MAINT OF WOODEN FURNITURE IN AKHNOOR MIL STN UNDER GE SOUTH AKHNOOR.

Amount

REPAIR TO BED HARD WITH PLYWOOD TOP [FD-21(M), FD-246 and FD-247]

M&L for Replacement of unserviceable/ broken/ damaged plywood or newar of Bed with new plywood top, 12mm thick with 7 ply commercial, BWR grade, type BB, size 1900mmx900mm, fixed with nails, complete all as specified and shown in drawing and as directed by Engineer-In-Charge.

M&L for Replacement of unserviceable/ broken/ damaged head rest board with new head rest board, made with second class hard wood frame and 4.0mm thick, veneered phenol bonded ply wood, teak face on both sides of head rest of the bed including 4.0mm thick teak wood beading all round, fixed with mails, complete all as specified and shown in drawing and as directed by Engineer-In-Charge.

M&L for Replacement of unserviceable/ broken/ damaged foot rest board with new foot rest board, made with second class hard wood frame and 4.0mm thick, veneered phenol bonded ply wood, teak face on both sides of head rest of the bed including 4.0mm thick teak wood beading all round, fixed with mails, complete all as specified and shown in drawing and as directed by Engineer-In-Charge.

M&L for Preparation to wooden surfaces of bed hard with plywood top and polishing with melamine polish by compressor to all exposed to view surfaces, complete all as specified and as directed by Engineer-In-Charge.

REPAIR TO CHAIR WRITING [FD-20 and FD-280]

M&L for Replacement of unserviceable/ broken/ damaged rear leg with new rear leg, made of 2nd class hard wood, seasoned, size 890x55x30mm and fixing, complete all as specified and shown in drawing and as directed by Engineer-In-Charge.

M&L for Replacement of unserviceable/ broken/ damaged front leg with new front leg, made of 2nd class hard wood, seasoned, size 675x55x30mm and fixing, complete all as specified and shown in drawing and as directed by Engineer-In-Charge.

M&L for Replacement of unserviceable/ broken/ damaged stiffener with new stiffener, made of 2nd class hard wood, seasoned, size 535x65x30mm and fixing, complete all as specified and shown in drawing and as directed by Engineer-In-Charge.

M&L for Replacement of unserviceable/ broken/ damaged arm rest with arm rest, made of 2nd class hard wood, seasoned, size 535x65x30mm and fixing, complete all as specified and shown in drawing and as directed by Engineer-In-Charge.

M&L for Replacement of old unserviceable/ broken/ damaged cane from chairs writing , cleaning to cane holes and weaving with new cane, 2.0mm wide, 0.50mm thick, half round, approved quality weaving in "Godrej Pattern" using minimum weight of cane mentioned in drawging including removal of existing polishing from the wooden surface and repolishing with french polish, 4.0mm wide, half round cane to be used as border all around, complete all as specified and as shown in respective drawings and as directed by Engineer-In-Charge.

M&L for Repair to chair writing including dismantling of old broken parts and fixing new parts as mentioned above to make it serviceable, complete all as specified and as shown in respective drawings and as directed by Engineer-In-Charge.

M&L for Preparation to wooden surfaces of chair writing and polishing with melamine polish by compressor to all exposed to view surfaces, complete all as specified and as directed by Engineer-In-Charge.

REPAIR TO CHAIR DINING [FD-16, FD-228, FD-279 and FD-1105]

M&L for Replacement of unserviceable/ broken/ damaged rear leg with new rear leg, made of 2nd class hard wood, seasoned, size 890x55x30mm and fixing, complete all as specified and shown in drawging and as directed by Engineer-In-Charge.

M&L for Replacement of unserviceable/ broken/ damaged front leg with new front leg, made of 2nd class hard wood, seasoned, size 460x55x30mm and fixing, complete all as specified and shown in drawing and as directed by Engineer-In-Charge.

M&L for Replacement of unserviceable/ broken/ damaged stiffener with new stiffener, made of 2nd class hard wood, seasoned, size 440x65x30mm and fixing, complete all as specified and shown in drawing and as directed by Engineer-In-Charge.

M&L for Replacement of unserviceable/ broken/ damaged seat rail with new seat rail, made of 2nd class hard wood, seasoned, size 440x65x30mm, including making holes for canning and fixing, complete all as specified and shown in drawing and as directed by Engineer-In-Charge.

