Electrification of Balance work of Auditorium Hall at Govt. Degree College for Women at Parade Jammu. (2nd call).

Amount

Supply, installation, testing & commissioning of 1.1 KV PVC insulated and PVC sheathed XLPE Power Cable of following size etc. along with providing & fixing of Aluminium thimbles, U Clamps, Insulators etc as required including carriage upto site of work.

185 Sq.mm 3.5 Core Armored

150 Sq.mm 3.5 Core Armored

Supply, installation, testing and commissioning of 225 KVA Servo Motor controlled oil colled Automatic Voltage Stabilizer to operate on un balanced 3 Phase load (Transformer oil to be cooling medium and shall be ISI marked IS-335 with latest amendments) and suitable to operate on unbalanced input phase voltage of 120 to 280 volts and delivering voltage of 415 ± 1 %, 3 Phase, 50 Hz ± 3 % AC power supply. The stabilizer shall be copper wound in sheet steel case, duly painted and filled with transformer oil. The voltage stabilizer provided with 3 phase, 500 Amp Aluminium bus bar, MCCB FP 400 A A 50 KA and on load change over switch 400 A FP required during by passing the voltage stabilizer. Complete with the comprehensive replacement warranty for two years after DLP of 1 year.

Supply, installation, testing & commissioning of maintenance free copper earthing system with 3 mtrs. Electrode 40 mm dia with minium 2mm thick and does not require manual additional of water. The electrode shall be pre-filled with hygroscopic powder and provided with suitable breathing and leaching ports at the ends. the electrode shall be surrounded by suitable powdered form of BEE MOIST so as to provide maximum contact between the electrode and the compund. The compound should be eco-friendly and having ROHS certification. The earthing pit should be covered with PVC cover.

Providing and laying of 25 x 5 mm copper strip from copper rod up-to the main panel.

Construction of PCC Platforms (Civil Work) including shed for Servo and D.G Set with coloured CGI Sheets and MS Pipe/Angles Completely (Complete Job)

Supply, intastallation, testing & commissioning of 125 KVA Capacity radiator cooled DG Set with suitable capacity engine directly coupled with alternator for 415 volt, 3 phase, 50 Hz, 4 wire, generation system complete with accessories, fuel oil tank & control panel etc as required and sound proof acquastic enclosure for the DG SET, including supply, fixing of antivibration pads suitable for 125 KVA DG Set as per standards of Engine manufacture, provision of conrol cable from engine to control panel to engine. Provision of pipe fuel pipe line of suitable size fron fuel tank to engine and over flow pipe engine to fuel tank complete gate valve and fitting leader maker etc. Supply , Intallation of starting batteries of suitable AH as recommended by manufacterer Heavy duty complete as required at site complete with stand and battery charger residentials sylencer sutaible for diesel engine exhaust pipe line complete complete flange, bend, flexible pipe all as required and as directed by engineer incharge.

DIESEL ENGINE (CPCB-2 NORMS COMPLANT) 4 Stroke, Radiaotr Coolled, Diesel Engine Model Having Following Arrangement :- Flywheel with Starter Ring for Generating Set Air Filter , Lube Oil Cooler Assembly with accessories. Exhaust air manifold Fuel Fiter Lube Oil Filter Exhaust Gas Turbocharger with after Coller Day tank for fuel with markings ECP Panel mounted on a separate frame. Radiator with Pusher Type Fan, With Fan Guard, Coolant Pump 24V Electrical Starting System with Starter Motor and Battery Charging Alternator Engine Mounting Supports Make Engine:- Cummins, Kirloskar & Volvo or equivalent

ALTERNATOR Rated at 125 KVA, 415 Volts, 3 Phase, 4 Wire, 0.8 P.F (lag), 50HZ, 1500 RPM, IN Accordance with IS 4722 as per following Specification Rating: Suitable for an over-load of 10% for 1 hour in every 12 hours operation. Voltage Regulation: Provided with fast response thyristor type electronic automatic voltage regulator, which holds output voltage within desired limits . (+/- 1%). Excitation: Self excited-self regulated. Alternator Loading: Suitable for taking rated load immediately after machine reaches rated voltage and speed. Vibration: Suitable for direct coupling with Engine and mounted on common M.S. Channel base frame. Enclosure: Screen protected drip proof enclosure with IP – 23 degree of protection. Cooling: Air Cooled type with radial fan mounted on Rotor. Winding and Insulation: Insulation class H as defined in IS – 4722 Make Alternator:- Kriloskar, Marshall, & Leroy Somer or equivalent

MS Base Frame Suitable for Mounting of the Offered Engine and Alternator. Day Fuel Tank of Standard Capacity Complete Fuel Gauge, Inlet/Outlet Connections, Drains Plug, Etc 2 Nos 12 Volts DC Battery of SUITABLE Capacity with Leads 1 Set of AVM Pads Fitted in Base Frame. AMF Panel with standard acessories etc as required at site with two no. of 200 Amp MCCB.

Supply, installation, testing & commissioning of GI Electrode Earthing with 50mm dia and 3 meter length, with 3mm thick the electrode should be hot-dip galvinised. The GI Electrode shall be pre-filled with Cristaline Conductive Materila (CCM). The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact betwen the electrode and compound should be eco-friendly and having ROHS certification GI Electrode Earthing should be maintinance free and does not require regular manual addition of water GI Electrode shall be tested from CPRI. The earthing pit should be covered with PVC cover.

Providing and laying of 25 x 5 mm G.I strip from G.I rod upto the main panel.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/recessed steel/PVC conduit as required.

3 x 1.5 sq. mm

3 x 2.5 sq. mm

3 x 4 sq. mm

3 x 6 sq. mm

Supplying and fixing 5 amps to 32 amps rating 240/415 volts "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single Pole

Single Pole and Neutral

Supplying and fixing following rating 240/415 volts "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

SPN 40 Amp.

SPN 63 Amp

TPN 32 Amp

TPN 63 Amp.

ELCB 32 Amp-300 milliamp

Supplying & fixing of following way horizontal type three pole and netural, sheet steel, MCB distribution board, 415 volts,on surface/recess complete with tinned copper busbar, neutral bus bar, earth bar,din bar, interconnection, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolater)

8 way (4+24), (Double door)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (ISI Make)

Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board inculding drilling holes in cubicle panel, making connection etc. as required. (ICU = ICS = 100%)

400 A,50KA,FPMCCB ICU=ICS 100% ( Adjustable)

200 A,36KA,FPMCCB ICU=ICS 100% ( Adjustable)

CT Set of suitable rating

Indicating Lamp

MCB Strip for 12 Nos. MCB's

Multifunction metre

Alminium Bus Bar 400 amp

Alminium Bus Bar 600 amp

Change Over Switch 250 Amp. F.P ( FRONT OPERATED)

M/S NEW LIFE ENTERPRISES