Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.9 LAccepted-AOC BHAIRAVNATH NAGAR AT KUSGAON POST LONAVLA 410 401 DISTT PUNE | PUNE | MAHARASHTRA | 410401 | L1 | Accepted-AOC AOC | |
| 2 | L2₹29.6 L+₹3.5 L (13.4%)Rejected-Finance 601 A WING SAI PARAMOUNT APARTMENT SHRADDHA VIHAR COLONY INDIRANAGAR NASHIK NASHIK MAHARASHTRA 422009 | NASHIK | MAHARASHTRA | 422009 | L2 | Rejected-Finance GREATER THAN L1 | |
| 3 | L3₹29.6 L+₹3.5 L (13.5%)Rejected-Finance FLAT NO 401 TULSANI HEIGHTS 4TH FLOOR GREEN PARK SOCIETY AKURDI GURUDWARA TO WALHEKAR WADI ROAD CHINCHWAD PUNE 411033 | PUNE | MAHARASHTRA | 411033 | L3 | Rejected-Finance GREATER THAN L1 | |
| 4 | L4₹30.4 L+₹4.3 L (16.6%)Rejected-Finance GARDEN AVENUE PLOT NO 242 243 244 RH 4 SECTOR 21 NERUL NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L4 | Rejected-Finance GREATER THAN L1 |
Tender Value
₹33.9 L
EMD Value
₹68,000
Closing Date
1 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Gaurav Tiwari, IDSE, EE
GE (I) (NAVY), INS SHIVAJI - POST, LONAVLA -410402
ADDN / ALTN AND IMPROVEMENT OF SAX WING (BLDG. NO P-342) INCLUDING PROVN OF PARKING SHED FOR INLIVING OFFICERS IN WARDROOM MESS AT INS SHIVAJI LONAVLA
2023_MES_626811_1
GE/LONAVLA/8202/E8
Open Tender
Civil Works
Item Rate
270 days
GE (I) (NAVY) LONAVLA
As per NIT /Tender documents
6 documents required · 6 mandatory
₹500
Yes
GEINDEPNAVYLONAVLA
₹68,000
Yes
9 Feb 2024
4 Nov 2023
4 Dec 2023
4 Nov 2023
1 Dec 2023
18 Nov 2023
4 Nov 2023 - 17 Nov 2023
Amount
Taking down steel/aluminium windows/ventilator of any size with all fittings complete
M&L for powder coated aluminium two track, two shutters (of equal width), sliding type windows without sash bars including necessary jointing clips, rubber packing, neoprene rubber gasket, aluminium snap beading, screws, aluminium fittings, handles, locking arrangement (star lock), bearings (two No's for each sliding shutters) & 4.00mm thick plain glass for glazing with & including following powder coated sections as given in 'JINDAL' catalogue complete all as specified and as directed :- (i) Frame (Bottom)-20956 (ii) Frame (Top & Side)-20966 (iii) Shutter vertical (Handle lock)-20846.(iv) Shutter vertical (Int lock)-20845.(v) Shutter (Top)-20844.(vi) Shutter (Bottom)-20847. Note :- (i) The window opening shall be provided with two shutters of equal width. (ii) The shutters shall be placed in such a manner that at a time the entire width of window can be utilized as fully glazed window. (iii) The thickness of the powder coating shall not be less than 0.5 micron & the tint shall be as decided by GE. (iv) Sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window.
Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer?in-charge
M&L for pre polished Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed/ slurry mixed with pigment to match the shade of the slab all as specified and directed
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement
Taking down chowkats with shutters( without taking off shutters from the frame) exc1.5 sqm and n.exc 4 sqm each
S & F 2nd class Hard Wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed in position including Treating back surfaces with ready mixed paint, matt black and 6 Nos of hold fasts of 150 mm long made of MS Flat 25x5mm.
S&F 30 mm thick Flush Shutters, Solid core construction, with particle board core and both faces are covered with decoraative face veneer with lipping / frame to match
Preparing new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer.
