REPAIR MAINT AND CLEANING OF SEWAGE LINE MANHOLES SEPTIC TANK OTM AND WELCOME MAINTENANCE TO JCOS AND OR QTR AT CHM PIRU SINGH LINE OF AGE BR I AREA UNDER GE MIS MHOW

Amount

Demolition of brick work built in cement mortar of any description including all quions arches, pillars, etc complete all as specified and directed.

M&L for brickwork with using flaysh bricks modular size, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

All as per item No 2.00 above but except brick.

M&L for half brick work in CM (1:4) with using flaysh bricks modular size, straight or curved on plan exceeding 6.0mtr mean radius complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface incl raking out joints, hacking for key,scrubbing down with water and removing unserviceable material outside cantt area all as specified and directed by Engr-in-Charge. Note: Plaster work may be in patches upto triple storey.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface fininished even and smooth without using extra cement including mixing of integral water proofing compound complete all as specified and directed. Note: WPC shall be measured and paid separately.

M&L for rendering 10 mm thick in CM (1:6) on wall/ concrete surfaces finish even and smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick plaster on ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and directed.

M&L for preparation of newly plastered surface and using sand paper to have even and smooth surface and applying 1.5mm to 2mm thick JK/BIRLA white putty on prepared surface and applying two coats of weather coat paint (Weather coat Exterior emulsion ) white or tinted over a coat of white water base primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of cement based paint over a coat of cement primer complete all as specified and directed.

M&L for applying two coat of oil bound distemper over a coat of 1.5mm to 2mm thick wall care putty (JK/Birla) on new plaster surface of walls after -preparation of surfaces complete all as specified and directed.

M&L for preparing new surfaces of wall surfaces and applying three coats of white wash on ceiling and cornices complete all as specified and directed.

M&L for complete removal of existing treatment of wall and applying two coat of exterior weather proof water base emulsion paint white/coloured over a coat of oil base base primer over one coat of white cement based putty (where it is required) complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of exterior weather proof water base emulsion paint white/coloured over a coat of oil base base primer over one coat of white cement based putty (where it is required) complete all as specified and directed.

M&L for complete removal of existing treatment on old decorated surface of wall and applying two coat of oil emulsion distemper white/coloured over one coat of birla wall care based putty complete all as specified and directed. Note:- Putty shall be measured and paid seperately.

M&L for one coat of 2mm thick wall care putty (2 coats of 1mm thick each) on walls/ceiling complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall including brooming, washing, roubbing scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and apply one coat of oil emulsion distemper complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall including brooming, washing, rubbing scraping down with complete removal Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of white wash on walls complete all as specified and directed.

All as per item No. 19.00 above but on ceiling.

M&L for preparation of old painted surfaces of wood/wood based materials exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

All as per item No. 21.00 above but on steel surfaces.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land complete all as specified and directed.

M&L for 75 mm thick PCC1:4:8 type D-2 using 40mm graded as in foundation, sub base of floor, etc complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C2, with using 40mm graded stone aggregate as in floor/ plinth protection finish the surface even and smooth without using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified and as directed.

M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base, levelling course, etc complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matchand over and including 15mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of old existing floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store yard and rubbish of the primeses complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 including dismantling of old existing floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store yard and rubbish of the primeses complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1: 6 including dismantling of old existing floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store yard and rubbish of the primeses complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300x200x7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10 mm thick backing coat on fair faces of brick work in CM (1:4) including dismantling of old existing floor, hearth , or wall tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store yard and rubbish of the primeses complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 450x350 or 300x450x 7 to 8 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10 mm thick backing coat on fair faces of brick work in CM (1:4) and dismantling of old existing floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store yard and rubbish of the primeses complete all as specified and as directed.

Dismantling of old laid bedded and pointed in any mortar Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and as directed.

M&L for 20 -25 mm thick kota stone, machin cut kota stone slab flooring mirror polished over and including 15mm cement screed base laid in CM 1:6 , and jointed in neat cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.

M&L for 20 mm thick granite (green marble) thick machine cut, in floor bedded and jointed with grey ement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing of approved quality of any size set and jointed in grey cement slurry laid over and including 15 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges compete all as specified and as directed.

M&L for 20 mm thick granite thick machine cut, 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing of approved quality of any size set and jointed in grey cement slurry laid over and including 10 mm thick backing in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges compete all as specified and as directed.

S&F in repairs rotational moulded polyethylene water storage tanks (two layers) of capacity of 500 liters (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling of old unserviceable water tank all as specified in SSR Part I, complete all as specified & directed.

Cleaning and removing all dirts and scales from service water tanks and from mouth of circulating pipes etc capacity of tank exceeding 250 ltr but not exceeding 500 ltr complete all as specified and directed.

S&F in repairs 15mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. (Min Weight 15mm-142 gms) complete all as specified and directed.

S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. (Min Weight 20mm-210 gms) complete all as specified and directed.

S&F in repairs steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,for 15mm bore pipes complete all as specified and as directed.

All as per item No 40.00 above but 20mm bore.

S&F in repairs 15 mm CP long neck bib taps screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm bib taps cast copper alloy, screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixedcomplete all as specified and directed.

S&F in repairs angle/stop valves fancy type chromium plated with long shanks fixed with 15 mm dia bore pipes complete all as specified and directed.

S&F in repairs pillar taps (swan neck type) cast copper alloy with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specified and directed.

S&F in repairs 15 mm stop cock cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 15mm wall mixture with provision for bath telephone shower and overhead shower complete all as specified and directed.

S&F in repairs 15 mm wash basin mixutre, centre hole, mixing hot & cold water, fancy type, cast copper alloy, chromimum plated with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe etc and fixed complete all as specified and directed.

S&F in repairs concealed stop valves fancy type chromium plated with long shanks and cup fixed with 15 mm dia bore pipes complete all as specified and as directed.

S&F in repairs stainless steel sink, 1.00mm thick for kitchen, with plug, washers and wastes/coupling, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm with bowl size 410mmx 330mmx 160mm fixed with PVC waste pipe complete all as specified and directed.

S&F in repairs stainless steel sink with drainage board , 1.00mm thick for kitchen, with plug, washers and wastes/coupling,waste pipe etc including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm with bowl size 410mmx 330mmx 160mm fixed complete all as specified and directed.

M&L for stainless steel plate rack for kitchen 1 mm thick of best quality with suitable hanging arrangement and fixed to wall complete all as specified and as directed by Engineer-in-Charge.Note:- Size of plate rack should not be less than 900x200x900mm and weight of rack shall not be less than 6.5 Kg each complete all as specified and directed.

S&F in repairs PVC low level flushing cistern of 10 Litres with all internal fittings incl flush pipe and fixing to supply pipe complete all as specified and directed.

Taking down and re-fixing WHB/flushing cistern/EWC/ kitchen sink and similar items at same or other location, including cutting for ends and pinning in and ends of brackets or erecting stand but exclusive of fixing of supply and waste pipes,etc complete all as specified and directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern) white including fixing bolts and connecting to drain pipe, including seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti symphonic pipe etc complete as directed by Engineer-in-Charge.

S&F in repairs vitreous china squatting pan of patern 'Orissa pattern ' size 580x440 mm white with integral foot rests, flush pipe including trap & provn of lime concrete bedding and making good the dismantled surface in PCC 1:2:4 type B-I using 20mm graded stone aggregate as in repair complete all as specified and directed.

S&F in repairs health faucet with flexible pipe of one mtr length including wall hook for EWC complete all as specified and as directed.

S&F in repairs flexible type PVC waste pipe 32 mm bore of pipe for WHB/SINK/urinal, etc complete all as specified and as directed.

S&F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and as directed.

S&F in repairs brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc as complete all as specified and as directed.

S&F in repairs 125 mm size chromium plated shower rose with siwel joint suitable for 15 mm bore GI pipes complete all as specified and as directed.

S&F in repairs plastic water closet seat cover in white colour, closed pattern with flat bottom, and mild steel chromium plated for aluminised hinging device complete all as specified and as directed.

S&F in repairs vitreous China wash basin white flat back size 580x450mm size, including cutting for and pinning in ends with & incl MS adjustable brackets or erecting stand complete all as specified and directed.

S&F in repairs PVC connection 15mm, 450mm long with nuts and washers complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs corner glass shelf (with bracket) complete all as specified and directed.

S&F in repairs 150 mm long ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F in repairs CP grating 100mm dia complete all as specified and directed.

S&F in repairs 25 mm dia aluminium powder coated drappery curtain rod with brass /nickel chrom polish bracket complete all as specified and directed .

S&F in repairs CP waste coupling of size 32 mm dia WHB with long screwed shanks and fly nut fixed in repair complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutter of any discription n exc 1.0 sqm each complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutter of any discription exc 1.0 sqm but nexc 2.0 sqm each complete all as specified and directed.

S&F in repairs 100mm aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed.

All as per item No 75.00 above but 150mm long

S&F in repairs aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruted section and fixing bolt and sliding bolts of extruded section and cast iron - aluminium alloy 300 mm long complete all as specified and directed.

S&F in repairs 150 mm long aluminium handles, cast type, anodised fixed to shutters complete all as specified and directed.

S&F in repairs 100 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

All as per item No 79.00 above but 75mm

All as per item No 79.00 above but 50mm

Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortar 1:4 ,cutting depth not exc 10 cm complete all as specified and directed.

S&F in repairs 40mm dia cupboard knobes fixed with nuts, screw and washer of MS, bright finshed complete all as specified and directed.

S&F in repairs floor door stopper 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor complete all as specified and directed.

S&F in repairs Mild Steel Door Spring 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Taking down shutters of any description n.exc 1.0 sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1.0 sqm but n.exc 2.0 Sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area n. exc 1.5 sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area exc 1.5 but nexc 4.0 sqm each complete all as specified and directed.

S&F 2nd class hard wood as in plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F 2nd class hard wood 35 mm thick glazed and skeleton (doors) factory made shutters, open rebated and prepared to receive glass gauge etc, (with sash bars) edges of framing plain, chafered or rounded , fitted with cut and mitred beads for securing glass etc, size of members of shutter as specified in SSR Part I, Section 8, clause 8.2 (a) Supplied and fitted to chowkats complete all as specified and directed.

S&F 30mm thick factory made, 2nd class hard wood, glazed and skeleton window/ventilator shutters, open repeated and prepared to receive glass,gauze etc (with sash bars) edges of framing plain, chamfered or rounded ,fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR part-I section 8,clause 8.24 (b) and for window and fixed with chowkats, chemically pressure treated complete all as specified and as directed.

S&F 35mm thick 2nd class hard wood plain, framed pannelled factory made shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

S&F 100 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

All as per item No. 97.00 above but 75mm.

S&F 300 mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F stainless steel butt hinges 100mm size medium weight and fixed as complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section, 150mm long complete all as specified and directed.

All as per item No. 101.00 above but 200mm long.

S&F extruded aluminium alloy handles fabricated type anodised 100 mm size complete all as specified and directed.

All as per item No. 103.00 above but 150mm size.

S&F second class hardwood small fittings such as door and window stops and the like n.exceeding 200 cucm each complete all as specified and directed.

S&F galvanised mild steel wire cloth of 0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised I wire staples,etc complete all as specified and as directed.

S&F in repairs 18/19mm thick Prelaminated particle board, Exterior grade,prelaminated one side with decorative choice lamination &other side balancing white lamination,fixed with screws to timber frame work complete all as specified and as directed.

S&F in repairs 18/19mm Veneered particle boards interior grade,solid core, general purposes type, faced with decorative veneers on one face of type 'BB', fixed with screws to timber frame work complete all as specified and as directed.

S&F in repairs veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work 12mm fixed with screws to timber frame work complete all as specified and as directed.

S&F in repairs block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on both faces for 18/19mm fixed with screws to timber frame work fixed complete all as specified and as directed.

S&F in repairs 2nd class hard wood beads, straight (exc 40 Sqcm) for glazed or gauzed joinery, renewed, including mitres etc.. and removing old beads to Storeif in repairs or if refixed in old position complete all as specified and as directed.

S&F in repairs good quality stainless steel self closing hinge of 75 mm size for PVC door shutter complete all as specified and as directed.

S&F in repairs 50 X 15 mm size magnet door catcher for closing for PVC door shutter complete all as specified and as directed.

S&F in repairs 100 mm size MS mat / glossy finish handle complete all as specified and as directed.

S&F in repairs sheet glass 3.0 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.5 Sq.M in each pan incl hacking out old glass complete all as specified and directed.

S&F in repairs figured glass pine head type 3.0 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.5 Sq.M in each pan complete all as specified and as directed.

S&F in repairs stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed.

M&L for preparing new or previously untreated surfaces of wood and wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer with and including wood putty complete all as specified and directed.

Cleaning of blockage sewage pipe line (RCC/SGSW) of upto 300mm bore by means of sewage cleaning jet machine / compressors/Drain jetters Pumps and clean out the sluge /liquid mud or any other obstruction material to any depth including nesesarry rodding, working in foul position and depositing of sludge/silt/liquid mud beyond the premises of MOD land etc complete with all specified pressure rating and complete all as directed by Enge-in-charge.

Taking out of solid/semi solid sludge from existing manholes of any size and any depth and burying the entire sludge/sludge water into excavated pit of adequate size including excavating and covering with earth or disposing off into covered vehicles outside the pheripheri of defence land to a distance exceeding 1 KM including taking off RCC/iron manholes covers and refixing the same after cleaning complete all as specified and directed by Engineer-in-Charge.

Cleaning of blockage of EWC/IWC/urinal/bathroom/kitchen and gully trap and removing of sludge/spoil/waste to distance exc 100 mtr and testing of WC block for proper working after cleaning complete all as specified and directed by Engineer-in-Charge.

Removing the manhole cover (CI or RCC), any type of manhole rectangular/circular and de-watering of septic tanks and soakage wells of any size and depth by means of hydraulic jet pressure machine by plugging inlets as required, making it fully functional to the entire satisfaction of Engineer in charge including carrying the effluent outside the defence land in closed containers adn re-instating the manhole cover to its original position complete all as specified and directed by Engineer-in-Charge. Note:- Tthe quoted rates includes for keeping the particular septic tank and soakage well undertaken once for de de-watering functional for full contract period.

All as per item No. 122.00 above but de-sluding of septic tanks and soakage wells complete.

Excavation in trenches n.exc 1.50m wide and n.exc 1.50m in depth for foundation etc and n.exc 10 Sqm on plan and n. exc 1.50m in depth and getting out in any type of soil complete all as specified and directed.

Returing filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and directed.

Demolition by breaking up drain pipes (salt glazed stoneware or AC/RCC) 150mm dia jointed in cement mortar and taking out of trenches and removing the debris including concrete bed and haunching from the trenches complete all as specified and directed.

All as per item No. 127.00 above but 200mm dia.

M&L for 150mm bore/inner dia Double wall corrugated (DWC) pipe (SN-4) with intergral socket and all necessary fttings, laid in trenches jointed as per manufacturer instruction confirming to IS 16098 (Part 2) complete all as specified and directed.

All as per item No 129.00 above but 200mm bore.

M&L for 150mm internal dia salt glazed stone ware drain pipe Class A laid in trenches on concrete bedding jointed in cement mortar 1:1 complete all as specified and directed.

All as per item No 131.00 above but 200mm bore.

M&L for concrete bed to drain pipes of bore 150mm dia including packing under hunching against the sides of pipe after they are laid tested in cement concrete 1:4;8 type C-2 using 40mm graded stone aggregates complete all as specified and directed.

All as per item No 133.00 above but 200mm bore.

M&L for PCC 1:2:4 type B-1 (using 20mm graded cruched stone aggregate) as in benching, coping etc including necessary form work complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position (Reinforement cut as required to facilitate demolition) complete all as specified and directed.

M&L for pre-cast RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in manhole cover slab fixed in position including necessary form work and set in CM 1:6 complete all as specified and directed. Note: Reinforcement will be measured and paid separately.

S&F mild steel TMT 10mm dia and over cut to length, bent to shape, required including cranking, bending, spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F mild steel TMT bars 6 to 8mm dia cut to length bent to shape required including cranking bending spirally for hooping for column hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S&F in repairs PVC SWR pipe single socket of 110mm dia in any length with rubber washer ring joint fixed to wall complete all as specified and directed.

All as per item No 140.00 above but 75mm dia.

S&F in repairs PVC SWR bend of 110mm dia complete all as specified and directed.

All as per item No 142.00 above but 75mm dia.

S&F in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement of 75 mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F in repairs vitreous china bowl urinal flat back,size of 465x355x265mm white including waste pipe 32mm dia GI pipe, grating and brass union for discharge pipe complete including providing and fixing plug bedding urinal against wall in cement mortar 1:2 securing urinal to plug with and including 60mm long brass screw pointing around urinal back in cement etc complete all as specified and directed by Engr-in-charge.

S&F in repairs PVC low level flushing cistern valve less,syphonic action type of 10 ltrs capacity white with inlet, ball valve, float and handle including cast iron brackets, PVC flush pipe 32mm dia ,PVC connection (15x 450 mm) long complete all as specified and directed.

S&F in repairs Pillar tap fancy type chromium plated with capstan head,screwed down high pressure with long screwed shanks and fly nuts,screwed for iron pipes 15 mm bore dia.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing unserviceable material outside cantt area all as specified and directed by Engr-in-Charge.

M&L for machine pressed precast conctete interlocking paver block with grey cement and pigment , any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for chequered coloured cement concrete tiles 40cm x 40cm x 25mm thick, set, jointed and pointed in cement slurry in floors with grey pigment cement and pigments over and including 15mm thick screed bed or bedding layer of CM 1:4 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles finish complete all as specified and directed.

M&L for plain cement concrete in type E-2, 1:5:10 (using 40 mm graded stone aggregate) as in foundation, sub base etc complete all as specified and directed.

vikas traders (BID ID -3432420)

M/S Parikshit Sharma (BID ID -3425138)

M/S Sunshine Construction (BID ID -3432507)