REPAIR TO KITCHEN BATHROOM FLOORING TILLING PLUMBING SANITARY FITTINGS DOOR AND WINDOW AND CONNECTED ITEMS AT OLD RS COLABA UNDER AGE BRII UNDER GE NW NAVY NAGAR COLABA MUMBAI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc complete all as specified and directed by Engineer-In-charge

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etccomplete all as specified and directed by Engineer-In-charge

Material & Labour for Brushing neat cement slurry with 3.0 kg of cement per sq. metre complete all as specified and directed by Engineer-In-charge

Material & Labour for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishescomplete all as specified and directed by Engineer-In-charge

Material & Labour non-skid coloured Ceramic tiles 300x300x6 to 7mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not excceding 0.11 sqm, in floors etc, set and jointed in cement mortar and pointed in white of coloured cement to match including 20 mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-In-charge

Material & Labour Coloured glazed ceramic tiles 300mm x 450mm x 6 to 7 mm thick on vertical surfaces set & jointed in neat cement paste and pointed in white cement mixed with pigment complete all as specified and directed by Engineer-In-charge

Material & Labour for rendering 10mm thick in cement mortar 1:4 on backing coat of wall tiles etc complete all as specified and directed by Engineer-In-charge.

Supply & Fixing in repairs for vitreous china squatting pan Orissa pattern of size 580 x 440 mm white with back inlet and integral footrest and anti syphonnage pipe including 'P' or 'S' trap and provn of lime concrete complete all as specified and directed by Engineer-In-charge by Enginner-in-Charge.

Supply & Fixing in repair Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed by Engineer-In-charge

Supply & Fixing in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratry with plugs, washers and wastes; including beading in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmX460mmXbowl size 410mm X 330mmX160mm complete all as specified and directed by Engineer-In-charge

Supply & Fixing 32 mm dia Waste coupling brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed including waste pipe complete as directed.complete all as specified and directed by Engineer-In-charge

Supply & Fixing pillar tap 15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-In-charge

Supply & Fixing PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engineer-In-charge

Supply & Fixing Unplasticised PVC pipes of pressure rating 10 kgf/cm2 of 50 mm bore fixed complete to walls, ceiling or in floors including bend and sockets etc; any type of pipe complete all as specified and directed by Engineer-In-charge

Supply & Fixing in repair PVC valveless, syphonic action type, flushing cristern, 10 ltr capacity low level, white, with inlet, ball valve, float and handle including brackets and Flush pipe of polyethylene of low or high density for low level cistern complete all as specified and directed by Engineer-In-charge

Material & Labour for CI Nahani trap dia of outlet 75mm fixed in repairs including CP Grating & jointing to waste pipe in runlead fixed in cement concrete type B 1 (1:2:4) complete all as specified and directed by Engineer-In-charge

Taking up or down GI tubing and connections 15 mm bore including cleaning for refixing or removal to store complete all as specified and directed by Engineer-In-charge

Refixing old GI tubing and connection15 mm bore in new or old position in ( Walls, ceiling, floors etc) with old accesories complete all as specified and directed by Engineer-In-charge

Supply & Fixing GI Tubing 15 mm bore medium grade with all fitting and fixed comlete to wall and ceiling or laid in floors complete all as specified and directed by Engineer-In-charge

Supply & Fixing Bib tap 15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-In-charge.

Supply & Fixing Stop valves 15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-In-charge.

Taking down cement plaster of any discription including raking out joints hacking for key scrubbing down with water etc and removing rubbish off the premises complete all as specified and directed by Engineer-In-charge

Material & Labour for rendering 15mm thick in CM 1:6 on other than fair faces of bricks work or concrete finished even and smooth without using extra cement complete all as specified and directed by Engineer-In-charge

Material & Labour for 05 mm thick plastering in CM 1:3 on concrete surface on ceiling finished even and smooth complete all as specified and directed by Engineer-In-charge

Material and labour for Preparing surfaces, plastered or unplastered new surfaces, priming plastered and other surfaces with alkali-resistant priming paint and applying two coats of distemper oil emulsion over a coat of wall care putty, white or tinted on walls complete all as specified and directed by Engineer-In-charge

Material & Labour for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed by Engineer-In-charge

Material & Labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engineer-In-charge

Dismantling of stone slabs, bedded and pointed in any mortar of any description or thickness in floors, approns etc and removing rubbish off the premises complete all as specified and directed by Engineer-In-charge

Material & Labour for granite (of any type) slab 18 to 20mm thick machine cut,bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete for kitchen plateform etc. complete all as specified and directed by Engineer-In-charge

Supply & Fixing in repairs Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to doors,windows shutter, with wooden beading (any size) with aluminium wire staples and removing old beading,complete all as specified and directed by Engineer-In-charge.

Supply & Fixing in repair Brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long complete all as specified and directed by Engineer-In-charge

Supply & Fixing 125 mm dia CP Brass chromium plated shower Rose with shower arms with or without swivel joints , any size complete all as specified and directed by Engineer-In-charge

Supply and fixing in repair stainless steel 20-25 mm dia Curtain Rod fancy type as approved finish including Bracktes for supports & fancy type knobs at both end compete all as specified and directed by Engr-in -Charge

Taking down chowkats with shutter (without taking shutter from the frame) not exc 1.5 sqm each complete all as specified and directed by Engineer-In-charge

Supply & Fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 2omm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with sovent cement, suppling & fixing in the frame at site complete all as specified and directed by Engineer-In-charge.

Supply & Fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed by Engineer-In-charge

Supply & Fixing 75 mm size stainless steel butt hinges (ISI Marked)complete all as specified and directed by Engineer-In-charge

Supply & Fixing extruded aluminium alloy handles 150mm size, fabricated type, anodised complete all as specified and directed by Engineer-In-charge

Supply & Fixing Aluminium, anodised, barrel tower bolts 150mm size of extruded section and fixed complete all as specified and directed by Engineer-In-charge

Supply & Fixing for machine cut kota stone slab single piece length as in jambs/cills of windows 22-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing (Note : kota stone single pice of Cill will be fixed in two steps) complete all as specified and directed by Engineer-In-charge

Material & Labour for Screed bed or bedding layer of mortar 20 mm thick in CM 1:4 for laying floor finishes all complete all as specified and directed by Engineer-In-charge

Rounding to edges of stone slabs one edge,such as in steps, windows frame, cooking plateform,and other similar situations complete all as specified and directed by Engineer-In-charge

Supply & Fixing Anodised aluminium frame/track or shutters for windows, ventilators etc. with one or more rebates including joining cleat for fixing etc.fixed or sliding type/louvered window or ventilator without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws and locking arrangement etccomplete all as specified and directed by Engineer-In-charge

Material & Labour aluminium grill with suitable aluminium anodised frame section of ‘F’ section of size 23.4 x 15.3 x 1.4 mm thick manufactured by M/S Deco grill pattern DG-102 (80 X 66mm aperture) complete all as specified and directed

Supply & Fixing 4mm thick plain sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane complete all as specified and directed by Engineer-In-charge

Supply & Fixing Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to doors,windows shutter, with wooden beading (any size) with aluminium wire staples ,complete all as specified and directed by Engineer-In-charge.

Taking down shutters of any description n exc 1 sqm each complete all as specified and directed

Supply & Fixing Second class hard wood factory made glazed and skeleton shutters 30 mm thick, open rebatede and prepared to receive glass, gauze etc (without sash bars), edge of framing plain chamfered of rounded, fitted with cut and mitred beads for securing glass etc. size of members of shutters shall be as specified in SSR Part I, section 8.20 (a) complete all as specified and directed

Supply & Fixing extruded aluminium alloy handles 125 mm size, fabricated type, anodised complete all as specified and directed by Engineer-In-charge

Supply & Fixing Aluminium, anodised, barrel tower bolts 125 mm size of extruded section and fixed complete all as specified and directed by Engineer-In-charge

Supply & Fixing 125mm aluminium anodised plate type II gate and shutter, hooks and eyes complete all as specified and directed by Engineer-In-charge

Supply & Fixing 3mm thick plain sheet glass ordinary quality and glazing with aluminium and neoprene beads in square not exc 0.5 sqm in each pane complete all as specified and directed by Engineer-In-charge

Material & Labour for two coat synthetic enamel paint over a coat pink primer on new wooden surface of any description over 10 cm width or girth not otherwise described including preparation of surface complete all as specified and directed by Engineer-In-charge

Repair/Treatment of sunken floor slab compraises of the following specifications complete all as specified and directed by Engineer-In-charge :- (i) Material & Labour for cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. 40 mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate mixed with integral water proofing compound @ 3% by wt of cement consumed as in padding conc to achieve proper slope including 50mm dia 350mm long medium grade GI spout pipe and cutting holes in bricks or RCC wall for spout pipe & making good surface after inserting and setting spouts all as specified. (ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with integral water proofing compound @ 3% by wt of cement consumed. Fill it with water and check dampness and seepage. Where dampness/seepage is noticed, nozzles shall be fixed and grouting carried out. (iii) All junctions points of side wall where CI/GI pipes are passing through shall be sealed with epoxy puty. (iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean. (v) Material & Labour for applying two coats of polymer modified cementious water proof coating as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed. (vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound 3% by wt of cement consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout. (vii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint (Black Japan shall be paid separetely).

Material & Labour for filling with PCC 1:5:10 type E2 (1 Cement : 5 coarse sand : 10 graded aggregate 40 mm nominal size) complete all as specified and directed

Demolition of lime concrete of any description and in any position not otherwise specifically provided for and removing rubbish off the premises complete all as specified and directed by Engineer-In-charge.

Taking down CI soil/waste/vent/rain water pipes including all fittings like shoes bends swan necks etc of any dia complete all as specified and directed by Engineer-In-charge

Supply & Fixing CI soil/waste/vent pipe in any length with ears 100mm bore (sand cast) in any length with cement joints fixed to walls complete all as specified and directed by Engineer-In-charge

Fixing only CI soil/waste/vent pipe in any length with ears 100mm bore (sand cast) in any length with cement joints fixed to walls complete all as specified and directed by Engineer-In-charge

Supply & Fixing CI soil/waste/vent pipe in any length with ears 75mm bore (sand cast) in any length with cement joints fixed to walls complete all as specified and directed by Engineer-In-charge

Fixing only CI soil/waste/vent pipe in any length with ears 75mm bore (sand cast) in any length with cement joints fixed to walls complete all as specified and directed by Engineer-In-charge

Supply & Fixing CI bends (any radius) for soil/waste pipes 100mm bore diminishing pieces or tapers on walls complete all as specified and directed by Engineer-In-charge

Supply & Fixing CI bends (any radius) for soil/waste pipes 75mm bore diminishing pieces or tapers on walls complete all as specified and directed by Engineer-In-charge

Supply & Fixing CI branch piececs single (equal or unequal) ordinary or inverted (spigot or socked type) with parallel branches for 100mm bore pipe (Y or T) complete all as specified and directed by Engineer-In-charge

Supply & Fixing CI branch piececs single (equal or unequal) ordinary or inverted (spigot or socked type) with parallel branches for 75mm bore pipe (Y or T) complete all as specified and directed by Engineer-In-charge

Material & Labour applying one coat of oil bound distemper on old decorated surfaces and filling the surface inperfections such as holes, dirt, fine cracks including preparation of surface complete all as specified and directed by Engineer-In-charge

Complete removal of existing treatment, preparing surfaces, plastered or unplastered old surfaces priming plastered and other surfaces with alkali-resistant priming paint and applying two coats of distemper oil bound, white or tinted on walls incl a coat of white cement putty complete all as specified and directed by Engineer-In-charge

Material & Labour for applying one coat of synthetic enamel paint including preparation of old wooden surfaces over 10cm width/girth complete all as specified and directed by Engineer-In-charge

Material & Labour preparation of old painted surfaces over 10cm width or girth and applying one coat of synthetic enamel paint on steel surfaces complete all as specified and directed by Engineer-In-charge

Material & Labour for preparation of old surfaces of wall and applying one coat of white wash on old plastered wall surfaces complete all as specified and directed by Engineer-In-charge

Material & Labour for preparation of old surfaces of ceiling and applying one coat of white wash on old plastered wall surfaces complete all as specified and directed by Engineer-In-charge

Supply & Fixing 100mm cast iron sanitary connection socket to fit WC out-let complete all as specified and directed by Engineer-In-charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-In-charge

Supplying & fixing Framed work such as grills, gratings,plane or chequered plates etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Supply & Fixing Rolled Mild Steel Framed work as in plates (plain or chequered) for drain/manhole cover square cut or notched forming holes conforming to Fe 290 E 165 complete all as specified and directed by Engineer-In-charge

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and directed by Engineer-In-charge

Supply & Fixing factory made shutter 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc edges of framing, plain chamfered or rounded fitted with cut and mitred beads fo securing gauge etc suzes of members of shutters as specified in SSR part I section 8 clause 8.24 (a)complete all as specified and directed by Engineer-In-charge

Supply & Fixing 40 mm thick factory made Flush shutters , solid core constrution with block board core and plywood face panels, commercial type on both side complete all as specified and directed by Engineer-In-charge

Material & Labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Chage.

Supply & Fixing in repairs 150 mm extruded aluminium handles, fabricated type anodised complete all as specified and directed by Engineer-In-charge

Supply & Fixing in repairs 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engineer-In-charge

Supply & Fixing 300 mm long aluminium alloy , anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed by Engineer-In-charge

Supply & Fixing 140 mm overall length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor all complete as specified and as directed by Engr-in-Charge.

Supply & Fixing 100mm size stainless steel medium weight butt hinges complete all as specified and directed by Engineer-In-charge

(Note:- For item No 1 to 86 Work to be carried out at G+14 bldg including top roof,parapet and shaft walls, cost for scaffolding & safety measures for repairs shall be inlcuded in the rates quoted by the bidder).

satguruenterprises

M/s. MAYUR ENTERPRISES

ASHOK CONSTRUCTION

RAMESH ENTERPRISES

SHREE JAGDISH FURNITURE CO.

BOB ENTERPRISES

Shetty Construction Co

RAVINDRA SALES

RSG INFRASTRUCTURE