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed
S&F in 125 mm thick Butt hinges, medium weight, cold rolled mild steel, and fixed
S&F 100 mm thick Butt hinges, medium weight, cold rolled mild steel, and fixed
S&F Aluminium bow handles, cast type, anodised 150 mm long
S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete
M&L for Brickwork with Modular bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 in narrow widths including Cutting out bricks/stone, for- ming toothing for, and bonding new into old brickwork /stone masonry
M&L for Rendering 15 mm thick CM 1:6 on fair faces of brick work or concrete surfaces and to be finished even and smooth(without using extra lime or cement)
M&L for Preparation of old plastered surfaces of walls,Pillars, cornices etc by brooming down with steel wire brush, scraping down smoke shoot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint up to 15 height complete all as directed.
M&L for 18 to 20 mm thick Granite (of any type) work in single piece (table rubbed and polished) in steps, floors, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade over and including 20mm thick CM (1:6) bedding layer complete all as specified and as directed.
Demolition of stone slabs and tiles of any description or thickness in floor aprons etc laid bedded and pointed in any mortor complete all as specified.
Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, as in floors/ walls etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed in CM 1:4
S&F Powder coated aluminium alloy curtain rod of any size including fancy type brakets all as directed by Engg-in-charge
S&F for Renewing glazed wall tiles in patches, area n exc 5 sq. m. including cutting out broken tiles, removing and cleaning loose tiles, preparing bed, removing rubbish and replacing old with new tiles to match, complete with all cuttings, etc. and laying or setting, jointing and pointing new or old tiles complete
S&F for Renewing floor tiles in patches, area n exc 5 sq. m. including cutting out broken tiles, removing and cleaning loose tiles, preparing bed, removing rubbish and replacing old with new tiles to match, complete with all cuttings, etc. and laying or setting, jointing and pointing new or old tiles complete
Dismantling of cast iron/PVC or reinforced concrete drain pipes, jointed in cement mortor anf taking out of trenches if required 100/75 mm internal dia pipe complete all as specified.
S&F PVC (SWR) pipes of dia 110mm bore single socketed in any length with rubber ring joints fixed to walls.
S&F PVC (SWR) pipe of 75 mm bore in single socketed in any length with rubber ring joints fixed to walls..
S&F in repairs PVC (SWR) bends of 110 mm dia bore with access door
S&F PVC(SWR) vent cowl of 110mm dia bore.
S&F PVC (SWR) branch piece, double (double Y) equal or unequal for 110 mm dia
S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110 mm dia
S&F in repairs PVC (SWR) bends of 75mm dia bore with access door
S&F PVC (SWR) branch piece, single (double Y) equal or unequal 75 mm dia
S&F PVC (SWR) branch piece, single (single Y) equal or unequal 75 mm dia
S&F in repairs Stack clamps made out of 50mm x 5mm flat iron fixed to any dia of pipe at any height. Including bolts and nuts and securing ends of stays to wall or roof
M & L PVC Nahani trap 75mm size with grating including jointing to waste pipe fixed in cement concrete type type B1 (1:2:4)
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.
M&L for Rendering 15mm thick cement plaster in CM 1:4 on brick work/concrete surfaces finished even and smooth with WPC all as specified and as directed (Note : WPC will be measured and paid separately)
Supply Integral Water Proofing Compound
Material and labour for complete removal of existing treatment, preparing surfaces and applying two coats of oil bound distemper over a coat of alkali resistance primer over 3mm thick Birla white wall care putty on walls complete all as specified and as directed.
Material and labour for Preparation of existing treatment, preparing surfaces and applying two coats of white wash on ceiling complete all as specified and as directed.
M&L for Preparation of old plastered surfaces of walls,Pillars, cornices etc by brooming down with steel wire brush, scraping down smoke shoot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface up to 15M height from ground level incldng removing and refixng wall paintngs boards and panels of any descripton complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.
S&F in repairs for 5 mm Sheet glass, ordinary quality and glazing as in Aluminiu windows, Doors, Ventilators etc in square/ rectangular shape exc 0.5 sq.m in each pane including taking out and removal of old glass all as directed.
S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with & including MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.
S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.
Taking down chowkats or frames N.exc 1.5 Sqcm with shutter (without taking of shutter from the frame.
S&F 12 mm thick toughned glass shutter of any size (Plain or frosted) fixed with all necessary patch fitting at all corner, with top and bottom pivot, locking arrangement and ball catcher including embosing/ itching of any figure or logo all as directed by Engr-In-Charge.
