Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹19,700
Closing Date
4 Dec 2023, 8:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
N Nataraja
Repair & Maintenance to Sub-Division Office, BESCOM at 66/11kV Sub-station, Malur.
KPTCL/2023-24/BD/WORK_INDENT299
KPTCL/2023-24/BD/WORK_INDENT299
Open
Buildings
Two Tender Document System(Two Cover)
KPTCL SEE Transmission And Mantainance BRAZ Circle
5 documents required · 5 mandatory
The bidders shall have to upload existing commitments and on-going works should be countersigned by not below the rank of an Executive Engineer or equivalent.
The bidder shall have to upload the Turn over statement FY 2017-18 to 2021-22 duly certified by the Charted Accountant with UDIN number and submit the certificate of Income tax returns & balance sheets i.e., FY 2017-18 to 2021-22.
The bidder shall be registered KPWD Civil contractor (KPWD License)
The Bidder shall have to scan and upload address proof details along with contact details for communication if any
The bidder shall have GST registration certificate issued by the competent authority
As per NIT and KW1
₹500
₹19,700
18 Nov 2023
18 Nov 2023
5 Dec 2023
1 Dec 2023
Repair & Maintenance to Sub-Division Office, BESCOM at 66/11kV Sub-station, Malur.
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:6 including cutting the patches in proper shape and replastering the surface of the wall includi...
Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:4 including cutting the patches in proper shape and replastering the surface of the wall includi...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Cleaning of terrace/chajje/rain water pipes etc., Mazdoor light (Vol- 1, P.No- A-52 , SL.No- IV-2)
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...
Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...
Repairing and fixing shutters (panelled or glazed) to doors, windows, ventilators and cupboards. (Vol-2, P.No-183 , SL.No- 20.104)
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes including cost of materials, labour, usage charg...
Cleaning of glazed tiles with washing soda & polishing. (P.No- 268, SL.No- 37.34 of KPWD Bengaluru circle SR 2018-19)
Providing and fixing brass bib cock of approved quality : 20 mm nominal bore (Vol- 2, P.No- 115, SL.No- 13.2.2)
Providing and laying of 1.5 mm thick SBS modified self adhesive single stick waterproofing membrane, with minimum elongation of 300% and puncture resistance of 200 N (as per ASTM E154), with an overla...
Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak ...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, wi...
Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This includes jointing o...
Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This includes jointing o...
Supplying and fixing 3'' PVC Nahani trap
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the...
Labour charges for plumbing works.
A) Plumber (Vol- 1 , P.No- A-49 , SL.No- 5 )
Labour charges for plumbing works.
B). Helper (Vol- 1 , P.No- A-52 , SL.No- IV.2 )
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sh...
Wiring for lighting/power circuit using one of FRLS PVC isulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-...
Wiring for lighting/power circuit using one of FRLS PVC isulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-...
Wiring for lighting/power circuit using one of FRLS PVC isulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-...
Wiring for lighting/power circuit using one of FRLS PVC isulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying And fixing/replacing of 6/16/32A electrical
accessories on existing switch board, 6A SP Switch (KPWD SR 2021-22, P-6, I-3.14.1)
Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box,elbows, screws at an interval of 300 mm .... etc. as required. 25 mm (Vol-6 P....
Supplying and fixing PVC/metal conduit Deep junction box (Vol-6 P.No- 1 of PWD Electrical SR Part-1, SL.No- 1.5.2)
Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size 80Mm conduit using necessary machine screws (KPWDEle SR 2019-20, P-10, I-3.10.1)
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
ii) 6A Three Way socket (Vol- 6, P.No- 5 PWD Electrical SR Part-1, SL.No...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
iii) 32A DP Switch (Vol- 6, P.No- 5 PWD Electrical SR Part-1, SL.No- 3.6...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
iv) 400W Dimmer (Vol- 6, P.No- 5 PWD Electrical SR Part-1, SL.No- 3.6.5)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT R&M BESCOM, Malurl.docx
Instructions to Tenderers • 0.03 MB
KW I R&M BESCOM, Malur.docx
Tender Document • 0.09 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .