Misc Civil and Electric Work at Motimahal Shreenathji Mandir Nathdwara

Amount

Providing Wall punning in POP in line and level and right angles with AVERAGE 10mm thk including Grooves 5mmx5mm , all scafolding at any level and height.At no point of time the maximum thk of the POP to be more than 12mm thk.all complete upto the satisfaction of client / arch / engg

Providing and fixing precast reinforced cement concrete mehrab 75 mm thick with both side carving as per drawing detail as approved by Engineer In Charge.Clear opening Size 2900mm - 3000mm Long . Mehrab Height Upto 1200 mm

Supply and Fixing of Fastener 10 mm dia and 150 mm long hilty make

Supply and Fixing Decorative Precast RCC Half Pillar of approximate Size 150x150 mm and Approximate Height 2400mm

Providing and installation of Poly Carbonate Sheet roofing over existing steel framing as per drawing and design including fixing with non-corrodible nuts and water proof washers as per instruction of Engineer-in-charge.16 mm thick

POP false ceiling Providing & fixing suspended ceiling , which includes GI perimeter channels of size 0.55 mm thk. ( having one flange of 20mm and another flange of 30mm and a web of 27 mm) along with perimeter of ceiling , screw fixed to brick wall / partition etc. with the help of nylon sleeves and screws at 450mm centers. Then suspending GI intermediate channels of size 49 mm ( 0.9mm thk. With two flanges of 15 mm each) from the soffit at 900 mm centers with ceiling angles of width 25mm x 25mmx0.55 mm thick fixed to soffit up to 1.5m height with M.S. Cleat and steel expansion fasteners of half a (½) inch good quality of length 40mm , ceiling section of 0.55mm thickness having knurled web of 50mm and two flange of 26mm each with lips10.0mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 450 mm centers. 12.0 mm tapered edge POP sheet of size 900x600 is then screwfixed to ceiling section with 25mm x 8mm GI screw at 230mm centers ,Rates are including all necessary scaffolding , side pattas , cut outs , making grooves etc. as per drgs 004-R1 / 005-R1 , etc, all complete upto the satisfaction of CLIENT,ARCH,ENGG. MODE OF MEASURMENT :- MEASURMENT WILL BE IN SQM ONLY , MEASURMENT FOR HORIZONTAL / VERTICAL / INCLINED PATTAS LESS THAN 300MM WILL ALSO BE CALCULATED IN SQM AS PER ACTUALS.

Providing & Laying POP Cornice of required design & pattern in ceiling including nailing & scafollding etc. complete with fine finishing of size:75mm x 75mm

Providing & Fixing of IP-20 LED Recessed / Surface Mounted, Round / Sqaure SMD Mid Power LED Downlight with power coated die-cast aluminum housing with UV Stabilized non yellowish Diffuser with BIS complience 2.5 KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency > 85% . System Lumen efficacy of ≥ 110 lm / watt, THD < 10 % , Pf.≥0.95, CRI >80, life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. .Minimum lumen output 650 lm Warm White Make - Philips, Havells, Wipro

Providing & Fixing of BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. 4 blade antique type All as per pre approved by Engineer in charge

P & F of IP20 LED batten type light fixture made from CRCA sheet steel housing suitable for moutning LED tube system (integral driver), Power Consumption of 18W / 36W 1500-3000 lumens, system lumen efficiency 80 lm/Watt output, life time of 50,000 burning hours with 70% initial lumen maintained. CCT 3000°K, 4000°K & 6000°K.. G-1 4' LED Tube shape fixture 18W Warm white

Supply, installation, testing & commissioning of wall/flush mounted hangging light with 5w filament led bulb including all as per pre approved by Engineer in charge,making connections, testing etc. as required. All as per pre approved by Engineer in charge

Hanging light fixture in room Vertica 10 Watt Pendant Mounted White Short LED Down Lighter (Warm White, Pack of 1) All as per pre approved by Engineer in charge

Bidder Name

Amount

NIDHI CONSTRUCTION COMPANY (GSTN-NA) BID ID -3387619