S&F aluminium powder coated ventilator partly fixed and partly louvered type without sash of bars, section as per designation 63400 of IS 737, frame and intermediate made out of aluminium section of size 50.80 x 25.40 x 0.95 mm (Catalogue No 14027 of M/s Jindal) including necessary heavy duty louvers (adjustable with locking arrangements), jointing clips, rubber packing, anodised snap beading, screws alongwith 4.00mm thick pin headed glass for louvers and glazing etc complete all as specified and as directed. Note:- (i) The thickness of the powder coating shall not be less than 0.5 micron & the tint shall be as decided by GE. (ii) Sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window.
Extra for forming fair finished drain or channel of 30cm or more inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc
M&L for Pre-cast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in manholes cover slabs with plain fair faces including necessary form work (Reinforcement shall be measured & paid separately) including set in CM 1:6 all as directed by Engg-In-Charge
S&F Mild steel TMT bars 8mm & above dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to
Completely removing existing water proofing treatment of any descriptions and any type including top layer of plaster / china mosaic wherever occurs over roof and chhajja surfaces and scrubbing the surface with wire brush and cleaning wash down with water to receive new cement plaster / PCC layer and removing the waste material / debris to a distance exc. 1500m but n.exc. 2000m etc complete all as specified and directed by Engr-in-charge.
M/L for rendering 10mm thick in cm 1:4 on concrete roof and chajja surface to get a uniform level surface for laying of membrane treatment all as directed
M&L for water proofing treatment to RCC roof slab all as specified below and as directed:- a) Apply one coat of bitumous primer @ 0.25 Kg/Sqm. (b) Apply a coat of blown type bitumen grade 85/25 heated to working temperature of 180 degree centigrade and applied at 1.20 Kg/Sqm of the surface area. (c) Laying APP polymer modified membrane 4mm thick with non woven polyster reinforcement weighing not less than 4.00 Kg/ Sqm applied by torch application method. (d) Apply a coat of blown type bitumen grade 85/25 heated to working temperature of 180 degree centigrade and applied at 1.20 Kg/sqm of the surface area. (e) Apply a coat of solar reflective bituminous aluminium paint @ 0.10 Kg/Sqm.
S & F in repairs Wash basin wall hung with half pedestal 550x400 mm as per CERA -CAT No. S2040105 wash basin and Cat No S2090102 Half pedestal including waste pipe connections and pillar tap complete all as specified
Supply and fix in repairs Vitreous china wash down water closet pan pedestal pattern white with and including fixing bolts, seat cover black closed pattern with flat bottom, mild steel chromium plated or aluminised hinging device, antisyphonage pipe and connection to drainand to flushing pipe but excluding PVC flushing cistern and flush pipe complete all as specified and as directed. Make: Cat No.C0297/C298 of Parryware or equivalent make as given in approved list of makes
Supply and fix in repair of PVC valveless syphonic action type flushing cistern 10 ltr capacity low level, white with inlet, ball valve float and handle including brackets complete all as specified and as directed.
Supply and Fixing in repair Vitreous china urinal, small, coloured, Size 340 x 280 X 470 MM flat back with grating and union for discharge (Excluding flushing cistern flush pipe and waste pipe) complete all as specified and as directed.
Supply and fixing flush pipe of polyethylene of low or high density of 32 mm dia for low level flushing cistern all as specified and as directed.
S&F Pillar taps 15 mm dia, cast copper alloy, with capstan heads, fancy type chromium plated ,screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe
S&F Bib taps 15 mm dia, fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm dia pipe.
S&F Stop valves 15 mm dia, fancy type chromium plated, screwed down, high pressure, screwed both ends for 15mm dia pipe or for unions fixed in repairs
S & F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified.
Taking up or down steel tubing of bore 15/20 mm and connection, including cleaning for refixing or removal complete all as specified.
Taking up or down steel tubing 25/32 mm and connection, including cleaning for refixing or removal to store complete all as specified.
Taking up or down steel tubing 40/50 mm and connection, including cleaning for refixing or removal to store complete all as specified.
