8594/E8 COMPREHENSIVE BR REPAIRS AND PERIODICAL SERVICES TO INHS DHANVANTARI UNDER AGE BR -I OF GE MINNIEBAY SRIVIJAYA PURAM

Amount

Dismantling of tiles of any description or thickness in floor, hearth or wall including cement mortar bedding, removing debries off the premises complete all as specified and as directed by Engineer in charge

M&L for double charged vitrified tiles (dark shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed by Engineer in charge

M&L for ceramic coloured tiles in vertical surface (dado/skirting) to match the shade and size of floor tiles laid over and including 10mm thick back coat in CM (1:4),complete all as specified and as directed by Engineer in charge

M&L for glazed ceramic tiles 350 x 250x 7mm / 450x300x 7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing in cement mortar (1:3) complete all as specified and as directed by Engineer in charge

M&L for coloured non-skid ceramic tiles 7 to 8 mm thick exc. 0.06 sqm but n.exc 0.11sqm area of each tiles in floor/ steps etc set and jointed in neat cement slurry and pointed in coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed by Engineer in charge

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed by Engineer in charge

M & L for 25 mm thick, PCC 1:2:4, Type B-0, using 12.5mm graded aggregate as in Sub base for flooring/levelling coarse, sunken floor etc complete all as specified and as directed by Engineer in charge

Demolition of stone slabs and tiles of any description or thicness in floors laid bedded pointed in any cement mortor in any position not otherwise specifically provided for complete all as specified and as directed by Engineer in charge

M&L 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win?dow-cills, cooking plat?forms and like in cement mortar (1:4) including point?ing in white cement (1:2) us?ing marble dust with admix?ture of pigment to match with shade of granite complete all as specified and as directed by Engineer in charge

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed by Engineer in charge

Taking down cement plaster on brick or stone wall and racking out joints hacking for key sucrubing down with water etc complete all as specified and as directed by Engineer in charge

M & L for rendering 15 mm thick in cement mortar 1:4 on concrete or brick masonry surfaces including mixing water proofing compound as per manufacurers instructions and finishing the top surface even and fair without using extra cement complete all as specified and as directed by Engineer in charge Note: Water proofing compound will be measured and paid separately.

Supply only water proofing compound ISI marked complete all as specified and as directed by Engineer in charge

M & L for rendering to concrete or block masonry surfaces or surfaces other than fair faces of brick surfaces, 10mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer in charge

M&L rendering 5mm thick in CM (1:3) on ceiling surfaces finished even & smooth without using extra cement complete all as specified and as directed by Engineer in charge

M&L for applying two coats of plastic emulsion paint over a coat of primer on newly plastered surface of wall including preparation of surface, complete all as specified and as directed by Engineer in charge Make: Asian Paint Apcolite Advanced Premium Emulsion paint or equivalent as approved by GE

M&L for Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed by Engineer in charge

M&L for applying two coats of plastic emulsion paint over a coat of primer on newly plastered surface of ceiling including preparation of surface, complete all as specified and as directed by Engineer in charge Make: Asian Paint Apcolite Advanced Premium Emulsion paint or equivalent as approved by GE

M & L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint of WHITE colour with silicon additives coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm over new surfaces complete all as specified and as directed by Engineer-in-charge. Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+ Super Luxury Emulsion) Note: Rate inclusive of scaffolding at any height.

M & L for complete removal of existing treatment and applying two coats of plastic emulsion paint over a coat of primer on wall surfaces complete all as specified and as directed by Engineer in charge Make: Asian Paint Apcolite Advanced Premium Emulsion paint or equivalent as approved by GE

M & L for complete removal of existing treatment and applying two coats of plastic emulsion paint over a coat of primer on ceiling surfaces complete all as specified and as directed by Engineer in charge Make: Asian Paint Apcolite Advanced Premium Emulsion paint or equivalent as approved by GE

M & L for preparation of old steel surfaces exc 10cm width and girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer in charge

M & L for preparation of old wooden surfaces exc 10cm width and girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer in charge

M & L for preparation of old surfaces and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint of WHITE COLOUR with silicon additives coat applied @ 1.67 ltr/10 sqm over complete all as specified and as directed by Engineer-in-charge. Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total). Shalimar Paints (Weatherpro+ Super Luxury Emulsion). Note: Rate inclusive of scaffolding at any height.

M & L for preparation of old surfaces and applying one coat of 100% Premium acrylic emulsion paint (company depot tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint with silicon additives coat applied @ 1.67 ltr/10 sqm over complete all as specified and as directed by Engineer-in-charge. Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total). Shalimar Paints (Weatherpro+ Super Luxury Emulsion). Note: Rate inclusive of scaffolding at any height.

M&L for complete removal of existing treatment and Preparation of plastered wall surfaces using mechanical means and removing all fungus, black stains, algae etc and applying Two coals of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of WHITE colour with silicon additives @ 1,43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and as directed by Engineer-in-charge. Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total), Shalimar Paints (Westherpro+ Super Luxury Emulsion)Note: Rate inclusive of scaffolding at any height.

M&L for complete removal of existing treatment and Preparation of plastered wall surfaces using mechanical means and removing all fungus, black stains, algae etc and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/itre and UV resistance as per IS 15489:2004, Alkali & fungel resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including piming coat of exterior primer applied @ 0.90 litrel 10 sqm over old surfaces complete all as specified and as directed by Engineer-in-charge. Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+ Super Luxury Emulsion) Note: Rate inclusive of scaffolding at any height.

Taking down Chowkats or frame with shutters [without taking off shutter from the frame] not exceeding 1.5 Sq.m each and removing to store complete all as specified and as directed by Engineer in charge

Taking down Chowkats or frame with shutters [without taking off shutter from the frame] exceeding 1.5 Sq.m but not exceeding 4.00 Sq.m each and removing to store complete all as specified and as directed by Engineer in charge

Refixing Shutters of any description in same opening exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each complete all as specified and as directed by Engineer in charge

Resecuring (or) Easing and Adjusting without taking down shutters of any description and any size complete all as specified and as directed by Engineer in charge

M&L for providing and fixing factory made uPVC white colour Sliding window Three track area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Notes: (i)The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.

S&F silicon sealant along the joints of UPVC window complete all as specified and as directed by Engineer in charge

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

S&F Factory made single extruded 18/19 mm thick WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws etc., complete all as specified and as directed by Engineer in charge

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet edges will be painted to match with printed sheet reinforced with MS square tube in opening as per specification and drawing complete all as specified and as directed by Engineer in charge

S&F Factory made solid panel PVC Door shutter 30mm thick (Style) consisting of frame made out MS frame shall be covered with heat moulded wood grain printed PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90ͦ C ) used instead of exposed portion of PVC sheet beading. having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail, & bottom rail; Panneling of colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement at site complete all as specified and as directed by Engineer in charge

S & F 150 mm long Aluminium anodised barrel tower bolts of extruded sections complete all as specified and as directed by Engineer in charge

S & F in repair 150 mm long Aluminium anodised barrel tower bolts of extruded sections complete all as specified and as directed by Engineer in charge

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extended sections or cast aluminium alloy complete all as specified and as directed by Engineer in charge

S&F in repair 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections complete all as specified and as directed by Engineer in charge

S & F 150mm long Aluminium anodised Handle, of extruded section fabricated type complete all as specified and as directed by Engineer in charge

S & F in repairs 150mm long Aluminium anodised Handle, of extruded section Fabricated type complete all as specified and as directed by Engineer in charge

S&F Stainless steel butt hinges 100mm size medium weight complete all as specified and as directed by Engineer in charge

S&F in repair Stainless steel butt hinges 100mm size medium weight complete all as specified and as directed by Engineer in charge

S & F Floor Door Stopper of size 140mm overall length of cover plate of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and as directed by Engineer in charge

S & F in repair Floor Door Stopper of size 140mm overall length of cover plate of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and as directed by Engineer in charge

Supply only 4mm thick, Figured glass, pinhead type in squares n exc 0.5 sqm each pane complete all as specified and as directed by Engineer in charge

Supply and fixing in repair Powder coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction complete all as specified and as directed by Engineer in charge

Supply only Stainless steel wire cloth 0.36 mm in nominal dia of wire average width of aperture 1.40 mm and fixed with tinned tacks of stainless steel wire staples to steel shutters or fixed with wooden beads to wooden joinery, complete all as specified and as directed by Engineer in charge

S&F in repair 4.8 mm thick sheet glass ordinary quality in aluminum joinery in squares of area n.exc 0.50 sqm in each pane including necessary adjustements, dismantling and re-securing complete all as specified and as directed by Engineer in charge

S&F in replacement of stainless steel wire cloth 0.36 mm in nominal dia of wire average width of aperture 1.40 mm and fixed with tinned tacks of stainless steel wire staples to steel shutters or fixed with wooden beads to wooden joinery, complete all as specified and as directed by Engineer in charge

S&F 12mm thick Prelaminated particle board, interior grade, prelaminated on both sides with decorative choice lamination fixed as in panels of Aluminium door shutters, partition etc complete all as specified and as directed by Engineer in charge

S & F Anodized aluminum door seals of 32mm (overall size) with standard 1mm thick aluminum sections and bottom brush and provision of counter sunk holes for screws etc complete all as specified and as directed by Engineer in charge

S & F in repair 18 to 20mm thick prelaminated MDF panels of interior grade type-II of approved shade for kitchen cabin/wardrobe/wall panelling fixing with necessary fitting like keku fitting,spring clip,hanger plate,modular hinge/clip,push fix or stud fitting as per manufacturers instructions complete all as specified and as directed by Engineer in charge

M & L 100mm Extruded brass handles, fabricated type polished complete all as specified and as directed by Engineer in charge

S & F 75mm Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed complete all as specified and as directed by Engineer in charge

S & F Ball catches/Magnet catcher with 8mm dia steelball, and brass body and striking plate including letting in and fixed with screws complete all as specified and as directed by Engineer in charge

S&F mild steel works as in small articles such as hold fast,clamps, hooks, plain angle cleats etc bent to shape making holes etc complete all as specified and as directed by Engineer in charge

S & F Continuous (piano) hinges width of flap 40 mm (when open) ,stainless steel, bright finish or electro galvanised complete all as specified and as directed by Engineer in charge

S&F in repair stainless steel curtain rod 25mm dia steel pipe cutting into length as required at site with and incl SS end caps/lobs and SS wall mounting brackets etc., complete all as specified and as directed by Engineer in charge

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed by Engineer in charge

S&FMS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed by Engineer in charge

M& L second class hard wood Plain fillets exc 13 sqcm and nexc 25 sqcm . square,rectangular or triangular in section, clean sawn, secured with nails or bradsbut bullnosed,splayed, chamfered or rounded on one edge or face complete all as specified and as directed by Engineer in charge

S&F in repair stainless steel sink with drainage board made out of 1.00 mm thick sheet with plug, washers, Ms angle cantilever brackets for suitable size and connecting union to pipe of overall size 1140 mm x 500 mm and bowl size 510mm x 400 mm x 190 mm complete all as specified and as directed by Engineer in charge

S&F in repair Wash basins including brackets, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed by Engineer in charge

S & F in repair 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by Engineer in charge

S & F in repair 32 mm (Dia of discharge pipe) Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and as directed by Engineer in charge

S&F in repair PVC flexible waste pipe of 32 mm for wash hand basin and kitchen sink complete all as specified and as directed by Engineer in charge

S&F in repairs vitreous China squatting pan, `Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed by Engineer in charge

S&F in repairs Towel Rail CP Brass Make Prayag Cat.No BA 10 S or equivalent complete all as specified and as directed by Engineer in charge

S&F in repairs Towel Rack 600mm Long with Lower Hangers Superior finished CP Brass complete all as specified and as directed by Engineer in charge

S&F in repair Angular stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for pipe or union fixed for 15mm bore etc., complete all as specified and as directed by Engineer in charge Make: Jaquar, Prayag,Parry ware (super fine), Prima, Pearl

Fixing only in repairs angular cock including cleaning, removing of air block/washer etc of any type and size complete all as specified and as directed by Engineer in charge

S&F in repairs concealed stop cock with fitting sleeves,operating lever &adjustable wall flange with seal(comatible with ALD-089)valves cast copper alloy chromium plated with long shank and cup (concealed type) fancy type screwed down high pressure screwed both ends for pipe complete all as specified and as directed by Engineer in charge Make: Jaquar, Prayag,Parry ware (super fine), Prima, Pearl

Fixing only in repairs stop cock including cleaning, removing of air block/washer etc of any type and size complete all as specified and as directed by Engineer in charge

S&F in repair CP Toilet paper holder fancy type high quality complete all as specified and as directed by Engineer in charge Make: Jaquar, Prayag,Parry ware (super fine), Prima, Pearl

S&F in repairs brass chromium plated shower rose with or without swivel joint 100mm size complete all as specified and as directed by Engineer in charge Make: Jaquar, Prayag,Parry ware (super fine), Prima, Pearl

S & F in repair quarter turn Bib Taps with flange, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type for iron pipe and fixed etc complete all as specified and as directed by Engineer in charge Make: Jaquar, Prayag,Parry ware (super fine), Prima, Pearl

Fixing only in repairs bib cock including cleaning, removing of air block/washer etc of any type and size complete all as specified and as directed by Engineer in charge

S & F in repair quarter turn Two way Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type for iron pipe and fixed etc complete all as specified and as directed by Engineer in charge Make: Jaquar, Prayag,Parry ware (super fine), Prima, Pearl

S&F in repairs brass chromium plated Hand shower (Health Faucet)(ABS Body) with 1 Meter long Easy Flex Tube in Chrome Finish& wall Hook complete all as specified and as directed by Engineer in charge Make: Jaquar, Prayag,Parry ware (super fine), Prima, Pearl

S & F in repair Soap Dish,brass chromium plated of approximate size 160 x 160 x 90 mm with screws complete all as specified and as directed by Engineer in charge Make: Jaquar, Prayag,Parry ware (super fine), Prima, Pearl

S & F in repair PVC Body Cabinet Box Mirror of size 350mm X 450mm X 100mm in PTMT alloy of approved design and pattern complete all as specified and as directed by Engineer in charge

BLANK

S & F in repairs quarter turn Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed by Engineer in charge Make: Jaquar, Prayag,Parry ware (super fine), Prima, Pearl

Fixing only in repairs pillar taps including cleaning, removing of air block/washer etc of any type and size complete all as specified and as directed by Engineer in charge

S&F in repairs Vitreous China wash down watercloset pan (pedestal pattern), white including Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer in charge

S & F in repairs 10 Liters capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe of Make Slimline or Cera or equivalent make complete all as specified and as directed by Engineer in charge

S&F in repairs PVC flexible connection with PTMT nuts, of 15mm dia and 600mm long with brass unions and rubber washers on either side, for connecting water supply line to WHB, flushtank ,Geyser etc, complete all as specified and as directed by Engineer in charge

S&F in replacement of 1st quality vitreous China white urinal flat back (Large size) with and incl CP waste coupling of suitable size, cast copper alloy CP spreader union with discharge pipe duly connected to auto closing angle cock, complete with necessary fittings, complete all as specified and as directed by Engineer in charge

Dismantling water tank of capacity exc 500 ltr but not exc 1000 ltr complete all as specified and as directed by Engineer in charge

S&F of rotational moulded polyethylene cylindrical vertical with closed top threaded cover water storage tank triple layered WHITE COLOUR 1000 Ltr capacity, UV protected, Anti-bactrial coating with connecting nipple, hoisted and fixed in position on new or existing foundation, complete all as specified and as directed by Engineer in charge Make : Vectus(Smart) / Prince(Store Fit) / Oxygen(Shine)

S&F of rotational moulded polyethylene cylindrical vertical with closed top threaded cover water storage tank triple layered WHITE COLOUR 500 Ltr capacity, UV protected, Anti-bactrial coating with connecting nipple, hoisted and fixed in position on new or existing foundation, complete all as specified and as directed by Engineer in charge Make : Vectus(Smart) / Prince(Store Fit) / Oxygen(Shine)

Disconnecting existing tanks of capacity exc 500 ltr but not exc 1000 ltr , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)

Taking up or down 20 mm bore tubing and connections and removing off the site complete all as specified and as directed by Engineer in charge

Taking up or down 25 mm bore tubing and connections and removing off the site complete all as specified and as directed by Engineer in charge

Supply and laying of CPVC pipes 20 mm dia outer boreSDR 11 &plain CPVC SDR 11with all special fittings on walls /ceilings or laying in floors complete all as specified and as directed by Engineer in charge

Supply and laying of CPVC pipes 25mm dia outer boreSDR 11 &plain CPVC SDR 11 with all special fittings on walls /ceilings or laying in floors complete all as specified and as directed by Engineer in charge

Supply and fixing 20 mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA) complete all as specified and as directed by Engineer in charge

Supply and fixing 25 mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA) complete all as specified and as directed by Engineer in charge

Supply and fixing 20mm outer dia CPVC pipes brass Elbow (3/4 X1/2) complete all as specified and as directed by Engineer in charge

Supply and fixing 20mm outer dia CPVC female brass adaptor (FTA/FBTA) complete all as specified and as directed by Engineer in charge

Supply and fixing 25 mm outer dia CPVC female brass adaptor (FTA/FBTA) complete all as specified and as directed by Engineer in charge

Supply and fixing 20 mm outer dia CPVC Brass Tee complete all as specified and as directed by Engineer in charge

Fixing only in repairs by replacing minor parts like flushing knob, float, screws etc of PVC flush tank low level cistern, 10 ltr capacity, including connecting to existing water supplyline and water closet pan complete all as specified and as directed by Engineer in charge

S&F in repair 15mm dia wall mixer cast copper alloy with capstan heads, chromium plated screwed down high, pressure with provn of overhead shower on upper side connecting legs and wall flanges high quality fancy type complete all as specified and as directed by Engineer in charge

S&F in repair Ball brass valve high pressure of polyethylene float and fly nut complete screwed for iron pipe and fixed, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule etc and fixed of 25mm bore complete all as specified and as directed by Engineer in charge

Demolition of precast concrete work/ block walling built in cement mortar complete all as specified and as directed by Engineer in charge

Material and labour for PCC solid block masonry (1:3:6) (using 20mm graded stone aggregate) straight or curved on plan exc 6m mean radius, exc 10cm in width and built in CM (1:6) complete all as specified and as directed by Engineer in charge

Taking out old unserviceable PVC Pipe of size 75mm , 110mm & 150mm from trenches and walls with all fittings incl necessary excavation,RFR and Removal upto 250 mtrs complete all as specified and as directed by Engineer in charge

S&F150mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed by Engineer in charge

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls complete all as specified and as directed by Engineer in charge

S&F110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls complete all as specified and as directed by Engineer in charge

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to floors complete all as specified and as directed by Engineer in charge

S&F110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to floors complete all as specified and as directed by Engineer in charge

Refixing old pipes after taking down any dia complete all as specified and as directed by Engineer in charge

S&F 75mm dia PVC (SWR) bend with oval access door complete all as specified and as directed by Engineer in charge

S&F 110mm dia PVC (SWR) bend /shoe without oval access door complete all as specified and as directed by Engineer in charge

S&F110mm dia PVC (SWR) branch piece (single Y)equal or unequal with oval access door complete all as specified and as directed by Engineer in charge

S&F75 mm dia PVC (SWR) branch piece (single Y)equal or unequal with oval access door complete all as specified and as directed by Engineer in charge

S&F PVC (SWR) cowls 110mm dia complete all as specified and as directed by Engineer in charge

S&F PVC (SWR) cowls 75 mm dia complete all as specified and as directed by Engineer in charge

S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and as directed by Engineer in charge

S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and as directed by Engineer in charge

Excavation in trenches in hard / dense soil n.exc. 1.5M wide and n.exc. 1.5M deep and getting out all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and as directed by Engineer in charge

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m complete all as specified and as directed by Engineer in charge

S&F in repair PVC (SWR) floor trap,plain with CP grating 75/ mm with incl jointing with solvent cement complete all as specified and as directed by Engineer in charge

S&F in repair PVC (SWR) floor trap,plain with CP grating 110 mm with incl jointing with solvent cement complete all as specified and as directed by Engineer in charge

S&F in repair 75 mm PVC nahani trap with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed by Engineer in charge

S&F in repair 110 mm PVC nahani trap with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed by Engineer in charge

Removing & cleaning of blockage WC including WC trap of any description and in any position by removing sand/sludge/silt and other forein material deposited in it (either manually or mechanically) upto first manhole and making the sewage system functional to the entire satisfaction of Engr in Charge

Removing & cleaning of blockage from traps of bath rooms/ kitchen sink/ wash basin/ Urinal point and gully traps of any description and in any position by removing sand/sludge/silt and other forein material deposited in it (either manually or mechanically) upto first manhole and making the seweage system functional to the entire satisfaction of Engr in Charge

Taking out carefully the cover slab of gulley traps of any size and shape, depth and cleaning the block by removing the scum/sludge / any material to a distance exc. 250m and n.exc.500m and cleaning with fresh water placing the cover slab/ Grating in position complete all as specified and as directed by Engineer in charge

Cleaning of sewage lines using passing rubber ball through line to ensure all blockage perfectly clear or split bamboo with a gunny bag piece tied with bamboo with binding wire and inserting the bamboo in sewage lines of dia 100 mm and up to 200 mm through manhole/gully trap clear flow of sewage is observed in sewage pipe complete all as specified and as directed by Engineer in charge

Pumping out/dewatering of soakage wells septic tanks etc of any size and depth by machanical means i.e. pumping sets etc and removing the muddy water in liquid or semi-liquid/solid state to a distance exc. 250M and n.exc. 500M complete all as specified and as directed by Engineer in charge

Taking out and removing waste materials/foreign materials from septic tank by manual labour or mechanical means of any size and burying the entire sludge under ground in a pit of suitable size and covering the pit with earth or earth mixed rubbish and removing surplus soil to a distance n.exc 50m including necessary earth work in pit complete all as specified and as directed by Engineer in charge

Cleaning manhole with spades or bucket taking out sludge manhole and disposed off aside by burying the entire sludge under ground in a pit of suitable size by putting earth on it. Again use water with bucket and put into manhole to clear the sludge and ensure the sludge is drain out completely. The depth of manhole n. exc. 1 metre each. complete all as specified and as directed by Engineer in charge

Cleaning manhole with spades or bucket taking out sludge manhole and disposed off aside by burying the entire sludge under ground in a pit of suitable size by putting earth on it. Again use water with bucket and put into manhole to clear the sludge and ensure the sludge is drain out completely. The depth of manhole exc. 1metre but n.exc 2metre. complete all as specified and as directed by Engineer in charge

Cleaning manhole with spades or bucket taking out sludge manhole and disposed off aside by burying the entire sludge under ground in a pit of suitable size by putting earth on it. Again use water with bucket and put into manhole to clear the sludge and ensure the sludge is drain out completely. The depth of manhole exc. 2metre but n.exc 3metre. complete all as specified and as directed by Engineer in charge

M & L for clearing vegetation /Shrubs along with all the debris of leaf from Roof Slab/ Shaft Portion/ Chajjas & Parapet etc and making surface clean, making good with CM 1:3 or PCC 1:2:4 (12.5mm graded aggregate) as per the requirement complete all as specified and as directed by Engineer in charge

S&F 25MM outer dia union complete all as specified and as directed by Engineer-in-Charge

S&F in repair stainless steel friction stay hings 200 x 19 x 1.90mm of standard size complete all as specified and as directed by Engineer-in-Charge

Allied Trading Company (BID ID -3322865)

BISAKHA PLUMBING WORKS (BID ID -3322189)

Kathir Marketing Services (BID ID -3322788)

Ravi Enterprises (BID ID -3323056)

bansal construction (BID ID -3323064)

SKY GROUP (BID ID -3323327)

M/s Pooja Enterprises (BID ID -3322330)