Providing fitting and up gradation of electro mechanical equipment of Irrigation Tubewell station Bari Kamila-A in District Samba.

Providing, Installation, testing & commissioning of submersible pump set (KSB / Kirloskar or equivalent make) at Tube well Bari Kamila-A having capacity 8,000 GPH x 60m head coupled with 3 phase submersible motor of suitable capacity along with motor protection guard (Mug-30 HP) of reputed make and along with existing 100mm dia flanged column pipes, and other allied materials/ equipments required during lowering of submersible pump set along with 10 sq. mm sub cable. The job includes extraction of old defunct pumpset and pipes by using chain block / tripod stand and manual labour along with tools and tackles. The job includes shifting of column pipes to workshop, Cutting of all rusted worn out flanges from column pipes and removal of eccentricity of pipes if any. Providing / fitting of new flanges in place of rusted and deformed old flanges .The flanges should have a cut/slot for sub. Cable. Shifting of flanged column pipes to Tubewell. Fabrication, providing and fitting of 01 no U shaped tie rod/clamp of suitable size as per pump size made out of MS Flat to be fitted with the submersible pump with the help of heavy duty nuts and bolts welded on on both sides of the clamp. Job also includes fabrication of 01 no graded expander/reducer for nipple of required size threaded at one end and flanged at other end. Fitting of reducer/expander with column pipe at one end with flanged joint and with the discharge outlet of the submersible pump at other end. Lowering of the submersible pumpset 8,000 GPH x 60 m head by way of hoisting heavy duty chain pulley block of 5 ton capacity along with flanged column pipes as per the requirement one by one after tightening of each new nuts and bolts of the flanged joints to ensure leak proof connections. Providing and fitting of 10sq mm submersible cable 90 mtrs with proper insulation and thimbling. Making of 30 HP Mug starter and all the incoming and outgoing electrical connections. The job includes Providing & fitting of New Nuts and Bolts, flanges/ gaskets etc. The job also includes cost of material & labour charges, transportation, tool and tackles required for the execution of complete job. Recapitalization of 63 KVA Voltage Stabilizer installed at Tubewell by way of rewinding of all coils with superior quality copper wire and insulation material. Providing/Fitting of new rotary switches 3nos, voltmeter 2 no (one for incoming and one for outgoing), Ampere metre, selector switch, RYB phase indicators and replacement of its internal wiring. Job also includes cleaning of oil chamber to remove dust and other settled particulars. Repair to oil chamber wherever. Filling of fresh T- Oil in the oil chamber upto desired required level. Reassembling all the parts and connecting it with power supply to test the stabilizer on no load and full load at site.