CERTAIN B/R REPAIRS TO HOSPITAL BUILDINGS AND REAPIR/MAINTENANCE OF JOINERY, INTERNAL WATER SUPPLY, SANITARY FITTINGS AND PLUMBING WORKS AT OTM ACCN AT CHAF BANGALORE

Amount

Taking down chowkhats or frames not exc 1.5 sqm with shutter(without taking off shutter from the frames) including taking out hold fasts and PCC bed block all as specified and directed.

Taking down chowkhats or frames exc 1.5 sqm and not exc 4 Sqm with shutter(without taking off shutter from the frames) including taking out hold fasts and PCC bed block all as specified and directed.

Taking down shutters of any description n.exc 1sqm each all as specified and directed.

Taking down shutters of any description exc 1sqm and n exc 2 sqm each all as specified and directed..

Cutting holes in brick walls built in cement mortar for inserting holdfasts or lugs to a depth exc half brick but nexc one brick from the face of jamb and making good dismantled portion in cement concrete (1:2:4) type B1 as required all as specified and directed.

All as per item No :05 but in stone masonry built in cement mortar all as specified and directed.

Mild steel work holdfast, cleat etc. for door frame etc. conforming to Fe-290 Gde E-165, complete all as specified and directed.

Taking down wooden shutters of any description exc 1 sqm but nexc 2 sqm each incl easing and adjusting and re-fixing in the same opening all as specified and directed.

Second class hard wood plain, solid, straight chowkhats, and frame wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, complete all as specified and directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplied and fixed in opening as per specification and drawing, complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.for factory made solid PVC moulded door shuters 28 to 30 mm thick (Stiles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face with particle board core, complete all as specified and directed.

Aluminium anodised barrel tower bolts of 200mm long extruded section, complete all as specified and directed.

Aluminium anodised barrel tower bolts of 150mm long extruded section, complete all as specified and directed .

19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed.

125mm aluminium anodised Hasp and staple, safety type fixed with screws, complete all as specified and as directed

Steel windows/ventilators with side hung shutters incl box type hinges, with steel handle and steel peg stay, complete with glazing bars, devetailed or welded incl painting with one shop coat of zinc chromate primer, fixed as in repairs, complete all as specified and directed.

All as item No 16 but without glazing bars, complete all as specified and directed.

Taking down existing steel window/ventilator shutters area n exc 1 sqm each and carrying out necessary servicing including welding/greasing/oiling etc for smooth functioning and taking down unserviceable hardwares and refixing with new hardwares and re fixing the window shutters in position, complete all as specified and directed. Note : (i) Note : Windows are to be fixed upto 6 stories of buildings (ii) Hardwares wherever required to be replaced shall be measured and paid seperately at supply only rates under respective items of this schedule.

Supply only mild steel box type hinges, suitable for steel windows, complete all as specified and directed.

Supply only mild steel handles , suitable for steel windows fixed with necessary nut, bolt and washers, fixed in repairs, complete all as specified and directed.

Mild steel peg stays, 300mm long , suitable for steel windows fixed with necessary nut, bolt and washers, fixed in repairs, complete all as specified and directed.

MS butt hinges, 50mm medium weight, cold rolled mild steel, and fixed as in repairs, complete all as specified and directed.

MS butt hinges, 75mm medium weight, cold rolled mild steel, and fixed as in repairs, complete all as specified and directed.

MS butt hinges, 100mm medium weight, cold rolled mild steel, fixed as in repairs, complete all as specified and directed.

Mild steel barrel tower bolts 100mm, stove enameled black, with bright bolt, fixed as in repairs, complete all as specified and directed.

Mild steel barrel tower bolts 150mm, stove enameled black, with bright bolt, fixed as in repairs, complete all as specified and directed.

Supply only mild steel barrel tower bolts 200mm, stove enameled black, with bright bolt, complete all as specified and directed.

Aluminium, anodized, barrel tower bolts 100mm of extruded section, fixed as in repairs, complete all as specified and directed.

Aluminium, anodized, barrel tower bolts 150mm of extruded section, fixed as in repairs, complete all as specified and directed.

Aluminium, anodized, barrel tower bolts 200mm of extruded section, fixed as in repairs, complete all as specified and directed.

Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 300 mm long, fixed as in repairs, complete all as specified and directed.

All as per item No 31 here-in-before but 250 mm long, complete all as specified and directed.

Mild steel pressed handles 100mm, oval type, stove enameled black, fixed as in repairs, complete all as specified and directed.

Mild steel pressed handles 125mm, oval type, stove enameled black, fixed as in repairs, complete all as specified and directed.

Mild steel pressed handles 150mm, oval type, stove enameled black, fixed as in repairs, complete all as specified and directed.

Aluminium handles, cast type, anodized 100mm, fixed as in repairs, complete all as specified and directed.

Aluminium handles, cast type, anodized 150mm, fixed as in repairs, complete all as specified and directed.

Mild steel 300mm, ordinary rat rail rod pattern springs including roller and roller plate, fixed as in repairs, complete all as specified and directed.

Aluminium body door closer hydraulically (extruded section) regulated, designation No. 3, universal type, suitable for door shutters of 701 of 850 mm in width and of weight between 61 to 80 kg, fixed as in repairs, complete all as specified and directed.

Aluminium body door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 60 kg, fixed as in repairs, complete all as specified and directed.

Floor door stopper aluminum alloy and touge, anodised over all length of cover plate 140mm, with hard drawn steel spring, fixed as in repairs, complete all as specified and directed.

Stainless steel wire cloth, .36mm nominal dia of wire and average width ofaperture 1.40mm and fixed with stainless steel wire staples, fixed as in repairs, complete all as specified and directed.

Steel rolling shutters with 1mm lath thickness, without ball bearing, push pull or manual type complete, incl top cover, anchoring rod, hasp and staple incl painting the surfaces with two coats of synthetic enamel paint over one shop coat of primer, fixed as in repairs, complete all as specified and directed.

Taking down rolling shutter, hood cover and guide channels etc complete width of rolling shutter upto 3metre, incl complete servicing, greasing, oiling and strengthening of guide channels and refixing all arrangements in proper alignments for smooth functioning, complete all as specified and directed.

Mild steel plain sheet 0.63mm thick, cut to size , made to shape of hood cover of rolling shutters , fixed in position as in repairs incl painting two coats with snthetic enamel paint over a coat of red oxide primer, fixed as in repairs, complete all as specified and directed.

Taking down existing unserviceable tension spring of rolling shutter and provision of new tension spring of approved quality, fixed as in repairs, complete all as specified and directed.

Taking down existing unserviceable locking arrangement of rolling shutter and provision of new locking arrangement with mild steel safety lever locks 4 levers, complete all as specified and directed.

Ball bearing for rolling shutter, fixed as in repairs, complete all as specified and directed.

Collapsible steel gates, top hung, consisting of channels pickets, pivoted flat bars, top and bottom runners, brass handles etc erected in postion and securing runners with holdfasts and brackets including taking down collapsible steel gate of any description, complete all as specified and directed. Note : The rate quoted shall incl for provision of suitable size of bed blocks in PCC 1:2:4 type B1 for securing of runners hold fasts.

Repairs to existing Collapsible steel gates of any type and description incl oiling and greasing complete for smooth functioing, complete all as specified and directed. Note : The rate quoted shall including for replacing of old fittings/fixtures such as wheels, handles and locking system with new fittings/fixtures.

4.00 mm thick sheet glass ordinary quality and glazing with oil putting square nexc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size ,quality or description), from wooden/ steel frame glazed putty or fixed with beads, complete all as specified and directed.

4.00 mm thick figured glass, pin type , glazing with oil putty in square in each pane inluding hacking out old broken glass (any thickness, size ,quality or description), from wooden/ steel frame glazed putty or fixed with beads, complete all as specified and directed.

Supply only diamond glass oil white putty, complete all as specified and directed. (Make : Samhith Industries)

Supply only aluminium sheet of thickness 0.60mm & height 900mm, complete all as specified and directed.

Supply only brass NRV 15mm (Horizontal), complete all as specified and directed.

Supply only brass NRV 15mm (vertical), complete all as specified and directed.

100mm size brass mortice lock, vertical type, 4 levers, incl plates and two keys, incl cutting holes into existing pressed steel frames, fixed in repairs, complete all as specified and as directed.

Preparation of new wood or wood base surface of any description over 10cm width or girth and applying two coats of synthetic enameled paint over one coat of pink primer, complete all as specified and directed.

Preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, complete all as specified and directed.

Taking down existing aluminium door shutters area n exc 1.5 sqm each and carrying out necessary servicing incl greasing/oiling etc, for smooth functioning and taking down unserviceable hardwares and replacing with new hardwares and re-fixing the door shutters in position, complete all as specified and as directed. Notes : (a) Hardwares wherever required to be replaced shall be measured and paid seperately at supply only rates under respective items of this schedule.

Powder coating of any colour aluminium extruded standard sections, anodised (15 micron) fixed to existing framed doors, partiions etc., fixed as in repairs including taking down existing aluminium sections, complete all as specified and directed. Note : All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufactures catalouge for the corresponding aluminum sections/fittings.

Powder coating of any colour aluminium extruded standard clips, anodised (15 micron) fixed to existing panels of framed doors, partiions etc., fixed as in repairs including taking down existing aluminium clips all as specified and directed. Note : The clips shall be of section No : 19370 of JINDAL aluminum extrusions or equivalent section in makes as specified and directed.

Powder coating of any colour aluminium grills standard design, fixed in position including taking down existing unserviceable grills of any description and making good the disturbed surfaces, complete all as specified and as directed. Note: The weight of the grill shall not be less than 2.2 Kg/SqM

9mm thick prelaminated particle board interior grade prelaminated on one side with decorative choice lamination and with balancing white on the other side, fixed to aluminium frame work as in panel, etc., fixed as in repairs, complete all as specified and directed. Note : Clips wherever required shall be measured and paid seperately under respective items of this schedule.

5.5 mm thick sheet glass, ordinary quality, fixied with necessary glazing clips, in squares exceeding 0.5 SqM in each pane, fixed as in repairs, complete all as specified and as directed.

4 mm thick frosted glass panes, fixed with necessary glazing clips, in squares exceeding 0.5 SqM in each pane, fixed as in repairs, complete all as specified and directed.

5 mm thick tinted glass panes, fixied with necessary glazing clips, in squares exceeding 0.5 SqM in each pane, fixed as in repairs, complete all as specified and directed.

Supply only anodised extruded aluminium alloy butt hinges with galvanised mild steel hinge pin, 100mm size, complete all as specified and as directed.

Supply only double action floor spring, hydraulically regulated, made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass and other parts made of heavy duty mild steel, complete all as specified and as directed.

Sliding locks suitable for sliding window shutters, fixed as in repairs, complete all as specified and directed.

Supply only rubber beading suitable for fixing glass panes to aluminum door shutters, complete all as specified and directed.

Supply only neoprene beading suitable for fixing glass panes to aluminum door shutters, complete all as specified and directed.

Supply only pivot hinges suitable for aluminium door shutters, complete all as specified and directed.

Supply only pivot hinges suitable for stainless steel door shutters, complete all as specified and directed.

Aluminium alloy extruded handle, anodised, cast type 150mm size suitable for aluminum door/window shutters, fixed as in repairs, complete all as specified and directed.

Stainless steel tubes/sections , SS 304 grade, as in posts, railings, etc fixed in position including taking down existing unserviceable posts/railings, complete all as specified and directed.

Stainless steel handles, vertical member of the handle 25.5mm dia x 205mm long, suitable for stainless steel door shutters, fixed in repairs as per anufacturer instructions, complete all as specified and as directed. Note : Stainless steel handle shall be procured from M/s Stallion Comfort Systems or with equivalent specifiications from any other manufacturer.

Vision glass, fixed to existing stainless steel door shutters including taking down the existing broken glass and welded beading and refixing the beading and welding after fixing new glass, complete all as specified and directed.

Welding mild steel members of thickness n exc 6mm as in repairs, welds n exc 2.5cm in length, complete all as specified and directed.

Taking up and down steel tubing and down steel water tubing and connections including cleaning for re-fixing or removal 15 mm bore, complete all as specified and directed.( Cutting chases in wall/ floor for removal of concealed water tubing as necessary shall be measured and paid seperately)

All as per item No 81 but 20mm bore, complete all as specified and directed.

All as per item No 81 but 25mm bore, complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (wall, ceiling or floor) 15 mm dia GI tube obtained from SL item No 81 above, complete all as specified and directed.

All as per item No 84 above but for 20 mm bore obtained from Sl item No 82 above, complete all as specified and directed.

All as per item No 84 above but for 25 mm bore obtained from Sl item No 83 above, complete all as specified and directed.

Cutting existing steel tubing for addition or alteration(each cutting will be measured) 15mm bore, complete all as specified and directed.

All as per item No 87 but 20mm bore, complete all as specified and directed.

All as per item No 87 but 25mm bore, complete all as specified and directed.

Mild steel water tubes, 15 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Mild steel water tubes, 20 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Mild steel water tubes, 25 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Cutting chases for concealed water tubing and making good cutting not exceeding 10cm girth in brick walls, complete all as specified and as directed.

All as per item No 93 but stone or concrete block walls, complete all as specified and as directed.

Excavation in trenches n.exc 1.5m width and not exc 1.5 m in depth and getting out in hard/ dense soil, complete all as specified and directed.

Returning filling in, including spreding leveling, watering and wall ramming in layers n.exc 25 cm thick, complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exc 1.5 m above the starting point, complete all as specified and directed.

Bib taps, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule, 15mm bore, fixed as in repairs, complete all as specified and as directed.

All as per item No 98 above but chromium plated, fixed as in repairs, complete all as specified and directed .

All as per item No 98 above but fancy type chromium plated, fixed as in repairs, complete all as specified and directed .

All as per item No 98 above but long body of approved quality and make, fixed as in repairs, complete all as specified and directed .

Pillar taps cast copper alloy, with capstain head, chromium plated screwed down high pressure with or with out lettered hot or cold with long screw shanks and fly nuts screwed for iron pipe 15mm bore, fixed as in repairs, complete all as specified and directed .

Stop valves, cast copper alloys, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed of 15 mm bore, fixed as in repairs, complete all as specified and directed .

All as per item No 103 here-in-before but fancy type chromium plated, fixed as in repairs, complete all as specified and directed . Make Cat No. 513A 0f ESSCO or equivalent model in makes of JOHNSON/ESSESS/ARK

All as per item No 103 here-in-before but fancy type chromium plated with long shank and cup (concealed type), fixed as in repairs, complete all as specified and directed . Make Cat No. 514B 0f ESSCO or equivalent model in makes of JOHNSON/ESS-ESS/ARK

Gun metal globe or gate valve 15 mm bore with iron wheel head screwed both ends for iron pipe, fixed as in repairs, complete all as specified and directed .

Gun metal globe or gate valve 20 mm bore with iron wheel head screwed both ends for iron pipe, fixed as in repairs, complete all as specified and directed .

Gun metal globe or gate valve 25 mm bore with iron wheel head screwed both ends for iron pipe, fixed as in repairs, complete all as specified and directed .

20 mm bore ball brass valve high pressure with polyethylene float and fly nut complete screwed for iron pipe or brass ferrule, fixed as in repairs, complete all as specified and directed .

25 mm bore ball brass valve high pressure with polyethylene float and fly nut complete screwed for iron pipe or brass ferrule, fixed as in repairs, complete all as specified and directed .

32 mm bore waste fittings, brass chromium plated for glazed ware sinks basin etc with long screwed shanks and flynuts flanged and bedded in red lead cement and other ends fixed, fixed as in repairs, complete all as specified and directed .

40 mm bore waste fittings, brass chromium plated for glazed ware sinks basin etc with long screwed shanks and flynuts flanged and bedded in red lead cement and other ends fixed, fixed as in repairs, complete all as specified and directed .

Waste coupling for stainless steel sink 75mm size, fixed as in repairs, complete all as specified and directed .

Waste coupling for stainless steel sink 100mm size, fixed as in repairs, complete all as specified and directed .

Brass chromium plated shower rose with or without swivel joints 75mm size including fixing to steel pipe or union 15 mm bore including taking out the old unserviceable shower rose any type, complete all as specified and directed.

Shower arms CP brass 15mm, 23cm long, fixed as in repairs, complete all as specified and directed .

15mm PVC connection 45 cm long between ends with PTMT nut and washer, fixed as in repairs, complete all as specified and directed .

PVC flexible pipe(wastepipe) suitable for 32 mm waste coupling, fixed as in repairs, complete all as specified and directed .

PVC flexible pipe(wastepipe) suitable for 40 mm waste coupling, fixed as in repairs, complete all as specified and directed .

10 Ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, fixed as in repairs, complete all as specified and directed .

Flush pipe of polyethylene of low or high density or PVC 32mm dia for low level cistern, fixed as in repairs, complete all as specified and directed .

Syphon set for PVC flushing cistern, fixed as in repairs, complete all as specified and directed .

PVC/plastic handle for flushing cistern, fixed as in repairs, complete all as specified and directed .

Waste pipe (PVC) for urinal, fixed as in repairs, complete all as specified and directed .

Plastic water closet seat cover white colour closed pattern with flat botton and cover & MS chromium plated or aluminium hinges/device, fixed as in repairs, complete all as specified and directed .

All as per item No 125 here-in-before but coloured, fixed as in repairs, complete all as specified and directed .

Repairs to Bib taps any type including changing of spindal/rubber washer etc if required, complete all as specified and directed. (spindle will be measure separately and paid at supply rate only)

Repairs to Pillar taps any type including changing of spindal/rubber washer etc if required, complete all as specified and directed. (spindle will be measure separately and paid at supply rate only)

Repairs to Stop cock any type including changing of spindal/rubber washer etc if required, complete all as specified and directed. (spindle will be measure separately and paid at supply rate only)

Repairs to Concealed stop cock any type including changing of spindal/rubber washer etc if required, complete all as specified and directed. (spindle will be measure separately and paid at supply rate only)

Supply only spindle brass suitable for bib taps, complete all as specified and directed.

Supply only spindle brass suitable for Pillar taps, complete all as specified and directed.

Supply only spindle brass suitable for stop cock, complete all as specified and directed.

Supply only spindle brass suitable for Concealed stop cock, complete all as specified and directed.

Elbow operated bib tap cast copper alloy chromium plated screwed for iron pipe, 15mm bore, fixed as in repairs, complete all as specified and directed. Make Cat No. 320009 0f ARK or equivalent model in JAQUAR

Elbow operated pillar tap cast copper alloy chromium plated screwed for iron pipe, 15mm bore, fixed as in repairs, complete all as specified and directed. Make Cat No.2320009 0f ARK or equivalent model in JAQUAR

500 ltrs capacity potential moulded polyethylene water storage tank (cylindrical or vertical) hoisted and fixed in position including dismantling existing unserviceable any type, any capacity, water tank, complete all as specified and directed.

All as per item No 137 here-in-before but 1000 ltrs capacity, complete all as specified and directed.

Wash basin vitreous china white flat back of size 550x400mm including brass chromium plated pillar tap 15mm size, cast copper alloy with capstan head, brass chromium plated waste fittings, PVC waste pipe of suitable size, plug and porcelin stopper, CI brackets, cutting for and pinning in ends of brackets or erecting stand including taking down the old unserviceable one, complete all as specified and directed.

Jet set of WC (L) type incl one GI Tee 15mm and one Angle Cock CP brass 15 mm, fixed as in repairs, complete all as specified and directed.

Wash basin hot and cold mixing valve swan neck type for 15mm bore pipe foam flow type, fixed as in repairs, complete all as specified and directed.

Stop valve of PTMT any colour screwed for iron pipe 15mm, fixed as in repairs, comolete all as specified and directed. (Make 'PRAYAG' or equivalent)

PVC connection PTMT 600mm long between ends with PTMT nuts and washers, fixed as in repairs, complete all as specified and directed.

Low density polyethylene pipes fixed to walls, ceilings or in floors etc. 40 mm bore including all necessary fittings, complete all as specified and directed.

Low density polyethylene pipes fixed to walls, ceiling or in floors etc.50 mm bore including all necessary fittings, complete all as specified and directed.

Stainless steel soap dish of approved make, fixed as in repairs, complete all as specified and as directed. Make: Cat No. 18092 of ARK or equilvalent make in JAQUAR

Stainless steel toilet paper holder of approved make, fixed as in repairs, complete all as specified and as directed. Make: Cat No. 18051 of ARK orequilvalent make in JAQUAR

Brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm between flanges, fixed as in repairs, complete all as specified and directed.

Brass chromium plated towel ring of approved make 200 mm dia, fixed as in repairs, complete all as specified and directed. Make: Cat No. 18032 of ARK orequilvalent make in JAQUAR

Sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410mmx330mmx160mm, fixed as in repairs, complete all as specified and directed.

Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410mmx330mmx160mm, fixed as in repairs, complete all as specified and as directed.

PVC float valve for use in PVC flushing cistern suitable for 15 mm bore inlet, fixed as in repairs, complete all as specified and as directed.

Taking down existing vitreous china wash basins of any description and size alongwith brackets and refixing the same wash basin in new or old position with and including new rag bolts of suitable size and making good the disturbed surfaces to match with the adjacent surfaces, complete all as specified and directed.

Polyethelene -Aluminium -Polyethylene (PE-AL-PE) composite pressure water tubing , 16mm outer dia fixed to walls and ceilings or laid in floors with necessary clamps incl provision of crip type internal sealing plastic-metal composite fittings such as elbows, tees, bends, reducers etc., fixed as in repairs, complete all as specified and directed.

All as per item No : 154 above but 20mm outer dia, fixed as in repairs, complete all as specified and directed.

20mm CPVC Ball valve, fixed as in repairs, complete all as specified and directed.

25mm CPVC Ball valve, fixed as in repairs, complete all as specified and adirected.

20mm CPVC Pipes incl all fitting such as elbows, tees, bends, reducers etc and fixed to walls, ceilings or laid in floors, fixed as in repairs, complete all as specified and directed.

25mm CPVC Pipes incl all fitting such as elbows, tees, bends, reducers etc and fixed to walls, ceilings or laid in floors, fixed as in repairs, complete all as specified and directed.

Concussive push button taps of cast copper alloy, screwed for iron pipe 15 mm bore, fixed as in repairs, complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness including cover fillets etc., complete all as specified and directed.

8 to 9 mm thick Pre painted gypsum building boards of size 595 x 595mm PVC laminated at back side of board insulation & acoustic purpose flat in ceiling fixed or laid / including powder coated GI snap grid of size 605mm x 605mm frame work using 36.50 x 23.50 x 1.5mm main Tee, 23.50 x 23.50 x 1.5mm cross Tee and 25x25x1.5mm angles for false ceiling with screws fixed to false ceiling including hangers 4 mm dia G.I (upto 1.5m length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed. NOTE: (The rate inclusive of scaffolding and necessary arrangements)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Non skid ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n exc 0.38 sqm , in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match, complete all as specified and directed.

Non skid ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm , in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match, complete all as specified and directed.

Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes, complete all as specified and directed.

Coloured Glazed ceramic tiles 300 x 200 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match, complete all as specified and directed.

Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting.

Granite (of any type) stone slab 16 to 20 mm thick (table rubbed and polished), in skirting, Kitchen platform /dado etc laid over cement screed bed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including etc., complete all as specified and directed.

Virified light shade coloured tiles of size 600 x 600 x 7 to 8mm thick as in floor, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thick above or below ground level and removal of debris to outside of MD area, complete all as specified and directed.

Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded granite stone aggregate) in plinth protections and similar works inculding necessary form works, complete all as specified and directed.

40 mm thick PCC (1:2:4) using 40mm graded aggregate in floorings finished cement concrete surface even and smooth with out using extra cement, complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc and removal of debris to outside of MD area, complete all as specified.

Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6, complete all as specified and directed.

Pre-cast cement concrete block in PCC 1:3:6 type C1(20mm graded aggregate) masonry with solid blocks, exc. 10cm in width and setting in mortar 1:6, complete all as specified and as directed

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed.

Rendering 15 mm thick on external fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished faiar and even without using extra cement incl; mixing of water proofing compound, complete all as specified and directed.

Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished smooth and even without using extra cement, cpmplete all as specified and directed.

Rendering 5 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished fair and even without using extra cement, complete all as specified and directed.

Preparing newly plastered surfaces of walls and applying three coats of white wash, complete all as specified and directed.

Preparing newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

35 mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter (Two panel) with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers supplied and fitted to chowkats, complete all as specified and directed.

30 mm thick Second class hard wood Gauzed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc, size of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats, complete all as specified and directed.

35 mm thick Second class hard wood Gauzed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc, size of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats, complete all as specified and directed.

30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated, complete all as specified and as directed.

Preparing surfaces of wood and wood based materials, steel and iron work new or old, of any description and girth not otherwise described, and treated with tar or coal tar black paint, complete all as specified and as directed.

4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane, complete all as specified and directed.

Alluminium alloy wire cloth, o.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, complete all as specified and directed.

Alluminium alloy wire cloth, o.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, fixed as in repairs, complete all as specified and directed.

100mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed, complete all as specified and directed.

75mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed, complete all as specified and directed.

150 mm long Extruded Aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

100 mm long Extruded Aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

100 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, complete all as specified and directed.

Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) in hold fasts and similar works, complete all as specified and directed.

Taking down and re-fixing the same Alumuinium window/ ventilator shutters, carrying out repairs as required, removing the existing beading and fixing new rubber beading of suitable size with adhesive, as required, complete all as required and directed.

Taking down re-fixing the same existing Aluminium door carrying out repairs as required, removing the existing beading and fixing new rubber beading of suitable size with adhesive, overhauling of floor springs including greasing and oiling as required for each shutter area n. exc 4sqm, complete all as specified and directed. Note: Floor spring & Pivot will be paid separately if replaced with new.

Supply only double action floor springs aluminium body hydraulically regulated made up of minium 1.2 mm thick aluminium alloy sheet, foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of MA heavy duty universal type conforming to relevant IS, complete all as specified and directed.

Double legged floor door stopper aluminium alloy with rubber etc., fixed as in repairs, complete all as specified and as directed.

Supply only pivot hinges suitable for aluminium door shutters, complete all as specified and directed.

Pivot hinges suitable for stainless steel door shutters, fixed in repairs, complete all as specified and directed.

110mm pvc traps 'P' or 'S' , fixed as in repairs, complete all as specified and directed.

Vitreous Ware wash down water closet (Pedestal), white (ETWC) with seat cover(fancy type ETWC connected with flush tank), fixed as in repairs, complete all as specified and directed.

Vitreous china urinal, bowl type flat back of size 465 x 355 x 265 mm white (minimum), with grating, fulsh pipe and union for discharge pipe, fixed as in repairs, complete all as specifed and directed.

Vitreous china urinal partion of matching size to existing urinal, fixed as in repairs, complete all as specifed and directed.

Removing plants/herbs grown on walls/junctions with roots using herbicide chemical,rendering and making good of existing brick/ concrete surfaces, complete all as specified and directed.

Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union, fixed as in repairs, complete all as specifed and directed.

20 mm curtain rods of aluminium annodised powder coated fixed in existing brackets, fixed as in repairs, complete all as specifed and directed.

Curtain rods brackets aluminium annodised powder coated, fixed as in repairs, complete all as specifed and directed.

4 levers Brass Mortice lock, vertical type,of Size 75 mm, fixed as in repairs, complete all as specificed in SSR Part-I and directed.

Supply only intergral water proofing compound, complete all as specified and directed.

3.00 mm thick sheet glass ordinary quality and glazing with oil putting square nexc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size ,quality or description), from wooden/ steel frame glazed putty or fixed with beads up to 4 storeies, complete all as specified and directed.

Easing of door / window shutters of any size/ any number of panels for easy closing/ opening / tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding door bolts etc., complete all as specified and directed.

Aluminium handles cast type anodized 125mm size, fixed as in repairs, complete all as specified and directed.

Welding in repairs not exceeding 6mm thick metal, complete all as specified and directed.

Chromium plated brass 15 mm dia health faucet with 8 mm dia, 1.2 m long flexible tube with wall hook complete necessary fixing arrangements etc., fixed as in repairs, complete all as specified and directed. Make: Jaquar/Cera/Ess Ess or equivalent as approved.

15mm dia. Bib tap standard of PTMT any colour high pressure screwed down for iron pipe(Min weight 15mm-90gms) ISI marked, fixed as in repairs, complete all as specified and directed. Make : Prayag/polytuf

15 mm dia. Pillar tap standard of PTMT any colour high pressure screwed down for iron pipe(Min weight 15mm-120 gms) ISI marked, fixed as in repairs, complete all as specified and directed. Make : Prayag/polytuf

Bathroom cabinet Mirror of moulded PVC of size 431.80mm x 355.60mm including fixing to wall, fixed as in repairs, complete all as specified and directed. (Make : Prayag or Equivalent)

VIKAS CONSTRUCTIONS

Kavitha Constructions