For Replacement of damage ABC with New ABC at Akbar Nagar Bhuiyandevi Sector B Chandralok colony Aliganj and construction of 400 KVA New Substation in Darshanganj increasing of transformer 400 KVA to 630 KVA near Munna Sabhasad Lucknow against Busine

Amount

Safe Loading, carriage & unloading of following material from Central store and JE store to work site.

ST Pole 9/11 Mtr long

11/0.4KV 630 KVA T/F

11/0.4KV 400 KVA T/F

LT Cable 3.5x240/400/1x400 sqmm

AB Conductor (3x120+1x95+1x16) sqmm

LT Distribution Box.

Stay set complete

Fabrication erection of substation type double pole on ST pole 9/11Mtr along with fixing of necessary clamp, accessories required of MS channel on top dropper with arrangement of fixing of 3 Nos pin insulator as per RESPO specification & direction of E/I.

Errection of 9/11 mtr. ST pole by digging pit binding of Aerial Bunched Conductor fixing of necessary clamps alongwith grouting & Plinthing of pole. All material shall be supplied by the contractor and ST pole provided by the department.

Fabrication and fixing of DO Fuse Set.

Fabrication and fixing of 11 TPMO Set.

Pipe type earthing with 20 mtr. deep boring and providing Jindal make pipe "B" class 1" dia and GI strip 25x5 6mtr long attached with clamps and GI pipe.

Construction of T/F plinth of size 2x2x1.2 mtr. With Ist class bricks and masonary work in the ratio 1:4 cement & sand coarse ,filling the structure completely as per norms with RCC top 1:2:2 cement sand coarse stone grit with ms bar and MS channel for resting T/F all material shall be supplied by Contractor.

Construction of Metalic type Distribution Pillar box with first class brick ballast cement, coarse sand, local sand, brick ballast and MS Round bar of 10 mm dia including supply and mounting of 04 nos. Straight MS Angle 50x50x6x750 mm-3 nos., Henely type tailless fuse units 500 Amps. 650 Volts one no. for incoming and other for outgoing, Copper bus bar 4 nos. 1000x50x6 mm with locking arrangement made of 18 SWG BP Sheet (All the material will be arranged by the contractor)

Rectangular wiremess pel fencing of 11/0.4 KV S/S shall be made as per site requirement not exceeding 3 meter height fabrication with 45x45x5 mm angle the frame should also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support the wiremesh. Rectangular welded type wire mess of size 50x25mm made of 12 S.W.G. wiremesh shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wiremesh welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I. The vertical angles shall be grouted 1/6 of its length in ground with 1:2:2 ratio of cement, coarse sand & concrete provision of gate for entry should be provided with pad lock.

Erection of AB Conductor 3x120+1x95+1x16 sqmm on existing/ newly erected pole.Only ABC shall be supplied by the department.

Laying of LT Cable 3.5x400 sqmm with suitable size of Al lug. All material provided by department. Except Alu. Lugs

Supply and fixing of clamps.

(a) Dead end clamps

(c) Suspension clamps

(d) Shackle Insulator.

(e) LT Clamp for AB conductor

(f) Shackle strip.

Grouting of pole with the help of Cement, Course sand and brick ballast.

Erection of LT Distribution box on pole with the help of pole clamp nut and bolts

Fabrication and fixing of Henlay type tailless fuse unit 500 AMP 650 volts.

Fabrication and fixing of coper bus bar of size 50x6x1000 mm.

Grouting & Nuzzling of stay set complete and fixing of necessary clamps, complete Stay set and other accessories. Only stay set shall be supplied by the department & nut bolts shall be provided by the contractor.

Installation & commissioning of 11/0.4 KV 400 KVA T/F including its connection from 11 KV line and LT line mounting of copper L-Piece providing and fixing of Al crimping Lugs ,all material provide by department except nut bolt and copper L-Piece.(All the material except transformer will be arranged by the contractor)

Installation & commissioning of 11/0.4 KV 630 KVA T/F including its connection from 11 KV line and LT line mounting of copper L-Piece providing and fixing of Al crimping Lugs ,all material provide by department except nut bolt and copper L-Piece.(All the material except transformer will be arranged by the contractor)

Dismantling of existing 400 KVA T/F by Opening of all the HT/LT Connection and its safe carriage upto JE Dump store /ESC Daliganj.

Dismantling of existing damage/Jurjur AB conductor by Opening of all the Connection, its rolling and safe carriage upto JE Dump store /ESC Daliganj.

Prepare proper space for construction of plinth.

Painting of ST pole 9/11 Mtr. With Alu.Enamel paint with two coat.

M/S SHAIL ELECTRICALS

M/S AARADHYA AND ADHYATM ASSOCIATES

DEEPAK ENGINEERING