S&F CPVC pipes, SDR 11, 20 mm outer dia of pressure rating 6 kgf/sqcm conforming to IS-15778 with all fittings such as Tee,Bends, elbows ,unions ,sockets and end pieces etc to receive fittings and fixed with solvents fixed to walls/ floors with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure
S&F CPVC pipes, SDR 11, 25 mm outer dia of pressure rating 6 kgf/sqcm conforming to IS-15778 with all fittings such as Tee,Bends, elbows ,unions ,sockets and end pieces etc to receive fittings and fixed with solvents fixed to walls/ floors with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure
S&F CPVC pipes, SDR 11, 32 mm outer dia of pressure rating 6 kgf/sqcm conforming to IS-15778 with all fittings such as Tee,Bends, elbows ,unions ,sockets and end pieces etc to receive fittings and fixed with solvents fixed to walls/ floors with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure
M&L for Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard dense soil/ soft rock
S&F for rolled steel section/ ms plates as in Posts, trusses (framed) Purlins, Rafters, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections of Fe410-W (Gde-E-250) qualit-A including fixed with welded/ rieveted joints or distance pieces, cleats etc.
S&F for rollled steel section as wind ties over roof sheet including securing with bolts/J hooks or self tapping screw at any height including necessary scaffolding etc all as directed Enngineer-in-charge
S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any design/colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws at any height all as specified and as directed.
S&F Pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.
52mm thick PVC Partition consisting of 12mm thick plain solid PVC ply sheet reinforced with frame work made from 40mm x 20mm MS tubes. In between two MS tubes, 5mm thick Plain heat moulded 'C channel of size 75mmx50mm with feathered edges shall be fixed on the floor, wall and ceiling. Plastic ply opanel shall be inserted in the PVC 'C channel. The first & last MS tube should be errected such that it is inside a PVC 'C channel, in between adjoining plastic panel, 5mm thick x75mm width plain PVC sheet feathered at edges shall be stick on the front & back face using solvent cement complete
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth; for foundation , etc or for shafts, wells, cesspits, manholes, pair holes, etc n.exc 10 Sqm on plan and n.exc 1.5 in depth and getting out in hard/dense soil.
M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation and mass concrete.
Removing building materilas such as bricks, stones, concrete, sand etc to a distance upto 15Km, beyond the lead included in the rates, including loading, unloading and stacking at the destination.
M&L for Rendering 15 mm thick CM 1:6 on fair faces of brick work or concrete surfaces and to be finished even and smooth(without using extra lime or cement)
M&L for 150mm Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfac
M&L for 100mm Cement concrete type D- 2, 1:4:8 (40mm graded aggregate)
M&L for prepolished Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade
M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping of manhole including watering slightly rounded, including necessary form work.
M & L for Filleting in any position and to any shape of sec area exc 25 Sqcm and n exc 50 Sqcm in cement mortar 1:4 including all mitres, stops, etc.
M&L for preparation of new steel surface of steel and applying two coats of synthetic enamel paint over a coat red oxide primer
M&L for Preparing old painted surfaces/ untreated surfaces of steel any description, over 10cm in width or grith, not otherwise described and applying one coats of Synthetic enamel paint complete all as specified and directed.,
M & L for Point wiring with 1.5 Sqmm (nominal area), FRLS PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including providing PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) FRLS PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including PVC terminal box fixed with suitable sizes cadmium plated iron screws and washers etc.for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point controlled by one ,one way switches complete all as specified and directed by engineer in charge. (a) One light point or one fan point or bell point controlled by one switch
Supply and fixing Batten 1x18W(single side supply)for LED TUBE LIGHT pre -coated CRCAA sheett, end caps made up with engineering plastic all as specified and directed by engineer in charge.Make : Bajaj (BLRB - DB 118) or equivlent PhilipsHavells.
Supply and fixing ROD 1x18W (single side supply)for LED TUBE LIGHT T8 tube with polycarbonate body all as specified and directed by engineer in charge.Make : Bajaj (BLRB - 20W LED) or equivlent PhilipsHavells.
Supply and fixing Higher Wattage flood light luminaire with ultra sleek, light weight and secondary obptics, made of pressure die cast housing with IP66 ingress protection and impact resistance of IK07.4k inbulit and 10kv external surge protection. Make Bajaj (BJFL 100W LED I) or equivalent phillips / Havells
Supply & fix exhaust fans steel body AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and directed by engineer in charge. Make Havells Note:- Cost of making hole for Exhaust fan of required size at site is deemed to be included in qoted rates.
SAI SAMARTH ENTERPRISES
SHAILENDRA B TULSANI
M/s S.D Construction Co
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .