Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹57.9 L
EMD Value
₹1.2 L
Closing Date
15 Jan 2026, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
DRAWING
15 conditions · 3 needing a document upload
c) Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-F, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
a ) Electrical License: The tenderer/Firm should have valid electrical contractor license on their own name or firm name issued by Electrical licensing board of any state. The license should have been issued on a date prior to the date of tender opening. Copy of License shall be uploaded online failing which offer will be rejected.
b ) Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month before the one in which tender is invited: Three similar works costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Definition of Similar nature of work: "Works of wiring/cabling or installation and commissioning of electrical items (other than on coaches) such as lights, fans, pumps, charging arrangements, earthing etc. (with or without supply of items / equipment) for 230V, 1phase or 415V, 3phase system or higher voltages".
9 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer /s are required to submit a scanned / attested copy of following information along with their tender- 1. Bank Account No 2. Name of Bank 3. Indian Financial System Code {IFSC} 4.PAN No 5. Tenderers Contact No Contractor should provide firms PAN, issued by Income Tax Department with his quote or within30 {Thirty} days of award of contract. No payment will be released without submission of PAN. All taxes including surcharge and cess shall be recovered from his payment as per tax provisions in vogue.
The tenderer shall thoroughly go through the entire tender document and strictly adhere the instructions and directions given at different pages.
It is responsibility of the tenderer that they ensure to see any corrigendum of the tender to check the corrigendum on the website from time to time.
All the required/supporting documents should be scanned and uploaded.
In case the date of closing mentioned in the Notice Inviting Tender is declared a holiday/bandh/strike etc. on any account, the date of closing tender online will not be changed as the application in the website of IREPS does not permit submission of any offer after closing date and time of the tender. However, opening of tenders online will be on any convenient day after the closing date/time of tenders.
Opening of e-tender online:- The e-tenders will be opened online using the IREPS portal. No representative is required to be present for opening of tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders in the website after the opening of the tender.
Nanded Division: Provision of Ballast less Track 03 Nos. at Nanded station (Road 1- 720m, Road 2- 720m and Road 3- 700m) Electrical Arrangements.
NED-E-37-2025-26~SCR
NED-E-37-2025-26
Open
Works - General
12 Months
Nanded, Maharashtra
₹0
₹1.2 L
15 Jan 2026
23 Dec 2025
1 Jan 2026
53 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 57,86,168 | ||
| — | 200.00 | — | — | ||
| Supply of 4 core x 400 Sq mm LT UG XLPE Aluminium armoured cable as per BIS specification IS 7098 Part I or (latest amendments ) along with end terminations. . | — | — | — | 3,22,000 | |
| — | 200.00 | — | — | ||
| Erection of 4 core x 400 Sq mm LT UG XLPE Aluminium armoured cable as per BIS specification IS 7098 Part I or(latest amendments ) along with end terminations. | — | — | — | 45,000 | |
| — | 1000.00 | — | — | ||
| Supply and laying of 4 core 120 sq mm cross linked polyethylene (XLPE) insulated LT UG cable, PVC outer sheathed,armoured with galvanized round steel wire or steel strip and with aluminium conductor suitable for rated voltage at 1100 volts grade and conforming to IS:7098 (Part- 1)/1988 with am dt. no. 1,2 & 3 (reaffirmed 2005) or latest. Make:Polycab/Finecab/Finolex/Havells. | — | — | — | 6,74,000 | |
| — | 500.00 | — | — | ||
| Supply and laying of ISI marked 4 core 50 sq mm cross linked polyethylene (XLPE) insulated LT UG cable, PVC outer sheathed, armoured with galvanized round steel wire or steel strip and with aluminium conductor suitable for rated voltage at 1100 volts grade and conforming to IS:7098 (Part-1)/1988 with am dt. no. 1,2 & 3 (reaffirmed 2005) or latest. Make: Polycab/Finecab/Finolex/Havells. | — | — | — | 1,58,500 | |
| — | 1500.00 | — | — | ||
| Supply and laying of ISI marked 4 core 25 sq mm cross linked polyethylene (XLPE) insulated LT UG cable, PVC outer sheathed, armoured with galvanized round steel wire or steel strip and with aluminium conductor suitable for rated voltage at 1100 volts grade and conforming to IS:7098(Part-1)/1988 with amdt. no. 1,2 & 3 (reaffirmed 2005) orlatest. Make:Polycab/Finecab/Finolex/Havells. | — | — | — | 3,01,500 | |
| — | 3200.00 | — | — | ||
| Supply and running of 8 SWG GI wire is to be laid for earth continuity | — | — | — | 38,400 | |
| — | 400.00 | — | — | ||
| Providing and fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc. including cutting,bending, drilling, welding, riveting etc.treated with anti-rust treatment and dulypower coated as per the above specification. | — | — | — | 1,09,600 | |
| — | 100.00 | — | — | ||
| Supplying and erecting of any size electrolyte copper patti or bar in bus bar chamber / in panel or any other purpose,500 V with require capacity with 99.9% copper purity with fixing arrangement(like lug or bottle type lug) to both theend with high grade polyolefin insulation sleeve complete. | — | — | — | 1,24,300 | |
| — | 1500.00 | — | — | ||
| Supply and laying of GI perforated cable tray of size 300 mm x 50 mm x 2 mm Thick. | — | — | — | 14,55,000 | |
| — | 100.00 | — | — | ||
| Excavation of cable trench 30 cm wide x90 cm deep in all types of soils for HT/LT UG cable as per specification No.Y/E.cable laying/6/99 annexed. | — | — | — | 13,000 | |
| — | 200.00 | — | — | ||
| Cutting of esphated road/ concrete /cement /under the track etc., and excavation of cable trench 30 cm wide x 90 cm deep road etc., for laying of HT/LT UG cable. After laying of cable the trench should be brought to its original position by providing tar/ concrete/cement as per the site conditions and as per directions of Rly.Engineer. | — | — | — | 43,200 | |
| — | 20.00 | — | — | ||
| Supply and erection of earth electrode as per the enclosed specification. | — | — | — | 80,820 | |
| — | 5.00 | — | — | ||
| Supply, fixing, testing and commissioning of Microprocessor Release2 00-250 A ; 4 Pole, MCCB suitable for operation on 415V,50 Hz 3 Phase AC supply in LT Panel with supply of all connected accessories and allied materials as per specification attached.Make: L&T/Legrand/Havells. | — | — | — | 94,020 | |
| — | 10.00 | — | — | ||
| Supply, fixing, testing and commissioning of Microprocessor Release 160 A ; 4Pole, MCCB suitable for operation on 415V,50 Hz 3 Phase AC supply in LT Panel with supply of all connected accessories and allied materials as per specification attached.Make: L&T/Legrand/Havells. | — | — | — | 1,46,280 | |
| — | 20.00 | — | — | ||
| Supply, fixing testing and commissioning of 4 Pole MCCB 100A suitable for operation on 415 V, 50 Hz 3 Phase AC supply in LT Panel with supply of all connected accessories and allied materials as per specification attached. Make:L&T/Legrand/Havells. | — | — | — | 61,500 | |
| — | 8.00 | — | — | ||
| Supply of Digital AC/DC Clamp Meter with DC Voltage Range 0-600 V; DC Current Range 0-600A; AC Voltage Range 0-600V & AC Current Range 0-600 A conforming to specification enclosed. Make:Meco/Rishab/Stanlay | — | — | — | 67,432 | |
| — | 8.00 | — | — | ||
| "Supply of 4 DIGIT EARTH RESISTANCE METER Make : WACO MEASURABLE RANGES - 1 TO 1999 OHM, MEASURABLE EARTH VOLTAGE RESOLUTION- 1000 Volts. Make - Fluke, Metravi & Rishab. | — | — | — | 68,056 | |
| — | 120.00 | — | — | ||
| Design, Fabrication and supply of 16 watts LED pit lights fitting, (10W+4W+2W) Aluminum die cast with IP 67 Protection necessary hardware material suitable to workon 24 V DC/48V AC. 3 Dimensional type forpit lighting as per latest Specification) Note Prier Approval to be taken including all accessories. | — | — | — | 5,10,720 | |
| — | 120.00 | — | — | ||
| Fixing, connecting, testing and commissioning of 16 W LED pit lighting (10W+4W+2W) with IP 67 protection necessary hardware material for pit lighting including all accessories. | — | — | — | 11,760 | |
| — | 120.00 | — | — | ||
| Design, Fabrication and supply of 16 watts LED Cat walk lights fitting, (4W+8 W+4 W) Aluminum die cast with IP67 Protection necessary hardware material suitable to work on 24 V DC/48 V AC. 3 Dimensional type for Catwalk lighting as per latest specification) Note Prier Approval to be taken including all accessories. | — | — | — | 5,10,720 | |
| — | 120.00 | — | — | ||
| Fixing, connecting, testing and commissioning of 16 W LED cat walk light fitting (4W+8W+4W) with IP 67 protection necessary hardware material for Cat walk lighting including all accessories etc. | — | — | — | 10,560 | |
| — | 20.00 | — | — | ||
| Design, Supply, of Control Panel Unit containing 3 Nos. SMPS POWER SUPPLY UNITS enclosed in sheet steel enclosure with all connected safety accessories, Indications & Controls, dedicated for the High Power LED Based 16 W LED Pit/Catwalk Lights as per following Specification PANEL containing 3nos. of SMPS units, Each will be suitable for 7 Nos of Pit/Catwalk lights total 7x3=21Nos ofPit/Walk lights) Specification for each SMPS Unit: Input Voltage: 180V to 260 Volts, Output Voltage :24 Volts dc+/- 1% Regulation-C,Output Current: 10 Amps Each SMPS,Protection : Short Circuit Proof, Over Voltage Protection, Ripple:< 200 mv including all accessories. | — | — | — | 4,44,920 | |
| — | 20.00 | — | — | ||
| Fixing, connecting, testing and commissioning of SMPS BASED Power supply units with connected accessories etc. | — | — | — | 17,680 | |
| — | 30.00 | — | — | ||
| Supplying and erecting programmable digital almanac timer micro controller based with real time clock to operate on derived switching-ON & switching-OFF street light as per daily sunset and sunrise respectively automatically having 4 digit LED continuous time display, relay output 230V/10A with 10 hrs. battery back upand manual over drive facility capable to drive different capacity contactors timer erected in provided M.S. box in an approved manner. | — | — | — | 1,76,640 | |
| — | 60.00 | — | — | ||
| Supply and fixing of 40 W LED type weather proof street light fitting complete with all accessories and conforming to specification no. SCR/LED (OD) LIGHTFITTINGS/003 (Amdt.3)-2017 or latest. Make: Bajaj/Havells/Philips/Surya . | — | — | — | 1,60,560 | |
| — | 20.00 | — | — | ||
| Supply, fixing and connecting of 750 mm (30") sweep wall mounting air circulator with all connected accessories. Make :Crompton/Havells/Bajaj/ Usha. | — | — | — | 1,40,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC2022works.pdf
ATTACHMENT
ACS1to10merged.pdf
ATTACHMENT
TB37202526NEDBLT.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .