REPAIR TO FLOOR JOINERY PLASTERING WORK SANITARY AND PLUMBING WORKS ETC AT NOFRA NAVY NAGAR AYUDH VIHAR II SANDHANI STATION GYM AND GE OFFICE COMPLEX UNDER AGE BRI AT NAVAL STATION KARANJA

Amount

Notes : (i) The work consists of 01 job as under:- JOB (A) : TPP 20242025 Ser No. 10 (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department. ITEMS FOR JOB 'A'

Note:- The Unit Rate quoted in r/o Ser item No 1.02 to 2.51 are deemed to include for the following and nothing extra will be paid for these works: 1. Supplying, erecting and use of scaffolding upto required height (max 25 to 30m) or upto 8th floor height with necessary H-frames, pipes, couplers, buckles, bracing, top platform with support railing at top etc. at all levels of building including carriage of the materials to the location, erecting, fixing the scaffolding and dismembering the same after working and taking away the scaffolding materials etc. complete as per direction of Engineer-in-charge. 2. Supplying, erecting & use of temporary bamboo scaffolding around the building as required. The scaffolding is to be secured properly in position by bracings, ties clamps, etc. complete including providing and erecting working platform at all heights as required, including removal after completion of work all as per direction of Engineer-in-Charge.

Dismantling floor hearth or wall (ceramic/mosaic) tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

S&F Non Skid coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 20mm thick screed in CM(1:6) complete all as specified and directed.

S&F Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick backing coat in CM(1:4) on fair face of brick or concrete surface complete all as specified and directed.

M&L Vitrified Ceramic tiles (dark shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed in CM 1:4 to recieve tiles complete all as specified and directed.

M&L Virified Ceramic tiles (dark shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:3 to recieve tiles complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 40mm thick, PCC 1:3:6, type C-2 using 20mm graded stone agg finished even and smooth without using extra cement as in plinth protection complete all as specified and directed.

M&L100 mm thick, Cement concrete 1:2:4, type B2 using 40 mm graded stone aggregate as in pavings/floorings and similar work complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons, cills, dado, skirting etc. laid bedded & pointed in any mortar complete all as specified and as directed.

M&L Green marble 18-20 mm thick as in (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking plateform and like in CM 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match over & including 20 mm thick screed/backing coat in CM 1:3 complete all as specified and as directed.

M&L Machine cut kota stone slab 20-25 mm thick as in flooring, laid over and including 20 mm thick screed bed in CM 1:3 set and jointed in neat cement slurry and pointed with cement and pigment to match the shade of the slab incl rubbing and polishing complete all as specified and as directed.

M&L Machine cut kota stone slab 20-25 mm thick as in vertical surfaces such as riser of steps, skirting, dado and pillar etc., laid over and including 10 mm thick backing coat in CM 1:3 set and jointed in neat cement slurry and pinted with cement and pigment to match the shade of the slab incl rubbing and polishing etc., complete all as specified and as directed.

M&L Granite(of any type) tiles 18-20mm thick as in floors and similar works over including 20mm thick cement screed in CM 1:3, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite stone incl cutting, polishing complete all as specified and directed.

M&L Granite(of any type) tiles 18-20mm thick as in skirting/dado and similar works over including 10mm thick screed/backing coat in CM 1:3, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and pigment to match incl cutting, polishing complete all as specified and directed.

M&L exterior grade fibre reinforced heavy duty cement concrete designer tiles 23+2mm thick layer colour pigment as per 15 1237-1980 (Reaffaired in 2006) design as CHITRA type (samples approved by GE) over and including 20mm thick screed bed in CM 1:3 complete all as specified and directed.

Taking down chowkats or frames including shutter (without taking off shutters from the frame) area n exc. 1.5 Sqm each complete all as specified and directed.

All as per BOQ serial item No. 1.17 above but area exc 1.50 Sqm n.exc 4 Sqm complete all as specified and directed.

Taking down shutters of any description area exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

Taking down shutters of any description area exc 1 sqm and n exc 2 sqm each and refixing in same opening complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, star lock, rubber beading complete all as specified and directed.

S&F in repairs aluminium anodised grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC15) of approved design/pattern(DG 104), with approved standard section and fixed to existing window frame with CP brass/stainles steel screwnot less than 50mm and @ 200mm c/c, incl cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised alu standard section ( 28mm x 19mm x 2mm thick)around the opening, complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm(double rebat) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete all as specified and directed. Note :- SS dash fasteners shall be measured and paid seperately.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length ccomplete all as specified and directed. Note :- (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately).

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete all as specified and directed. Note :- SS dash fasteners shall be shall be measured and paid seperately.

S&F 150mm long and 12mm dia stainless steel fasteners with round shape head complete all as specified and directed.

M&L 2nd class HW, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chanbered, put together with glue pinned at joints complete all as specified and directed.

S&F 35mm thick IInd class HW plain, framed, factory made panelled shutter(two panel) with lock rail and panel of 9 mm B.W.P. commercial veneering particle board on both faces. The size of rail and stile as per IS : 1003(Part-1), kiln in seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick 2nd class HW, glazed and skelton shutters open rebated and prepared to receive glass / gauge (without sash bar) edges of forming plain chamfered orrounded fitted with cut and mitred bead for securing glass / gauge etc size of shutter as per SSR part-1 section 8 clause 8.24(a) complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded wood grain printed PVC sheet used 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90o) used instead of exposed portion of PVC sheet beading panelling of wood grain printed PVC sheets to be fitted in the MS frame welded sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supling & fixing in the frame at the site as per specification and drawing shown in SSR Pt-I complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube and edges will be painted to match with printed sheet fixing in opending as per specification and drawing etc complete all as specified and directed.

S&F MS butt hinges100mm long medium weight, cold rolled complete all as specified and directed.

S&F 100 mm long ,Butt hinges, extruded aluminiumalloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F 125 mm long extruded alu alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 150 mm long extruded alu alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F 150mm long Aluminium,anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 200mm long Aluminium,anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.

Preparation of new wooden surfaces over 10cm width or girth, not otherwise described and M&L for applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Rim latch with 2 levers, of brass body, polished bright, stove enamelled finish; with brass knob or lever handle etc complete all as specified and directed.

S&F aluminium louvers with levers and locking arrangements suitable for fixing 100mm wide 4 to 6 nos frosted glass complete all as specified and directed

S&F in repairs star lock for window incl all necessary fittings complete all as specified and as directed.

S&F in repairs aluminium windows bearing per any size of windows (including taking and refixing the same position) complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from any frame surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing complete in square n exc 0.50sqm each complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing complete in square exc 0.50sqm each complete all as specified and directed.

S&F 4mm thick frosted glass, ordinary quality and glazing with oil putty of any size pane complete all as specified and directed.

Demolition of wall stone/brick masonry built in cement mortor including all quoins arches pillars etc, completed all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 completed all as specified and directed.

M&L Brick work with burnt clay bricks sub class ‘B’ brick straight or curved on plain to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L 20 mm thick polymer modified ready mix cement based plaster on external surfaces incl WPC @ 3% by weight of cement complete all as specified and directed.

M&L 5 mm thick polymer modified ready mix cement based plaster on ceiling surfaces complete all as specified and directed.

M&L 15 mm thick ready mixed cement base plaster on internal surfaces on brick or concrete surfaces complete all as specified and directed.

M&L for complete removal of existing treatment of old plastered surface of walls and for applying one coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Preparation of newly plastered surfaces or previously untreated surfaces of ceiling and M&L for applying three coats of white wash on ceiling, complete all as specified and directed.

Preparation of newly or untreated plastered surface of wall & M&L for applying two coats of oil bound distemper (OBD) over a coat primer complete all as specified and directed.

Taking up or down 15mm dia CPVC/GI Tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm dia CPVC/GI Tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 25mm dia CPVC/GI Tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed.

S&F Galvanized steel tubing 15 mm bore medium grade with fittings to walls with hooks, ceiling or laid on floor complete all as specified and directed.

S&F Galvanized steel tubing 20 mm bore medium grade with fittings to walls with hooks, ceiling or laid on floor complete all as specified and directed.

S&F 20mm bore dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with al fittings to walls with hooks, ceiling or laid on floor complete all as specified and directed.

S&F of 25mm bore dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings to walls with hooks, ceiling or laid on floor complete all as specified and directed.

S&F in repairs, 10litre capacity PVC flushing tank,, syphonic action type, flushing cistern, low level, white, with inlet, ball valve,pvc flush pipe, float and handle incl brackets and waste pipe complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan padestel pattern white including connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia with mild steel chromoum plated hinging and 'P' or 'S' trap device complete all as specified and directed.

S&F in repairs vitreous China squatting pan Orissa pattern, size 580 x 440mm white, with integral foot rest including provision of lime concrete bedding and connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floors complete all as specified and directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs Chromium plated toilet paper holder including fixing arrangement complete all as specified and directed .

S&F in repairs Chromium plated soap dish including fixing arrangement complete all as specified and directed .

S&F in repairs CI Floor trap long neck 100 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1, 1:2:4 complete all as specified and directed .

S&F in repairs CI Nahani trap long neck 100 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1, 1:2:4 complete all as specified and directed .

M&L for Petty repair to plain cement concrete type B1 (using 20mm graded aggregate) 1:2:4 in floor,column , beam,window cill,door cill,balcony rep etc area n. exc 2 sqm of any height of bldg using scaffolding including matching to existing surfaces complete all as specified and directed.

M&L for Petty repairs to cement plaster in CM 1:4 as in wall,ceiling ,column , beam,window cill,door cill,balcony rep etc area n. exc 2 sqm any height of bldg using scaffolding including matching to existing surfaces complete all as specified and directed.

M&L for Petty repairs to alginment for aluminium section/wooden of windows/ joinery doors including all necessary fittings as required such as hook & eye, hinges, tower bolts, siliding door bolt, rollers required for sliding repairs, handles including silicon gun paste around windows screws resecuring or easing & adjusting aluminium door/window shutter such as tightening/provn of fasterners, hinges, rubber gasket, rubber beading, bottom bearing( like roller of window/door,butt hinges ,handle,tower bolt, bottom bearing,rubber beading , bow handle etc complete) and clips etc (including taking and refixing the same position) complete all as specified and as directed

M&L for Petty repairs to wooden door,PVC door, cupboard door,wardrobe door shutter including roller ,windows etc with minor repair and aligment to openable with assessories if requred any ( like rooler of cupboard door ,butt hinge ,handle,tower bolt, bearing, beading, bow handle etc complete) (including taking and refixing the same position) complete all as specified and directed.

M&L for Petty repairs to leakage of bib taps, pillar cock stop cock PVC connection waste pipes float valves, angle valve, concealed valve GI union joints of GI pipe Re-fixing of bottle trap etc by changing the PVC washers/Sheet washers,spindle or any other minor accessories etc (including taking and refixing the same position) complete all as specified and directed

M&L for Petty repairs to refixing the existing Wash hand basin and Sinks made of stainless steel 1mm thick kitchen flat back with including fixing cantilever CI/Angle iron brackets embedded in concrete block including connecting waste coupling 32mm bore, including bedding, waste fitting, waste pipe in cement mortar on to dwarf wall and connecting union to pipe, filling gap in white cement and all neccessary fittings to fixed in repair (including taking and refixing the same position) complete all as specified and directed.

M&L Petty repair to high or low level flushing cistern by adjusting the float valve leaking of PVC connection, PVC bend including replacing of rubber washer check nuts plunger etc any type of flush (including taking and refixing the same position) complete all as specified and directed.

M&L for Petty repairs to wall mixer,basin mixer,sink mixer etc including spindle, rubber washer etc (including taking and refixing the same position) complete all as specified and directed.

M&L for Petty repairs to internal water/external inlet water GI pipe line n exc 1 RM any type including socket,elbow,nipple ,with repair to water blockage , pipe line leakage (arreat the leakage incl all fitting) including concealed water tubing etc at of any height using scaffolding (including taking and refixing the same position) complete all as specified and directed.

M&L for Petty repairs to internal water/external inlet/concealed water pipe line n exc 1 RM any type CPVC/HDPE/KITEC including socket,elbow,nipple ,with repair to water blockage , pipe line leakage (arreat the leakage incl all fitting) including concealed water tubing etc of any height using scaffolding (including taking and refixing the same position) complete all as specified and directed.

M&L for Petty repairs to renewing glazed or ceramic tiles in patches area not exceeding 1 Sqm including removing and cleaning old tiles preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and directed

M&L for Petty repairs to toilet floor seepage n exc 2 Sqm including sunken portion treatment with water proofing compound including repair to floor trap,nahani trap , grating etc complete all as specified and directed.

M&L for Petty repairs to leakage of n exc 2 RM rain water pipe,leakage of vertical sewage CI /PVC pipe,including change of elbow,Socket,Bend with water sealent compound etc of any height of bldg using scaffolding complete all as specified and directed.

M&L for Petty repairs to fixing only of bib taps, pillar cock stop cock PVC connection waste pipes float valves, angle valve, concealed valve GI union joints of GI pipe Re-fixing of bottle trap etc by and any other minor accessories etc complete all as specified and directed

M&L for Petty Repairs to any type any size of balcony grill of any height including hand rail with cover of PVC including welding, dismentling ,fixing in cement concrete in 1:2:4 and matching to existing surfaces complete using 16/20 mm square/round bar including painting complete all as specified and directed .

M&L in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs PTMT cabinet with mirror of size 555x450x124mm complete all as manufacures instruction.

S&F in repairs Aluminium anodised tubular tower rail, 20 mm dia, D type, 60 cm long between flanges with brackets complete all as specified and directed.

S&F in repairs 150mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding, waste fitting, waste pipe in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x160mm complete all as specified and directed.

S&F in repairs 15mm bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs Brass Chromium plated wall /WHB/sink mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed .

S&F in repairs 15mm bore stop valve cast copper alloy with handle screwed both ends for GI out let/inlet pipe or for union including threading to existing pipes on both ends complete all as specified and directed

S&F in repairs 20mm bore stop valve cast copper alloy with handle screwed both ends for GI out let/inlet pipe or for union including threading to existing pipes on both ends complete all as specified and directed.

S&F in repairs 15mm angle cock with flange cast copper alloy, chorminium plated, fancy type, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs Wash hand basin flat back 550x400mm vitreous china (white) with cantilever CI/Angle iron brackets embedded in concrete block including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, complete all as specified and directed.

S&F in repairs waste coupling 32 mm brass chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed

S&F in repairs waste coupling 40 mm brass chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed

S&F in repairs PVC connections 15 mm size with brass nuts both side of length 450 mm complete all as specified and directed .

S&F in repairs plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and fixed complete all as specified .

S&F in repairs PVC waste pipe 32 to 40 mm for WHB/Sink up to floor trap and fixed complete all as specified and directed.

S&F in repairs brass chromium plated overhead shower 150 mm size with or without swivel joints including fixing to steel pipe of 15mm bore complete all as specified and directed .

S&F in repairs 20 mm bore PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in position complete all as specified and directed.

S&F in repairs 25 mm bore PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in position complete all as specified and directed.

S&F in repairs brass chromium plated towel rail 20mm dia, D type, 60cm long between flanges fixed with CP brass screws including wooden/plastic beads complete all as specified and directed.

Dismantling wall and celling boards (fibers pulp insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed.

S&F Anodised alunimun size 605 x 605 mm snap grid frame work for false ceiling complete all as specified and directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S&F 10mm thick without relevant PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. complete all as specified and directed.

S&F12 mm thick Pre-laminated particle board, exterior grade, prelaminated on both side with decorative choice lamination and other side balancing white lamination including fixing of teak wood beading on open edges in any position such as cup boards, drawers shutters etc. fixed with screws and incl all fittings, tower bolt, handle, knob, magnet to timber frame work complete all as specified and directed.

S&F 18/19mm thick Pre-laminated particle board, exterior grade, prelaminated on one side with decorative choice lamination and other side balancing white lamination including fixing of teak wood beading on open edges in any position such as cup boards, drawers shutters etc. fixed with screws and incl all fittings, tower bolt, handle, knob, magnet to timber frame work complete all as specified and directed.

S&F in repairs 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S &F in repairs 30mm width Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-Painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.

Taking down rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc including cleaning complete all as specified and directed.

S&F110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in fixed to walls complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (single T) equal or unequal any radius complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction double, (double T) equal or unequal any radius complete all as specified and directed.

S&F 110mm bore PVC (SWR) cowl any radius complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in fixed to walls complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

Preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

S&F in repairs grating square/rectangular 150mm size of PTMT (Minimum weight 100gms) complete all as specified and directed.

S&F MS hold fast similar small articles confirming to Fe 290 Gde -E- 165 complete all as specified and directed.

Preparation/cleaning of old/new chequred tiles, Interlocking tiles and any floor surfaces of any descriptions and any position & M&L for applying one coat of terra cotta exterior grade paint on floor/tiles etc complete all as specified and directed.

Preparation old surfaces of painting brick, stone, concrete, AC sheet, GI sheet, plaster surfaces of any description over 10cm width or girth and M&L for applying two coats of sythentic enamel paint complete all as specified and directed.

Preparation old surfaces of painting brick, stone, concrete, AC sheet, GI sheet, plaster surfaces of any description over 10cm width or girth priming paints plaster coat and M&L for applying one coat of sythentic enamel paint complete all as specified and directed.

M&L for injection chemical GLYPHOSPHATE (4% Concentration) of 20 ml or till refusal by making cut / injection in the stem of plant of roots at 30 mm and sparaying with solution 25 ml GLYPHOSPHATE (4% concentration diluted with 1 ltr of water) and removing the Plant / vegetation of following girth including penetrated roots complete including necessory scaffolding etc for plants / vegetation of size 0-20 cm girth complete all as specified and directed for buildings upto and including 4 storeys complete all as specified and directed.

S&F in repairs aluminium anodised tubular tower rail, 20mm dia with brackets etc complete all as specified and directed.

M&L In repairs for Teak parquet of size& shade as directed & Pattern approved By GE (matching existing shade and pattern) including fixing ,sanding and polishing of the same with water based polish and fixing with grove of each other including dismentling of old wooden flooring complete all as specified and directed.

M&L French polishing on surface of any description, width or girth incl cleaning and preparing the surface incl a coat of wood filler on old/new works with one or two coats complete all as specified and directed.

S&F Readymade pulley operated clothes drying system incl of four aluminium pipes 9 feet long each(4 pipes set), channel assembly, locking system ropes and all fixing materials complete all as specified and directed.

S & F in repairs stainless steel kitchen plate rack of size 600x600 or 600x900complete all as specified and directed.

S&F in repair aluminium curtain rod with fixing brackets fixed with steel screws & PVC rawl plugs/grips as required complete all as specified and as directed .

S&F in repair Vitreous China urinals, half stall, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe including urinal spreader complete all as specified and as directed .

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 12 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 20 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

SAI ENTERPRISES (BID ID -3089211)

S.P.TRADERS (BID ID -3089249)

K N CONSTRUCTION (BID ID -3086599)

kalakriti enterprises (BID ID -3081006)