8567/GWL/E8 PROVN OF SECURITY LIGHTS WITH POLES AND SOLAR LIGHT AT MORAR CANTT UNDER GE GWALIOR

Amount

Supply and fixing All in one integrated Solar Street light of capacity 30 W in extruded aluminium construction with high effieciency monocrystaline silicon photo coltaic panel, High Efficiency SMD LEDs 6500 K having secondary lens optics for street lighting distribution, high performance lithium battery MPPT charge controller and intelligent control module/sensor with ihgher reliability, long service life, suitable for easy and quick installation. Make - CAT Part No : WIPRO LR 14-441-XXX-65-XX, Bajaj/Philips/ Havells.

Supply and erecting 6 mtr height octagonal Steel Pole with base plate, bottom size 185mm, Top dia 75mm and sheet thickness 10mm.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with conductor of size 16.00 sqmm 4 core stranded aluminium

Excavation in trenches n.exec 1.5 m wide and n.exec 1.5 m in depth for laying of cable in soft/loose soil and getting out complete all as specified and directed

Excavation in trenches n exc. 1.5 m wide but exc 1.5m deep but n.exec 3.0 m deep for erection of pole in soft/loose soil complete all as specified and directed.

R & F in, incl spreading, levelling, watering and well ramming in layers n.exec 25 cm complete all as specified and directed.

Removal of excavated material n.exec 50 m and depostitng where directed at a level n.exec 1.5 m above the starting point complete all as specified and directed

M&L for sand cushioning in trenches for cable protection including consolidation complete all as directed.

M&L for Sub class 'B' bricks laid dry width wise across the line of cable in treanchs as cable protection complete all as specified and directed by engr in charge.

M & L for Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-31 (9 metres long) all as specified and directed.

M&L for cement concrete (1:4:8), type D-2, using 40 mm graded crushed stone aggregate for foundation of poles/struts/stay assembly etc all as specified and directed.

M&L for cement concrete (1:3:6), type C-1, using 20 mm graded crushed stone aggregate for pedestal of poles/coping including necessary form work, fair finishes to the exposed surface using extra cement all as specified and directed

Supply and fixing of 72 Watt new generation energy saving and environmental friendly long life LED street light made up of pressure dia cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENING separate driver compartment with IP 66 protection and impact resistance of IK 07 with 10 KV Built-in-SPD. Make : Philips (CAT Part No : BRP410 LED CW 072 MR FG S1 PSU GR ) /Wipro/Havells.

M&L for bending & shaping of 25 mm dia galvanised iron pipe light grade over all length 0.60 mtr including necessary clamps, brackets and bolts mtr etc to fixed on wall/pole as per site requirement including fixing on pole with light fittings

S & F Junction box for mounting on tublar pole including FI clamps, nut, bolt & washers mtrl etc with suitable size of MCB 20 to 40 Amps

S & F PVC Twin core copper conductor 4 Sqmm alongwith PVC pipe for protection of cable.

M & L for pole painting surfaces of any description steel, iron etc . After preparation surface of poles including pole fittings such as brackets, nut, bolts etc. incl scrapping and rubbing etc and applying two coats of aluminum paint complete all as directed.

S & F Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to GI strip of size 32x6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 5 of MES Schedule Part-I connecting to earthing point and testing on completion with and including 40 mm bore light grade G.I. protection pipe (0.5 metre beyond pit to main switch), PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 Nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work, complete.

S&F of automatic street light/security light switch using nature switch for automatic switching of street lights base on LUX level of Natural light. The infrared sensor based nature switch alongwith suitable power contactors and MCBs (Input-Output) should be enclosed in pole/wall mountable enclosure made of rust proof, electric shock proof, termite proof and FR grade SMC junction box (sintex make) conforming to IP 54. The contacor, MCB and copper circuit wiring (min 10 Sqmm) should suitable enough to take 3 phase load of 8 KW, contactor rating 25-32 Amps per phase, MCB (SP) RATING 32 Amps (03 Nos). Make of Nature Swittiya Energy Sustem Pvt Ltd/Bajaj. Contactor : BCH/L&T/Schneider or equivalent. MCBs: Schneider/L&T/BCH or equivalent. Circuit wiring : Finolex/Polycab or equivalent

M&L for GI pipe Med grade of 25 mm dia alongwith all fittings and fixtures complete laid in trenches all as specified and directed. (Make: TATA, Jindal, Prakash)

M&L for gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete of size 25 mm dia all as specified and directed. (Make : Leader, Zoloto, BIR)

M&L for chess cutting of bituminous road for laying of GI pipe line and making good disturbed surfaces by appying PCC 1:2:4 of using cement aggregate of 20 mm dia complete all as specified and directed.

Jyoti enterprises