M&L for Replacement of old unserviceable/ broken/ damaged cane from chairs dining , cleaning to cane holes and weaving with new cane, 2.0mm wide, 0.50mm thick, half round, approved quality weaving in "Godrej Pattern" using minimum weight of cane mentioned in drawging including removal of existing polishing from the wooden surface and repolishing with french polish, 4.0mm wide, half round cane to be used as border all around, complete all as specified and as shown in respective drawings and as directed by Engineer-In-Charge.

M&L for Repair to chair dining including dismantling of old broken parts and fixing new parts as mentioned above to make it serviceable, complete all as specified and as shown in respective drawings and as directed by Engineer-In-Charge.

M&L for Preparation to wooden surfaces of chair dining and polishing with melamine polish by compressor to all exposed to view surfaces, complete all as specified and as directed by Engineer-In-Charge.

REPAIR TO CHAIR DINING CUSHIONED [FD/MAP-II/04 and FD/E6/MAP/16R]

M&L for Replacement of unserviceable/ broken/ damaged stiffener with new stiffener, made of 2nd class hard wood, seasoned, complete all as specified and shown in drawing and as directed by Engineer-In-Charge.

M&L for Replacement of Unsv cushion of chair dining offr with new cushion of thickness 75 mm , density 32 mm of make; Sleepwell/Springwell//Komfort universe, tapesty cloth should not be less than RS 350/meter, colour of tapesty cloth with fabric on seat of 12 mm thick plywood , as directed by Engineer-In-Charge. Make of upholestry should be Laurel/HR/Blessed International

M&L for Repair to chair dinning cushioned including dismantling of old broken parts and fixing new parts as mentioned above to make it serviceable, complete all as specified and as shown in respective drawings and as directed by Engineer-In-Charge.

M&L for Preparation to wooden surfaces of chair dining cushioned and polishing with melamine polish by compressor to all exposed to view surfaces, complete all as specified and as directed by Engineer-In-Charge.

REPAIR TO CHAIR EASY [FD-17 and FD-229]

M&L for Replacement of unserviceable/ broken/ damaged rear leg with new rear leg, made of 2nd class hard wood, seasoned, size 890x50x25mm and fixing, complete all as specified and shown in drawing and as directed by Engineer-In-Charge.

M&L for Replacement of unserviceable/ broken/ damaged front leg with new front leg, made of 2nd class hard wood, seasoned, size 545x50x25mm and fixing, complete all as specified and shown in drawing and as directed by Engineer-In-Charge.

M&L for Replacement of unserviceable/ broken/ damaged hand rest/ arm rail with new arm rest/ hand rail, made of 2nd class hard wood, seasoned, size 61x65x25mm and fixing, complete all as specified and shown in drawing and as directed by Engineer-In-Charge.

M&L for Replacement of old unserviceable/ broken/ damaged cane from CHAIR EASY , cleaning to cane holes and weaving with new cane, 2.0mm wide, 0.50mm thick, half round, approved quality weaving in "Godrej Pattern" using minimum weight of cane mentioned in drawging including removal of existing polishing from the wooden surface and repolishing with french polish, 4.0mm wide, half round cane to be used as border all around, complete all as specified and as shown in respective drawings and as directed by Engineer-In-Charge.

M&L for Repair to CHAIR EASY including of dismantling old broken parts and fixing new parts as mentioned above to make it serviceable, complete all as specified and as shown in respective drawings and as directed by Engineer-In-Charge.

M&L for Preparation to wooden surfaces of chair easy and polishing with melamine polish by compressor to all exposed to view surfaces, complete all as specified and as directed by Engineer-In-Charge.

REPAIR TO CHAIR DINING JCOs/ORs (FD/MAP-II/05)

Replacement of unserviceable /broken/damage stiffener with new stiffener of 1st class hardwood , seasoned and fixing, complete all as per specifiedand shown in drawingand directed by Engineer -in- charge

M&L for Replacement of Unsv PVC seat with new PVC seat 4 mm thick of PPCP material and weight not less than 0.5 KG with perforated holes shall be fixed inside the frame of seat with proper screws , as directed by Engineer-In-Charge. Make of seat : Amco/Nilkamal

M&L for Repair to CHAIR DINING including dismantling of old broken parts and fixing new parts as mentioned above to make it serviceable, complete all as specified and as shown in respective drawings and as directed by Engineer-In-Charge.

M&L for Preparation to wooden surfaces of chair dining and polishing with melamine finish with compressor and as directed by Engineer-in-Charge.

UPHOLSTERING OF SOFA SET FIVE SEATER/ SOFA CHAIRS (FD-258, FD-281, FD-373 and FD-1113)

M&L for Replacement of old unserviceable/ damaged foam cushion from with new foam cushion, of Make Sleepwell/lKomfort universe/Coolfoam/Nidiya, 100mm thick, 40 density, of size 560x520x100mm, covered with tapestry cloth,alongwith provosion of best quality zip, complete all as specified and shown on drawings and as directed by Engineer-In-Charge including Preparation to wooden surface of sofa with polish alongwith melamine finish with compressor. Make of upholestry should be Laurel/HR/Blessed International

M&L for Replacement of old unserviceable/ damaged cushion cover from with new cushion cover( tapestry cloth),alongwith provosion of best quality zip of size 22"x21"x4", fabric of cover shall not be less than Rs 400/- per meter as specified and as directed by Engineer-In-Charge .

REPAIR TO TABLE 900x600x760mm WITH DRAWERS AND WITHOUT DRAWERS (FD-41, FD-42, FD -283 and FD-284)

M&L for Replacement of old unserviceable/ broken/ damaged top form table 900x900x760mm with new top made of 18/19mm thick particle board prelaminated, exterior grade, duly edging with 4mm thick teak wood beading all around, complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

M&L for Repair to table 600x600mm including dismantling of old broken part and fixing new parts as mentioned. table shall be set right by providing 75x75mm teak wood triangular corner between top and leg,complete all as specified and shown in the drawings and as directed by Engineer-In-Charge

M&L for Preparation to wooden surfaces of table 900x900x760mm with/ without drawer and polishing with melamine polish by compressor to all exposed to view surfaces, complete all as specified and as directed by Engineer-In-Charge.

REPAIR TO TABLE WRITING (FD-249 and FD-275)

M&L for Replacement of old unserviceable/ broken/ damaged top with new top made of 18/19mm thick particle board prelaminated, exterior grade, duly edging with 4.0mm thick teak wood beading all around, complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

M&L for Replacement of old unserviceable/ broken/ damaged drawer from table with new drawer, made of 1st class hard wood except bottom and front face, bottom shall be of 6.0mm ply wood bottom BWR grade and front face shall be of 18/19mm thick prelaminated particle board and one side teak face, complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

M&L for Replacement of old unserviceable/ broken/ damaged door shutter/ side board with with new door shutter/ side board of pre-laminated particle board 18mm with one side teak face and edging with 4.0mm thick teak wood beading including piano hinges, screwed and new brass knob,complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

M&L for Repair to table writing including dismantling of old broken part and fixing new parts as mentioned. table shall be set right by providing 75x75mm teak wood triangular corner between top and leg,complete all as specified and shown in the drawings and as directed by Engineer-In-Charge

M&L for Preparation to wooden surfaces of table writing and polishing with melamine polish by compressor to all exposed to view surfaces, complete all as specified and as directed by Engineer-In-Charge.

REPAIR TO TABLE DINNING 6/ 8 PERSONS (FD-239, FD-273 and FD-376)

M&L for Replacement of old unserviceable/ broken/ damaged top from table dinning 6-pers with new top made of 18/19mm thick particle board prelaminated, one side natural teak face, exterior grade, duly covered with 4mm thick teak wood beading all around, complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

M&L for Replacement of old unserviceable/ broken/ damaged top from table dinning 8-pers with new top made of 18/19mm thick particle board prelaminated, one side natural teak face, exterior grade, duly covered with 4mm thick teak wood beading all around, complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

M&L for Replacement of old unserviceable/ broken/ damaged existing leg with new leg, made of 1st class hardwood, seasoned, complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

Repair to table dining 6/8 person including dismantling of old broken part and fixing new parts as mentioned. table shall be set right by providing 75x75mm teak wood triangular corner between top and leg,complete all as specified and shown in the drawings and as directed by Engineer-In-Charge

M&L for Preparation to wooden surfaces of table dining 6/ 8 persons and polishing with melamine polish by compressor to all exposed to view surfaces, complete all as specified and as directed by Engineer-In-Charge.

REPAIR TO TABLE DRESSING LADIES (FD-32, FD-251 and FD-378)

M&L for Replacement of old unserviceable/ broken/ damaged/ blurr mirror and wooden frame with new mirror, 5.0mm thick, electro-copper plated and teak wooden frame 6.0mm thick and 6.0mm thick plywood on back side frame, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

M&L for Replacement of old unserviceable/ broken/ damaged top form table dressing gents with new top made of 18/19mm thick particle board prelaminated, one side natural teak face, exterior grade, including 4.0mm thick teak wood edging al-around on edges, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

M&L for Replacement of old unserviceable/ broken/ damaged knobs from drawers with new knobs, metallic, anodized copper plated knob, 32mm dia, including mettalic screw, complete all as specified and as directed by Engineer-In-Charge.

M&L for Repair to table dressing ladies including dismantling of old broken part and fixing new parts as mentioned to make it serviceable,complete all as specified and shown in the drawings and as directed by Engineer-In-Charge

M&L for Preparation to wooden surfaces of table dressing ladies and polishing with melamine polish to all exposed to view surfaces, complete all as specified and as directed by Engineer-In-Charge.

REPAIR TO TEAPOY (FD-278 and FD-382)

M&L for Replacement of old unserviceable/ broken/ damaged top form teapoy with new top made of 18/19mm thick particle board prelaminated, one side natural teak face, exterior grade, duly covered with 4mm thick teak wood beading all around, complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

M&L for Preparation to wooden surfaces of teapoy and polishing with melamine polish to all exposed to view surfaces, complete all as specified and as directed by Engineer-In-Charge.

REPAIR TO TABLE CENTRE, SIZE 900X450mm (FD-29 and FD-274)

M&L for Replacement of old unserviceable/ broken/ damaged top form table centre with new top made of 18/19mm thick particle board prelaminated, one side natural teak face, exterior grade, duly covered with 4mm thick teak wood beading all around, complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

M&L for Preparation to wooden surfaces of table centre and polishing with melamine polish to all exposed to view surfaces, complete all as specified and as directed by Engineer-In-Charge.

REPAIR TO PEG TABLE (FD-25, FD-277 and FD-384)

M&L for Replacement of old unserviceable/ broken/ damaged top form peg table with new top made of 18/19mm thick particle board prelaminated, one side natural teak face, exterior grade, duly covered with 4mm thick teak wood beading all around, complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

M&L for Preparation to wooden surfaces of peg table and polishing with melamine polish to all exposed to view surfaces, complete all as specified and as directed by Engineer-In-Charge.

REPAIR TO CHAIR WRITING CUSHIONED (FD/E6/MAP/12)

M&L for Replacement of old unserviceable/ broken/ damaged seat and back with new 120mm hot pressed plywood, upholstered with fabric and moulded polyurethane foam with PVC lipping all around, Polyutherane foam shall be 50mm thick, moulded with density 50-55 Kg per Cum and 20±2 Kg on hampden machine, complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

M&L for Replacement of old unserviceable/ broken/ damaged hand rest with new hand rest of size 240x64x3.30mm, made of polyurethane foam 76-85 shore 'A' hardness and reinforced with metal including scratch proof and weather resistance, complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

REPAIR TO CHAIR REVOLVING (VARIOUS TYPES) (TP/MAP)

M&L for Replacement of old unserviceable/ broken/ damaged seat and back with new seat and back of different sizes, made with fabric and moulded polyurethane foam together with seat and back cover. Back foam will be disigned with contoured lumber support for extra comfort. Polyutherane foam shall be machine moulded with density 45±2 Kg/ Cum and hardness 20±2 Kg on hampden machine at 25% compression.The colour, texture and shade of fabric to be used shall be approved from engr-in-charge and shall contain materials Acrlic, Polyster, Poly-viscose and Polypropyline. One sample shall be got approved by Engineer-in-charge .Rest all as shown in the drawings and as directed by Engineer-In-Charge.

M&L for Replacement of old unserviceable/ broken/ damaged hydraulic system of chair .The piston and hydraulic of chair will be of best quality of godrej or equivalent make . Complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

M&L for Replacement of old unserviceable/ broken/ damaged arm rest with new arm rest, made of black integral skin polyurethane reinforced with mild steel inserted, having scratch and weather resistance with 50-70 shore ‘A’ hardness. Arm rest shall be fitted to seat with powder coated arm rest brackets made of 5.0mm thick HR steel, complete all as specified and as per existing pattern and design and as directed by Engineer-In-Charge.

M&L for Replacement of old unserviceable/ broken/ damaged wheel castors with new wheel castors, injection moulded in black nylon for trouble free movement, complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

Repair to Tabel Bed Side Map (FD/E6/MAP/15 R

M&L for Replacement of old unserviceable/ broken/ damaged top form table bed side map with new top 18/19mm thick particle board prelaminated, exterior grade, duly covered with 4mm thick teak wood beading all around duly complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.Note- colour of polish and particle board to wooden furninture as directed by GE.

M&L for Replacement of old unserviceable/ broken/ damaged sides form table bed side map with new sides 18/19mm thick particle board prelaminated, exterior grade, duly covered with 4mm thick teak wood beading all around duly complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.Note- colour of polish and particle board to wooden furninture as directed by GE.

M&L for Replacement of old unserviceable/ broken/ damaged back form table bed side map with back made of ply of 6mm thick commercial plywood of existing size duly complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.Note- colour of polish and particle board to wooden furninture as directed by GE.

M&L for Replacement of old unserviceable/ broken/ damaged top drawer form table bed side map with new top drawer complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.Note- colour of polish and particle board to wooden furninture as directed by GE.

M&L for Replacement of old unserviceable/ broken/ damaged lower Drawer form table bed side map with new lower drawer complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.Note- colour of polish and particle board to wooden furninture as directed by GE.

Replacement of old unserviceable/ broken/ damaged drawer channel form both drawer of table side map with new drawer channel of size 12" length to both drawer, complete all as specified and as directed by Engineer-In-Charge.Note- colour of polish and particle board to wooden furninture as directed by GE.

M&L for Replacement of old unserviceable/ broken/ damaged handle of table bed side map with new handle of stainless steel 100mm long with complete assemply complete all as specified and as directed by Engineer-In-Charge

M&L for Preparation to legs of table bed side map and painting with black colour finish to all exposed to view surfaces, complete all as specified and as directed by Engineer-In-Charge.

Repair to Computer Table (FD/E6/MAP/03)

M&L for Replacement of old unserviceable/ broken/ damaged top from computer table with new top 18/19mm thick particle board prelaminated, exterior grade, duly covered with 4mm thick teak wood beading all around duly complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.Note- colour of polish and particle board to wooden furninture as directed by GE.

M&L for Replacement of old unserviceable/ broken/ damaged keyboard shelf from computer table with shelf 18/19mm thick particle board prelaminated, exterior grade, duly covered with 4mm thick teak wood beading all around alongwith steel channel duly complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.Note- colour of polish and particle board to wooden furninture as directed by GE.

M&L for Replacement of old unserviceable/ broken/ damaged drawer from computer talbe with new drawer 18/19mm thick particle board prelaminated, exterior grade, duly covered with 4mm thick teak wood beading all around alongwith steel channel complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.Note- colour of polish and particle board to wooden furninture as directed by GE.

M&L for Replacement of old unserviceable/ broken/ damaged base from computer table with new base 18/19mm thick particle board prelaminated, exterior grade, duly covered with 4mm thick teak wood beading all around duly complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.Note- colour of polish and particle board to wooden furninture as directed by GE.

M&L for Preparation to steel surfaces of computer table and polishing with polishing with melamine finish to all exposed to view surfaces, complete all as specified and as directed by Engineer-In-Charge.

Table 1200x900x760mm(table Dining 4 Person ( FD/MAP-II/03)

M&L for Replacement of unsv tops and S&F new top of Table after minor repair making the structure stable. Tops shall be of pre-laminated particle board of 18/19mm thick with decorative teak veneers one side and other side white including the provision of 3 mm thick wood edging of shesham wood french polished of all as shown on drawing and as specified.

M&L for Repair to table Dining 4 Person by providing 75x75mm teak wood triangular corner between top and leg to make it serviceable,complete all as specified and shown in the drawings and as directed by Engineer-In-Charge

M&L for Preparation to wooden surfaces of table Dining 4 Person and polishing with melamine polish to all exposed to view surfaces, complete all as specified and as directed by Engineer-In-Charge.

SCHEDULE 'A' PART-I : BOQ OF ITEMS. Note- Colour of polish and particle board to Wooden Furniture as directed by GE

VEE KAY IND (BID ID -3495649)

JAINCO STEEL INDUSTRIES (BID ID -3505136)