CA NO. GE (W)/HSR-61/2023-24 REWIRING OF OTM ACCN AT HISAR MIL STN

Amount

Taking down carefully copper/ Aluminium point wiring ( light, fans, socket, power socket) complete incl taking out existing unserviceable terminal boxes and conduit with swithces/sockets/fan regulators and fittings such as ceiling roses, pendants, tube lights fittings lamp holders, brackets light fittings, rectangular blocks DB MCCB etc and making good disturbed surface of wall/ floor etc to match with the existing the surface etc complete and directed by engr in charge

Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site.including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multisrtaned copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in Cm 1:3 and finishing the surface as per exisitng treatment all as specified

Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in existing PVC/metallic rigid non metallic concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site.including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multisrtaned copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in Cm 1:3 and finishing the surface as per exisitng treatment all as specified. (existing conduit)

Description all as per item No 2.00 (here-in-before) but One three pin 5 Amp socket outlet point on indep board controlled by one nos, one way switch on indep board all as specified and directed

Description all as per item No 2.00 (here-in-before) but One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board all as specified and directed

Description all as per item No 2 above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on indep bd.

S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts all as specified and directed

S&F Modular switch 2 way 6A Single pole, Two way, 230 volts all as specified and directed

S&F Modular switch 1 way 16A 1 module all as specified and directed

S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed.

S&F Modular socket 6A/16A -2/3 pin combined 2 module type AC complete all as specified and directed.

S&F Modular lamp holder, insulated body with back plate suitable for LED Lamp complete all as specified and directed

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete Make Orients or its equvalent.

S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed

S&F modular fan step regulator 120W-2 module suiatable for 1200/1400 mm sweep ceiling fan etc complete all as specified and directed

S & F for wall mounted LED tube light fitting 20 watts batten not less than 120 lumen/watt for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make Orients or its equvalent.

S&F i Sheet metal enclosure distribution board SPN,8 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed.

Supply and fixing MCBs SP 6 to 32 Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :-Note : Make of the MCB should be the same as that of DB

Supply and fixing MCBs SPN 40 Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :-Note : Make of the MCB should be the same as that of DB

S&F i Sheet metal enclosure distribution board TPN,4 way, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar and grouting, fixing on wall with nut bolts wasshers proper with pcc works in repair complete all as specified and directed

Supply and fixing MCBs FP 63 Amps, 415 volts, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :-Note : Make of the MCB should be the same as that of DB

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source not less than 120 lumen/watt and electronic driver of capacity 30 watts with pre wired and necessary mounting arrangements and provision of 1.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including 40 mm dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- Orients and its equivalent

Taking down old U/S submain wiring including fitting & fixtures and making good of the surface to match with the existing complete all as specified and directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit.

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

Supply and Fixing in replacement LED light fittings 36/42 watt Surface Mounting/Recess mounting light i , 3 way mounting arrangement (Surface mounted, 2x2) Sheet aluminium housing with high quality LGP and PMMA diffuser. Separate HPF driver 240 volt along with fixing arrangements all as specified and directed.(Note; Colour of light as per direction of Engr-In-Charge) Make Orients or its equvalent.

S&F 40 Watt LED 5700 K light fitting environmental friendly, new generation, energy saving, recess mounted downlighter with high power COB LED as light source & clear glass and separate replaceable electronic driver suitable for cealing cutout 198 mm, hight 120 mm pre wired complete with all necessary fitting as directed and specified Make Orients or its equvalent.

S&F Dimmable driver for 40 Watt downlight all as specified and directed.

S&F 25 Watt post top luminarie made of pressure die cast aluminium housing 240 valt AC 50 Hz prewired complete with necessary fitting all as specified and directed.Make Orients or its equvalent.Make Orients or its equvalent.

S&F Exit light fittings single sided LED signage with build with built in battery backup for 02 Hrs marked with 'EXIT' Make Orients or its equvalent.. BESL 03 LED SSD WBB green complete all as specified & directed.

S&F in replacement low voltage projection lamp/ shadowless lamp suitable for OT light 12V, 50W type 7027 BRL/BCD AI/220 complete all as specified and directed

S&F LED surface mounted Bulk Head back lit light 9/10 Watt all as per specified and directed

M/S KAVITA CONSTRUCTION

M/s Devendera construction

malik constructions

KUNAL ENTERPRISES

Natwadia Electrical Company