KMC/WS-CENTRAL/47/2025-2026

Earthwork in excavation in trenches in all sorts of soils incldg mixed soil but excluding laterite or sand stones incldg removing spreading or stacking the spoils within a lead of 75 mtr as directed.( The item includes necessary trimming the sides of trenches levelling dressing & ramming the bottom bailing out water etc as reqd complete)...... Depth upto 1.50 mtr. Below G.L.

Gas cutting of M.S. pipes and/ or M.S. plates of different thickness all complete as per specification & direction of the Engineer in charge…... 10 mm thick plate.

Removing old paint from blistered painted surface of steel or other metal by chipping including scraping and cleaning and exposing the original surface….... 10mm thickness

Field welding of M.S. plate by means of electric arc welding as per relevent IS specification using standard electrodes including edge preparation and charges of deployment of electric generator set with fuel, lubricant, and all other tools and plants all complete as per specification and direction of Engineer-in-charge. [ Engineer-in-charge shall approve the electrodes for arc welding before use ]..... Throat thickness in mm..... 10mm thickness

Application of two coats of Epoxy primer as per BS 5493 by brush on the cleaned dry concrete surface with epoxy resin primer with reactive suitable hardener mixture as per specification and direction of EIC all complete. [This item will be operated on prior permission from the concerned SE/Dy Chief Engineer]

Coating of 'Epoxy' Resin of thickness not less than 160 micron with a lowviscosity, crystallization-resistant epoxy resin base with a reactive diluents combined with high build epoxy amine adducts as per BS 5493 standard and a polyamide or amido polyamine or any other suitable hardener. It shall react with epoxy resin at normal ambient temperature, suitable for solvent-free coatings as per recommended proportion for use on metal, concrete and wood surface to protect from corrosion as well as damage from chemical reaction after making the surface free from dust, oil and moisture etc. all complete as per instruction and to the satisfaction of ElC. [ This item will be operated on prior permission from the concerned SE/Dy Chief Engineer]

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. [Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof.].... I) For structural members of specified sections weighing less than 22.5 Kg./m

Ductile iron double flanged manually operated sluice valve generally conforming to IS : 14846, having body, door, dome, gland in graded ductile iron to IS 1865, four faces and spindle nut of gun metal to IS : 318, inside screw non-rising stainless steel AISI-410 spindle valves suitable for maximum working pressure of 10/16 kg/cm2 and body tested 15/24 kg/cm2. Flanges drilled to IS: 1538 table 4 & 6. Valves tested by closed end method only. 350mm and above valves are complete with enclosed gear box with anti friction device..... 150 mm dia.

Lowering, fitting and fixing of all types of valves in proper position and alignment using chain pully block or crane (for diameter above 250 mm) by providing temporary support, as required, gaskets, nuts & bolts etc. all cornplete as per specification and direction of the Engineer-in-charge. [The rate Includes cost of flange joints]..... 150 mm dia.

Hire charges of moveable crane with fuel & manpower having load handling capacity upto 14MT with the 45 deg. moveable arrangement & the boom length of 40 feets for loading & unloading of various materials / accessories of water supply works. For minimum engagement of 8 hrs. in a day

Ductile iron Single Chamber type air release valve having small orifice elastic ball resting on gun metal orifice nipple large orifice vulcanite ball seating on moduled seat ring, valve with built-in-Kinetic features, isolating sluice valve mounted in horizontal position and operated by a metre wheel gearing:inlet faced and drilled to IS 1538 Table 4 & 6. valve suitable for maximum working pressure of 10 kg/C..... 150 mm dia.

Earthwork in filling in foundation trenches or plinth with good earth in layers not exceeding 150mm including watering & ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)….. with earth obtined from excavation of trenches.

Sub Total

Please Enable Macros to View BoQ information