Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹43.0 LAccepted-AOC 4943 OPP JAIN JEWELLERS POST OFFICE BAZAR BATHINDA 151001 PB | BATHINDA | BATHINDA | PUNJAB | 151001 | L-1 | Accepted-AOC Being lowest and reasonable. | |
| 2 | L-2₹44.4 L+₹1.4 L (3.24%)Rejected-Finance HOUSE NO 8 589 BEHIND PHC HOSPITAL OLD BUS STAND KORBA KORBA CHHATTISGARH 495678 | 495678 | L-2 | Rejected-Finance Not being lowest bidder. | |
| 3 | L-3₹47.1 L+₹4.1 L (9.43%)Rejected-Finance 1000 PUDA MODEL TOWN PHASE 5 BATHINDA 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | L-3 | Rejected-Finance Not being lowest bidder. | |
| 4 | L-4₹56.4 L+₹13.4 L (31.2%)Rejected-Finance 01 ENTERPRISES | L-4 | Rejected-Finance Not being lowest bidder. | |
| 5 | L-5₹58.8 L+₹15.8 L (36.6%)Rejected-Finance | L-5 | Rejected-Finance Not being lowest bidder. |
Tender Value
₹80 L
EMD Value
₹1.4 L
Closing Date
11 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Bathinda
HQ CWE Bathinda Bathinda Mil Stn
REPAIR TO PARAPET WALL AND ROOF SLABS OF OTM-04 TO OTM-09 AND REPAIR TO JOINERY WORK TO CERTAIN BLDGS UNDER ZONE M OF GE (N) BATHINDA AT BATHINDA MIL STN
2024_MES_640124_1
CWE BTD/TOKEN-61/2023-24
Open Tender
Civil Works
Item Rate
270 days
Bathinda Mil Stn
As per NIT
7 documents required · 7 mandatory
₹1,000
GE (North) Bathinda
₹1.4 L
HQ CWE Bathinda
13 May 2024
1 Feb 2024
13 Mar 2024
1 Feb 2024
11 Mar 2024
26 Feb 2024
15 Feb 2024
Amount
Dismantling of Brick Tiles terracing in single layer on roof laid and pointed in cement mortar and removing / disposal off from the site complete all as specified and as directed by Engineer-in-charge.
Demolition of mud from roofs, any thickness, including plastering and leaping (whether full thickness removed or only a part there of) including removing / cutting uprooting grass, vegetations and roots of small plants etc on roof floor and surrounding / parapit wall etc, including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for Roughening surfaces of existing concrete surfaces of roof by picking , sweeping , clean and washing down with water to remove dust etc and brushing with neat cement slurry @ 3.0 Kg of cement per Sqm complete all as specified and directed by Engineer-in-charge. Note: The rate of neat cement slurry @ 3.0 Kg of cement per Sqm is included in this item and nothing shall be paid extra on this account.
Material and labou for cement concrete (1:2:4) type B-0, using 12.50 mm graded stone aggregates as in roof padding including mixing with Water Proof Compound as per manufacturer's instructions and finished even and fair complete all as specified and as directed by Engineeer-in-charge. Note :- Water Proof Compound shall be measured and paid for separately under respective item of Schedule'A' BoQ..
Material and labour for lime concrete terracing using brick aggregate and surkhi as specified in clause 11.11 and laying as specified in clause 11.27 of MES Sch Part-I (2009) minimum thickness at edge 40mm and increasing uniformly towards ridges to obtain a chain slope 1:40, the top shall be trowelled with the addition of jaggery solution and finished smooth complete all as specified and as directed by Engineer-in-charge.
Material and Labour for 15 mm thick screed bed or bedding layer in cement mortar (1:4) on roof surfaces, parapet or vertical beam surface (horizontal or vertical) finishing the surfaces even and fair complete all as specified and as directed by Engineer-in- charge. (Note :- Coarse sand (Toka sand) as approved by GE only shall be used in screed bed/plastering .)
Material and labour for tack coat layer of blown grade bitumen of any penetration applied hot @ 1.70 Kg per Sqm and priming the surface @ 0.30 Kg per Sqm and with and including material and labour for laying 3mm thick APP based polymer membrane of weighing not less than 3.5 Kg per Sqm reinforced with polyster non woven fabric (weight not less than 150 Gm per Sqm) laid on primed surface at by torch application with side overlap 75mm and end overlap 100mm and tucked into the chasesas a treatment for moderate condition complete all as specified and as directed by the Engineer-in-Charge. Note: The rate of 3mm thick APP based polymer membrane is included in this item and nothing shall be paid extra on this account.
Material and labour for 40mm thick brick tiles laid / bedded over and incuding 15mm thick screed bed in cement mortar 1:6, over existing lime concrete surfaces of roof, including joints grouted flush in cement mortar 1:3 mixed with and including liquid Water Proof Compound @ 200ml per bag of cement of 50kg and including flush pointing as work proceed with same material complete all as specified in clause 11.27.3 of MES Sch Part-I (2009) complete all as specified and as directed by Engineer-in-Charge. Note :- Liquid Water proofing compound shall be measured & paid separately as Supply only under respective item of Schedule'A' BoQ
All as per serial item No. 8 here-in-before but except brick tiles over and incuding 15mm thick screed bed in cement mortar 1:6, over existing lime concrete surfaces of roof, including joints grouted flush in cement mortar 1:3 mixed with and including liquid WPC @ 200ml per bag of cement of 50kg and including flush pointing as work proceed with same material complete all as specified in clause 11.27.3 of MES Sch Part-I (2009) complete all as specified and as directed by Engineer-in-Charge. Note :- Liquid Water proofing compound shall be measured & paid separately as Supply only under respective item of Schedule'A' BoQ . Note : Old serviceable brick tiles retrieved from serial item No 1.00 here-in-before after cleaning shall be used under this item.
Material and labour for cement concrete (1:2:4) type B-0, using 12.50 mm graded stone aggregates as in bands, bedding, benching of manholes, coping, surface channel, roof kerbs or mud stops, rounded or chamfered on edges etc including necessary form work complete all as specified and as directed by Engineer-in-charge.
Material and labour for guniting/ short crating of RCC columns, beams , fins, facias and similar items as per manufacturers instruction average thickness not exceeding 25 mm complete all as specified and directed by Engineer-in-Charge.
Material and labour for guniting/ short crating of RCC columns, beams , fins, facias and similar items as per manufacturers instruction average thickness exc 25 mm but not exceeding 40 mm complete all as specified and directed by Engineer-in-Charge.
Supply only Liquid water proofing compound
Demolition of RCC as in roof slabs (other than ground floors), beams, stair case, landing, chajjas, and similar suspended work (reinforcement cut as required to facilitate demolition) all as specified and directed by Engr-in-Charge.Note:Schedule of credit of scrap iron for this item shall be ascertained by BOO as ordered by GE and same shall be enclosed with Final bill duly countersigned by GE.
Material and labour for Brickwork with sub class 'B' using Fly Ash old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-charge.
Taking down cement or cement lime plaster from brick wall etc including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.
Material and labour for rendering/plastering 15mm thick in cement mortar (1:4) on any face of Brick walls or concrete surfaces including mixing of liquid Water Proof Compound in mortar @ 200ml per bag of cement of 50kg, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. (Note :- Water proofing compound shall be measured & paid separately as Supply only)
Material and labour for preparation of new plastered surfaces of walls/pillars /cornices by brooming down with using broom/sand papering or by any other mean, washing down with water and applying two coats of cement base paint as per approved tint/colour by using paint brush complete all as specified and as directed by Engineer-in-Charge.
Taking up or down existing galvanised steel water tubing (GI pipe) 20mm bore including fitting/connection from wall/ceiling/floor/concealed etc. complete all as specified and as directed by Engineer-in-charge.
Supply and fixing galvanized steel tubing (GI pipe) medium grade 20mm bore ISI marked with all new fittings like elbow, tee, union, socket, reducer etc. and fixed complete to walls, ceiling and laid in floor or concealed in walls including cutting chases in wall (as directed) and making good disturbed surfaces of walls including cutting and threading of pipe complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in replacement rotational moulded polyethylene water storage tank white colour of capacity 1000 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connection and fixing ball valve and gate valve complete all as specified and as directed by Engineer-in-charge. Note: Ball valve and Gate valve shall be measured and paid seperately under respective item of Schedule'A' BoQ .(ii) Labour element for fixing of Ball valve and Gate valve is included in this item and nothing shall be paid extra on this account.
Supply only Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (polythene float) complete, screwed suitable for 20mm bore iron pipe complete all specified and as directed by Engineer-in-charge. Note :- The minimum weight of ball valve shall be as given in SSR or in relevant IS.
Supply only gun metal, globe or gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for 20mm bore iron pipes complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight of gate valve shall be as given in SSR or in relevant IS.
Supply & fixing in replacement 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints for rain water pipe fixed along walls with stack clamps made out of FI 50mm x 5mm and 16mm dia round iron stay (interval of 1m) including nut bolt and PCC work in 1:2:4 Type B-1 using 20mm graded stone aggregates complete all as specified and as directed by Engineer-in- charge.
Supply & fixing PVC (SWR) bends (any radius) suitable for 110mm bore pipe fixed to walls or laid in floor complete all as specified and as directed by Engineer-in- charge.
Supply & Fixing Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed by Engineer-in-charge.
Supply & Fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed by Engineer-in-charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames, wooden/PVC doors/steel ventilator) area not exceeding 1.50 sqm each and removing from site complete all as specified and as directed by Engineer-in- charge.
Supply and fixed solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and as directed by Engineer-in-Charge
Supply and fixed factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing aluminium anodised barrel tower bolt of extruded section, 150mm long complete all as specified & directed by Engineer-in-charge.
Supply and fixing 100mm long powder coated mild steel butt hinges medium weight cold rolled complete all as specified & directed by Engineer-in-charge.
Supply and fixing anodised aluminium handle cast type 125mm long complete all as specified & directed by Engineer-in-charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4 Sqm each and removing from site complete all as specified and as directed by Engineer-in- charge.
Taking down wooden shutters only of any description area exceeding 1.0 sqm and not exceeding 2.0 sqm each complete all as specified and as directed by Engineer-in- charge.
Supply and fixing Pressed steel frames with thickness of steel sheet 1.25mm for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 125mm x 60mm including one shop coat of priming complete all as specified and as directed by Engineer-in-charge. Note:- The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account.
Supply and fixing Pressed steel frames with thickness of steel sheet 1.25mm for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 105mm x 60mm including one shop coat of priming complete all as specified and as directed by Engineer-in-charge. Note:- The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account.
M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate in filling back of PS chowkats/frame and in bed blocks to hold fast complete all as specified and directed by Engineer-in-charge.
Supply & fixing factory made plain framed panelled shutters (two panels as approved), 35mm thick of 2nd class hard wood with lock rail and panel inserts of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401, including 2nd class soft wood kail beading 20mm wide tapering from 10mm to 5mm on one side and also fitted to chowkhat complete all as specified and as directed by Engineer-in- charge. Note : - (i) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge. Primer shall be measured paid separately under appropriate item (painting) of BOQ.
Supply & fixing factory made glazed and skeleton shutter, 35mm thick of 2nd class hard wood open rebated (two panels as approved) and prepared to receive glass, gauge etc, without sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc. Sizes of members as specified in SSR Part-I, Section 8 and fitted to chowkhats, menbers shall be kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and as directed by Engineer-in- charge. Note : - (i) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge. Primer shall be measured paid separately under appropriate item of BOQ.
Supply & fixing galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staples complete all as specified & directed by Engineer-in- charge.
Supply & fixing in repair galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staples complete all as specified & directed by Engineer-in- charge.
Supply & fixing mild steel 300mm long rat tail rod pattern spring including roller and roller plate and fixing to wooden frame with screw complete all as specified and directed by Engr-in-Charge
Supply and fixing aluminium anodised barrel tower bolt of extruded section, 200mm long complete all as specified & directed by Engineer-in-charge.
Supply & fixing aluminium anodised sliding door bolts 250mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed by Engineer-in- charge.
Supply and fixing MS pressed handle oval type, stove enammelled black size 150mm long complete all as specified & directed by Engineer-in-charge.
Supply and fixing Floor door stoper (150mm) of aluminium alloy body and tngue, anodised , with hard drawn steel spring fixed in floor complete all as specified and directed by Engineer-in-charge.
Supply & Fixing for steel window box type double shutter ( glazed with wire gauge)with side hung shutters including hinges with steel handle and steel peg stay complete with glazing bar dovetailed or welded and including window guard bar, tower bolt,flat iron for fixing wire netting with and including one shop coat of zinc chromate primer paint and making good to distrubed portion match with existing surfaces complete all as specified and directed by Engr-in-Charge.
Supply & fixing, factory made steel windows or ventilators, fixed type, with glazing bars, fixing lugs in PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) with and including one shop coat of zinc chromate primer paint and making good to distrubed portion match with existing surfaces complete all as specified and directed by Engr-in-Charge.
Material and labour for preparation of priming Steel and iron surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (1st quality) complete all as specified & directed by Engineer-in- charge.
Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth by cleaning the dust and removing all loose particle with using sanded paper, clean cloths and dry paint brush & applying one coat of synthetic enamel paint (1st quality) of approved tint/colour to achieve glossing finish with using paint brush complete as specified and as directed by Engineer-in-Charge.
Material and labour for Preparation of new wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (1st quality) over a coat of pink primer complete all as specified & directed by Engineer-in- charge.
Material and labour for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth by cleaning the dust and removing all loose particle with using clean cloths and dry paint brush & applying one coat of synthetic enamel paint (1st quality) of approved tint/colour to achieve glossing finish with using paint brush complete as specified and as directed by Engineer-in-Charge.
Providing and fixing aluminium work with Polyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conformikng to IS:733 and IS :1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions i.e at top , bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth , rust free, straight, mitred and jointed mechanically wherever required including aluminium cleat angle, Aluminium snap beading for glazing/ paneling , C.P. brass/ stainless steel screws, all complete all as specified and directed by Engineer-in-charge . Note :- (i) Weight of aluminium sections , aluminium cleat angles, Aluminium snap beading shall be physically ascertained through a board of officers convened by GE and payment shall be made only after ascertaining the actual weight of aluminium at site. (ii) The rate of material and labour for providing the EPDM rubber, neoprene gasket , C.P. brass/ stainless steel screws is included in this item and nothing shall be paid extra on this account. (iii)During considering the weighing of aluminium sections , aluminium cleat angle, Aluminium snap beading , the weight of EPDM rubber, neoprene gasket , C.P. brass/ stainless steel screws shall not be considered for measurments and payments. only the weight of the aluminium sections , aluminium cleat angles, Aluminium snap beading shall be considered and measurment and payment shall be made accourdingly. (iv) Glazing /Paneling shall be measured and paid seperately. (v) During the weighing of aluminium sections , aluminium cleat angle, Aluminium snap beading ,the weight of polyester powder coating 50 micron shall not be considered for weight but the rate of material and labour for providing polyester powder coating 50 micron is included in this item and nothing shall be paid extra on this account. (vi) Powder coated butt hinges, aluminium handles & aluminium peg stays shall be measured and paid seperately under respective itmes of Schedule'A' BoQ.
Supply & fixing 5.5mm thick sheet glass ordinary quality in squares not exceeding 0.5sqm in each pane and fixed with oil putty etc. as required or as directed complete all as specified & directed by Engineer-in- charge.
Supply & fixing aluminium (extruded section) body door closer machine hydraulically regulated, designation No 3, universal type suitable for door shutter of 851 to 1000mm in width and weight between 61 to 80 Kg, ISI marked complete all as specified & directed by Engineer-in-charge.
Repair and Re-fixing of existing aluminium door/window shutter in same opening including necessary joining cleats, glazing clips, rubber neoprene packing, handles, hinges, anodised aluminium snap beading, screws etc complete all as specified and directed by Engr-in-Charge
Dismantling wall and ceiling board (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets fixed in any position with nails fixed with screws complete all as specified and as directed by Engineer-in-charge.
Supply and fixing anodised aluminium snap grid frame work of size of grid 605mm x 605mm for false ceiling including necessary notching and prepared holes, the snap grid shall consist of anodised aluminium main tee of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/RM, cross and Intermediate tee of size 23.5mm x 26.4mm x 1.4mm weighing 0.191 Kg/RM. The main and cross tee shall be jointed at junction with steel screws or MS bolts, nuts and washers, the snap grid (main / cross tee sections) shall be supported at ends all along the wall with anodised aluminium angle of size 35mm x25mmx 2mm weighing 0.36 Kg/RM fixed to wall with suitable arrangement and duly suspended with 4mm GI wire hangers (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including providing 12mm thick gypsum board in grid fixed in false ceiling grid made of aluminium as per above specifications complete all as specified and as directed by Engineer-in-charge.
Supply and fixing hollow PVC lining consisting 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame, complete all as specified and as directed by Engineer-in-charge.
Dismantling of floor hearth or wall tilling including cement mortar bedding but not backing including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge
Material and Labour for Non skid coloured ceramic tiles ,10 mm thick (square or rectangular), area of each tile not exceeding 0.36 Sqm , in floors etc. set and jointed in neat cement slurry @ 3 Kg/ Sqm and pointed in white cement with pigments to match the shade of tile laid over and including 10 mm thick Screed bed or bedding layer in CM (1:6) complete all as specified and as directed by Engineer-in- charge. Note: Only coarse sand as approved by GE shall be used in screed bed.
Material and Labour for Glazed ceramic coloured tiles 10 mm thick (square or rectangular), area of each tile not exceeding 0.36 Sqm , in vertical surfaces such as dado / skirting, set and jointed in neat cement slurry @ 3kg/ Sqm laid over and including 10 mm thick plaster in cement mortar (1:4) pointed with white cement with pigments to match the shade of tiles complete all as specified and as directed by Engineer-in- charge.
Demolition of brick work masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and as directed by Engineer-in- charge.
Material and Labour Brick work with sub class ‘B’using old size Fly Ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in- charge.
Material and labour for rendering/plastering appx 10mm thick (matching with existing plaster thickness) in cement mortar (1:3) on any face of ceiling in patches matching with existing, finished fair and even and smooth without using extra cement, including applying of two coat of white wash to newly plastered surface of ceiling complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for preparing newly plastered or concrete surface of ceiling by sand papering or by the other mean and after preparing the surfaces and applying two coat of white wash with (paint brush /with roller ) complete all as specified & directed by Engineer-in- charge
Material and labour for rendering/plastering appx 15mm thick (matching with existing plaster thickness) in cement mortar (1:6) on old brick or concrete surfaces of walls/pillars /cornices in patches matching with existing, finished even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for newly plastered of walls applying two coats of oil bound distemper (washable) over a coat of alkali resistant priming paint on plastered surfaces complete all as specified and as directed by Engineer-in-Charge.
Material and labour for rough cast plastering including 15 mm thick rendering in cement plaster 1 : 4 complete as specified in SSR Part-I clause 14.22 as given .Note : Rough cast finish : After applying under coat of cement mortar 1:3 not less than 10 mm thick and while still it is in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg. which is generally of size between 6 to 12 mm depending on texture required mixed with coarse sand and cement in the ratio 1:1 shall be applied complete including taking down cement lime plaster and applying two coats of cement based paint over a coat of primerall as specified and as directed by the Engineer-in-Charge.
Hacking out old broken glass from metal frame of any thickness incl punching or drilling out old glazing pins/springs clips and providing and fixing new ones with oil putty all as specified and directed
Supply & Fixing 3.00 mm thick sheet glass ordinary quality ,fixing with oil putty to wooden or steel surface n.exc 0.5 sqm each complete all as specified and directed by Engineer-in-charge.
Supply & Fixing 3mm thick Figured glass pin head type and glazingwith oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-charge.
S&F for venetian blinds vertical sabine of size 100 mm conforming to relevant IS complete with all accessories colour and shade as approved by GE with hanging device for operation, complete all as specified and directed by Engineer-in-charge.
Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender from total amount of Schedule 'A'/BOQ.
M/S BHAGWATI CONSTRUCTION COMPANY
M/s Kamal Builders
Singla Enterprises
AABIA CONSTRUCTION
M/s Verma Construction Company
M/s Balvinder Singh Engineer and Contractors
M/s MITTAL CONSTRUCTIONS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .