any description , over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge ..

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, roof coverings & wall

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for joint free non skid ceramic tiles " coloured" 7 to 8mm thick ( Square/rectangular ) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floors etc.set and jointed in neat cement slurry and pointed in white cement incl 15mm thick screed bed in CM 1:4 over 25mm thick PCC bed in PCC 1:2:4 ( type B-0) prepare to recd top layer complete all as specified

M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including laid over screed bed of 15mm thick of cement mortar 1:6 all as specified and directed.

Rendering 10 mm thick on fair face of brick work or concrete/stone surfaces in CM 1:6 finished even and smooth without using extra cement.complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed by Engr-in-Charge ..

M&L for Glazed ceramic tiles in vertical surface 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade of tiles including laid over backing coat of 10mm thick of cement mortar 1:4 all as specified and directed.

Rendering 15mm thick on fair face of brick work or concrete/stone surfaces in CM 1:4 mixing with WPC @2% by weight of cement or as per manufacturer instruction and finished even and smooth without using extra cement.complete all as specified and directed by Engr-in-Charge. Note:WPC will be measured and paid sepratly.

Supply only water proofing compound.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed by Engr-in-Charge ..

M&L for 2nd class softwood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats for doors.

M&L for 2nd class hardwood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats for doors.

M&L for 2nd class hardwood 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. devided in squares in plain, chamfered or rounded. mittered and rebated with sash bars and providing in windows, ventilators and stiles and rails etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b).

S&F 100mm long butt hinges, medium weight, cold rolled mild steel

S&F 75mm long butt hinges, medium weight, cold rolled mild steel

S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised

S&F 100mm long extruded aluminium alloy handles, fabricated type, anodised

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy.

S&F 200mm long aluminium anodised, barrel tower bolts of extruded section

S&F 100mm long aluminium anodised, barrel tower bolts of extruded section

S&F 3mm thk sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq.m in each pane

S&F 3mm thick figured glass, pin head type and glazing with wooden beads in squares n exc 0.5 sq. m in each pane

M&L for preparation of new wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description n exc 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness including cover fillets

Dismantling timber scantling as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in any position as in unframed work

M&L for 2nd class soft wood Plain fillets.sec area exc. 13 & n.exc 25 Sq cm as in square, rectangular or triangular in section, clean sawn, secured with nails or brads.

All as per srl item No. 63 here-in-before but sectional area n.exc 3 sq cm bull nosed, splayed, chamfered or rounded on one edge or face

S&F 6mm thick Plywood, 5 no of ply, grade BWR, type BB, fixed with nails to timber frame work as in ceiling complete

S&F 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in ceiling

S&F 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in walls

M&L for hardcore of gauge n exc. 63 mm of broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

Demolition of cement concrete of any description and in any position not otherwise specifically provided for.

M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate in plinth protection including provision of necessary form work finishing the exposed surface even and smooth complete all as specified.

Dismantling water tanks Exc 500 & n.exc 1000 litres capacity

S & F rotational moulded polythene, two layers, water storage tank 1000Ltrs capacity, closed top, cylindrical, hoisted and fixed in position including minor repairing & 20mm flot ball brass valves high pressure with polythene float and flynut complete, Aluminium rod & high-density plastic ball screwed for iron pipe complete all as specified and dirtected by Engr-in-Charge .

S&F 20mm dia nipple suitable for HDPE water tank. (Minimum weight 20mm-45gms)

Taking up/down 25mm bore and 32 mm old tubing on walls and connection of size 15mm bore complete all as specified and as directed

S&F 20mm dia 3-layer PP-R ( Polylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., complete all as specified and directed by Engr-in-Charge.

S&F 25mm dia 3-layer PP-R ( Polylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., complete all as specified and directed by Engr-in-Charge.

S&F 32mm dia 3-layer PP-R ( Polylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., complete all as specified and directed by Engr-in-Charge.

S&F 25mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule

S&F 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule

S&F Stop valve 25mm bore cost copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed bath ends for iron pipe or fixed union

M&L for PVC(SWR) pipes single socketed, if any lenth with rubber ring joints, laid in trenches or in floor/wall (75mm bore)

M&L for PVC(SWR) pipes single socketed, if any lenth with rubber ring joints, laid in trenches or in floor/wall (110mm bore)

M&L for PVC (SWR) floor trap75mm bore, plain with grating including jointing with solvent cement

M&L for 110mm dia PVC (SWR) junction single, (Single T) equal or unequal with access door

M&L for 110mm dia PVC (SWR) vent cowl

M&L for 75mm dia PVC (SWR) junction single, (Single T) equal or unequal with access door

M&L for PVC (SWR) bends redius 75 mm bore

M&L for PVC (SWR) bends redius 110 mm bore

M&L for concrete bed to 100mm bore drain pipes with PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate including packing under and completely surrounding pipes with concrete after they are laid and tested.

M&L for 550x400mm Wash basins, Vitreous China (flat back or angle back type) any size, and 32mm dia brass waste fitting including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe

S&F 32mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc

S&F 15mm dia Pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F PVC connection 15mm size with PTMT nuts of length 300mm

S&F CP single towel rail 600mm long fixed to wall incl brackets complete all as specified

S&F Vitreous China Urinal bowl, flat back type size 465x355x265mm minimum, white (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and directed by Engr-in-Charge.

S&F 40 mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed etc

S&F Vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests with connection to drain and to flushing pipe antisyphonage pipe, PVC (SRW) 'P' trap including making good to floor complete all as specified and dirtected by Engr-in-Charge .

S&F PVC valveless, syphonic action type, flushing cistern 10 lts capacity, low level, white, with inlet, ball valve, float and handle including brackets

S&F 15mm Bib taps, cast copper alloy CP with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule

S&F 15mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for nions and fixed

S & F in repair 32mm bore PP-R gate valve(brass insert) and fixed all as specified and directed by Engr-in-charge.

Sch "A' Part-II E/M work:- Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials from site and making good disturbed surfaces of walls, floors, etc.

M&L for point wiring with two single core PVC insulated, unsheathed, FRLS type, 1100 volts grade, multistranded copper conductor cable 1.5 sqmm in and including PVC casing caping ISI marked with all connected accessories including one single core multistanded PVC insulated FRLS type, 1.5 sqmm copper conductor cable unsheathed as earth continuity cable including closed recessed wooden terminal boxes of suitable size made of 2nd class hard wood for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet top cover complete all as specified for the following:- Make of cable: Finolex/Polycab/Havells/Plaza. (a) One light /fan/bell point/buzzer point exhaust fan controlled by one nos, one way 5/6 Amps switch.

One 3 pin socket outlet, 5 Amps, independent, with cables 1.5 sq. mm size

One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sq. mm size

All as per srl item No 104 here-in-before but with conductor of size 4 sqmm (Nominal area) for one 3 pin socket outlet 15 Amps on independent board complete and earth continuity wire with 4 sqmm PVC insulated stranded copper conductor Cable.

S&F Socket outlet multipurpose 2 in 1, 3 pin, 5 and 15 amp flush type

S&F Socket outlet multipurpose 3 pin, 5A, and 2 pin 5A flush type

S&F Switch piano, flush type single pole, one way 5 Amp

S&F Switch piano, flush type single pole, one way 15 Amp

S&F Ceiling rose 65x50mm, 2 to 3 terminal PVC/polycarbonate, isolated body

S&F LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m

S&F sheet metal powder coated versatile double door SPN distribution board, 12 way suitable for MCB's fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240 Volt, 50Hz .

S&F sheet metal powder coated versatile double door SPN distribution board, 8 way suitable for MCB's fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240 Volt, 50Hz .

S&F MCB SPN 63 Amp 240 volt AC with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.

S&F MCB SP 6-32 Amp 240 volt AC with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.

Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all as shown in Plate No. 2 to the earthing test point all as specified and indicated including testing on completion

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for laying of cable/pipe & getting out in any type of soil complete all as specified and directed

Removal of excavated soil to distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed

Returning filling in including spreading, levelling, watering and well remming in layers not exceeding 25cm thick in hard/dense soil complete all as specified.

M&L for GI tubes 25mm bore medium grade with all fittings laid in tranches.

S&F 25mm bore gun-metal, globe or gate valves, cast copper alloy screwed down high pressure with clutch or butterfly handle screwed both ends for iron pipe

Cutting of existing GI water main pipe line of any size in any position for making branch connection (insertion of GI TEE) including GI fittings such as tee, elbows, reducer etc. including excavation and earth work complete all as specified and as directed.

Supply, laying and testing LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 16 sq. mm 2 core complete all as specified

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor of size 16 Sqmm twin core, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, flat or circular all as specified and as directed.

S&F DWC tubing of size 90/76mm dia for laid in trenches/along the pole/wall for protection of cable complete all as specified and as directed.

Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 45,183.00 and any other reduction if any from quoted amount.

osho traders

M/S LOBZANG NORBOO

M/S SONAM RIGZIN

M/S MUNEER HASSAN AKHON

M/S LIBE & CO